# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
I searched the internet to put a hitch on my 2016 Chevy Equinox and found an instructional video from eTrailer.com where they installed on my exact car. I decided to go with eTrailer.com because they answered all my questions and because of the video-I support businesses that go the extra mile with these videos. Shipping was quick and well tracked, however, the box was flimsy and the one end of the hitch had come out of the box side and the ball mount could have easily come out of that hole during shipping. If I were eTrailer.com I'd charge an extra couple of bucks for more sturdy boxes-people will still buy as eTrailer is a well-trusted brand and this would overcome a lot of the negative reviews you'll see on their site about this shipping issue in their own reviews :-) I installed the hitch by myself (definitely recommend help as two people holding it up to the frame makes attaching 100% easier) in about 45 minutes total (out of the box, read instructions, review video again and installation complete). All hardware went on with no issues. Great quality hitch! I also bought the lesser expensive wiring assembly because most recent equinox's come hitch ready with pre-wired assembly in the left side compartment-snap and done. Picked up a new trailer at Home Depot within days and drove 5 feet and the clacking was horrible. I had always had a welded hitch before buying a hitch that took a ball mount. I really thought something was wrong and when I searched the internet that night it turns out this is very common. However, all you need is some sort of hitch "silencing" device. The number of options will drive you mad but I went with the Roadmaster Quiet Hitch and it did the trick for much less than most of the other options. If I were eTrailer.com I'd have that as one of the RECOMMENDED add-ons and explanation why its super-worthy when customers are buying a hitch. Would have saved me the time and hassle of dealing with it later and the extra shipping charge for buying after the fact when I got free shipping for the other items the first time :-) All in all, I'm super, super happy with my hitch, wiring assembly, ball mount, ball mount locking pin and the hitch silencer. Buy with confidence from eTrailer.com Paul R., Syracuse, NY
Ordered a receiver, hitch, ball, and wire harness for my 2017 Chevy Equinox. It was shipped the same day and at my house 2 days later. I installed it in the driveway in less than an hour! To make an already great online purchase better with the tracking info was install videos and directions for all the products I purchased. Etrailer.com saved me $210 over taking it to a local trailer rental retailer.
# 2
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Received my drawtite hitch, draw bar and wiring harness quickly.The draw bar pin was missing, but received excellence service from your customer service department (Sherry). Looks great and can't wait to pick up my trailer and go camping.
got my hitch today everything was in the box. I liked the web site it was easy to use . the installation videos are very helpful ,and it was easy to find the hitch for my car . Thanks Great Job. Mike H
# 3
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
order # 105024469 - my order came in great shape & good service from etrailer--you may need to put foam on steel edges . ups throws boxes around . my order was in great shape .. thank You dan
Very fast shipping. Videos were great for a rookie installer like me. Easy installation. I would definitely buy from etrailor again.
# 4
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Top-notch product. Just completed a 1400 mile trip pulling a trailer with my Chevy Equinox and my etrailer hitch: issue free! That's the best
Just recieved my order. Very fast delivery and well packaged. I will update one I have installed and used the items. I really enjoy the instructional videos. It makes life so much easier.
# 5
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
A great please to order(etrailer.com), very good explanation of product details, fast delivery.
Great company to deal with would recommend them for your trailer hitch needs!!
# 6
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
Quality is excellent. However, it did not work so I am not sure what to do with it. I thought I could use the top hitch for a Bike rack and pull a utility trailer with other toys. The trailer is too close to make a turn so good try but not able to use it. Thank you for asking. I did not open the box for a while because I was having the trailer worked on so assumed I waited too long to return.
# 7
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
I searched the internet to put a hitch on my 2016 Chevy Equinox and found an instructional video from eTrailer.com where they installed on my exact car. I decided to go with eTrailer.com because they answered all my questions and because of the video-I support businesses that go the extra mile with these videos. Shipping was quick and well tracked, however, the box was flimsy and the one end of the hitch had come out of the box side and the ball mount could have easily come out of that hole during shipping. If I were eTrailer.com I'd charge an extra couple of bucks for more sturdy boxes-people will still buy as eTrailer is a well-trusted brand and this would overcome a lot of the negative reviews you'll see on their site about this shipping issue in their own reviews :-) I installed the hitch by myself (definitely recommend help as two people holding it up to the frame makes attaching 100% easier) in about 45 minutes total (out of the box, read instructions, review video again and installation complete). All hardware went on with no issues. Great quality hitch! I also bought the lesser expensive wiring assembly because most recent equinox's come hitch ready with pre-wired assembly in the left side compartment-snap and done. Picked up a new trailer at Home Depot within days and drove 5 feet and the clacking was horrible. I had always had a welded hitch before buying a hitch that took a ball mount. I really thought something was wrong and when I searched the internet that night it turns out this is very common. However, all you need is some sort of hitch "silencing" device. The number of options will drive you mad but I went with the Roadmaster Quiet Hitch and it did the trick for much less than most of the other options. If I were eTrailer.com I'd have that as one of the RECOMMENDED add-ons and explanation why its super-worthy when customers are buying a hitch. Would have saved me the time and hassle of dealing with it later and the extra shipping charge for buying after the fact when I got free shipping for the other items the first time :-) All in all, I'm super, super happy with my hitch, wiring assembly, ball mount, ball mount locking pin and the hitch silencer. Buy with confidence from eTrailer.com Paul R., Syracuse, NY
Ordered a receiver, hitch, ball, and wire harness for my 2017 Chevy Equinox. It was shipped the same day and at my house 2 days later. I installed it in the driveway in less than an hour! To make an already great online purchase better with the tracking info was install videos and directions for all the products I purchased. Etrailer.com saved me $210 over taking it to a local trailer rental retailer.
# 8
Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs
Arrived earlier than promised, fits and functions as it should. A little disappointed in the finish. The powder coating was already flaking off in the package and some rust starting. It's going to get beat up anyway in use, but still. My old crome plated one did not have this issue.
The Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs - C45019 is idle for pulling a utility trailer for most around the house yard work just remember to follow all safety rules.
# 9
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 10
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Arrived earlier than promised, fits and functions as it should. A little disappointed in the finish. The powder coating was already flaking off in the package and some rust starting. It's going to get beat up anyway in use, but still. My old crome plated one did not have this issue.
The Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs - C45019 is idle for pulling a utility trailer for most around the house yard work just remember to follow all safety rules.
# 11
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 12
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
Great company to deal with would recommend them for your trailer hitch needs!!
Received my drawtite hitch, draw bar and wiring harness quickly.The draw bar pin was missing, but received excellence service from your customer service department (Sherry). Looks great and can't wait to pick up my trailer and go camping.
# 13
Curt Class II Drawbar - 5" Rise - 11-5/8" Long - 3,500 lbs
Arrived earlier than promised, fits and functions as it should. A little disappointed in the finish. The powder coating was already flaking off in the package and some rust starting. It's going to get beat up anyway in use, but still. My old crome plated one did not have this issue.
The Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs - C45019 is idle for pulling a utility trailer for most around the house yard work just remember to follow all safety rules.
# 14
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
I ordered this item just before midnight on a Saturday, it shows up Wednesday morning at 9am. Super fast shipping, reasonable prices, virtually any kind of towing anything that you could ever need, & the customer service was great. Computers are not my thing at all, but their website made my search and eventual purchase an absolute breeze. I highly recommend them, and I will most definitely shop here again!!
Thank you George and etrailer. Very fast and timely delivery, only 2 days from ordering!! Product took 1 1/2 hours to install, with the assistance of my 13 year Grandson. We are ready to use the hitch this summer. Future trailer needs will be sought thru etrailer.
# 15
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
Arrived earlier than promised, fits and functions as it should. A little disappointed in the finish. The powder coating was already flaking off in the package and some rust starting. It's going to get beat up anyway in use, but still. My old crome plated one did not have this issue.
The Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs - C45019 is idle for pulling a utility trailer for most around the house yard work just remember to follow all safety rules.
# 16
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
The Class II Drawbar is working great with our 2016 Chev. Equinox. Thanks.
Arrived earlier than promised, fits and functions as it should. A little disappointed in the finish. The powder coating was already flaking off in the package and some rust starting. It's going to get beat up anyway in use, but still. My old crome plated one did not have this issue.
# 17
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 3,500 lbs
Arrived earlier than promised, fits and functions as it should. A little disappointed in the finish. The powder coating was already flaking off in the package and some rust starting. It's going to get beat up anyway in use, but still. My old crome plated one did not have this issue.
The Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs - C45019 is idle for pulling a utility trailer for most around the house yard work just remember to follow all safety rules.
# 18
Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs
The Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs - C45019 is idle for pulling a utility trailer for most around the house yard work just remember to follow all safety rules.
Very well built and finished. Excellent value for the price. Curt builds an excellent product. Would highly recommend
# 19
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
Not that many non-adjustable option for a 12” drop and this one is the best! Love the cushion and it’s very strong. I put that to the test today when I got rear ended with it in the back of my truck. This thing saved the back of my Ram. Came right back to etrailer and ordered a new one!
Needed a large drop hitch to pull my car trailer. This item came quickly and worked perfectly.
# 20
Convert-A-Ball Ball Mount for 2" Hitches - 8-3/4" Rise - 10" Drop - 8,000 lbs
Works great. Needed the drop to tow a utility trailer at level.
As always etrailer has the best products, best information and customer service, plus fast shipping! Thank you again!
What our customers are saying:
"very easy to shop"