Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs

See what our Experts say about this CURT Trailer Hitch Ball Mount

• Recommended Trailer Hitch And Wiring For 2017 Audi A4 Avant
  The Curt Trailer Hitch Receiver, part # C11448 is a confirmed fit for your 2017 A4. This is a Class l hitch and it has a 1-1/4 inch receiver opening. I recommend the Draw-Tite Sportframe Trailer Hitch, part # DT24950 over the Curt hitch because Curt requires the use of a stabilizer strap like part # 18050 for all non-trailer loads. It can be very difficult to find a good attach point on some vehicles. If you are planning on towing I recommend a ball mount like part # C45019. This ball...
  view full answer...
• Interchangeable Hitch Ball and Ball Mount Recommendation for a 1-1/4 inch Hitch
  Sounds like you are looking for a multi-ball ball mount similar to the part # PS80425 but for a 1-1/4 inch hitch instead. I have a solution for you, but there are no ball mounts like that for the 1-1/4 inch hitches. Instead you would need a ball mount like the part # C45019 which fits 1-1/4 inch hitches and then an interchangeable ball set like part # 800B.
  view full answer...
• Dimensions For 1-1/4" Ball Mounts From Ends Of Mount To Receiver Hitch Pins
  Here are the measurements for each of the ball mounts that you requested. I took measurements from the center pin to both ends of the ball mount. I have included images with the measurements as well. Draw-Tite Drawbar # 36051 8-3/8" and 1-15/16". Curt Class II Drawbar # C45519 10-3/4" and 1-1/2". Draw Tite Drawbar # 36053 11-1/16" and 2". Curt Class I Drawbar # C45019 10-7/8" and 1-7/16".
  view full answer...
  
• How Much Does the Curt Trailer Hitch # C45019 Weigh
  I spoke with my contact at Curt and he informed me that this Curt Trailer Hitch without the drawbar, part # C45019, weighs approximately 50 pounds.
  view full answer...
• Ball Mount and Hitch Ball to Fit Curt Class I Trailer Hitch Receiver
  The Curt Trailer Hitch Receiver # C11169 is a Class I hitch so it will use a Class I, 1-1/4 inch ball mount. The size of the hitch ball you need will depend on the exact ball mount you choose. For example, if you use the Curt Ball Mount # C45019 it has a 3/4 inch ball hole diameter so you can use # C40001 for a 1-7/8 inch ball or # C40018 for a 2 inch ball. Both have a 3/4 inch shank. When choosing a ball mount you'll want to make sure you get one with the rise or drop you need based...
  view full answer...
• Curt Trailer Hitch For 1999 Honda Civic Hatchback
  The # C11209 measures 6-1/8 inch of clearance from the mounting surface on the frame to the bottom of the safety chain loops under the hitch receiver opening. You can measure from the frame downward to see where you will wind up with the bottom of the hitch. This is a Class l hitch, it has a 2,000-lb towing capacity and a 1-1/4 inch receiver opening. You will want to make sure you do not exceed the towing capacity of your Civic. Curt requires that a stabilizing strap like part # 18050...
  view full answer...
• Recommended Ball Mount for Harley Davidson with 1-1/4 Inch Hitch Receiver
  We currently do not carry any stainless steel or chrome ball mounts for the 1-1/4 inch receiver size. We do however have many options that have the black power coat similar to the frame of your Harley Davidson and chrome hitch ball options to give you that chrome accent. I recommend the Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs # C45147 or the euro ball style ball mount # C45552. Both of these give you a 2 inch hitch ball. If you want the 1-7/8 inch...
  view full answer...
• Can A Ball Mount be Flipped for the Correct Amount of Rise/Drop
  The Curt Class I Drawbar part # C45019 can be installed right side up which will give you a rise of 5/8" or upside down which will give you a drop of 1-1/4". However, the above ball mount is only rated for use with trailers up to 2,000 lbs therefore I cannot recommend you use this ball mount to tow a 2,500 lb trailer. For a similar ball mount with equal rise/drop, I recommend the Draw Tite Drawbar part # 36053 which is rated for use with trailers up to 3,500 lbs. I have attached a review...
  view full answer...
• Is Curt Trailer Hitch Receiver Compatible with 2010 Mini John Cooper Works Clubman R55
  The Curt trailer hitch receiver, part # C11387, fits all models of the 2010 Mini Cooper Clubman including your John Cooper Works Clubman R55. The hitch installs behind the bumper fascia and the exhaust isn't in the way at all. I've linked a video of the install process on a 2013 Clubman as well as the install details. Also, Curt requires that you use a support strap, part # 18050, if you're using it to carry a bike rack or cargo carrier. If you're going to be towing a trailer with your...
  view full answer...
• How Thick is the Steel Used to Make the Shank of Curt Ball Mount # C45019
  The wall thickness of the Curt ball mount # C45019 is 1/4 inch. It can vary slightly because of the black powder coating.
  view full answer...
• Recommended Trailer Hitch For 2009 Mini Cooper S Clubman
  The trailer hitch that is confirmed to fit your 2009 Mini Cooper S Clubman is the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11387. If you will be using this hitch for towing, I recommend the Curt ball mount # C45019 along with hitch ball # C40001 for 1-7/8 inch or # C40018 for 2 inch diameter. You will also need a pin and clip like # F-4. For wiring, I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This will protect...
  view full answer...
• Recommended Trailer Hitch For 2012 Chevrolet Sonic
  There were two models of the Chevrolet Sonic lt in 2012. One is a 4-door sedan and the other model is a 5-door hatchback. If you have a 4-door sedan then the trailer hitch I recommend is the Curt part # C11240. This is a Class l trailer hitch and it has a 1-1/4 inch receiver opening. For a 5-door hatchback I recommend the Draw-Tite # 24878. This is also a Class l hitch with a 1-1/4 inch receiver opening. If you end up with a Curt hitch, Curt requires a stabilizing strap like part...
  view full answer...
• What Is The Class Rating And SAE Certification Of The Curt Class I Trailer Hitch Receiver, # C11387
  The Curt Class I Trailer Hitch Receiver, # C11387, is a Class I hitch with a SAE J684 Certification. I called the supplier (Curt) about the SAE certification and they said the J684 certification is a federally mandated certification that has to be on all trailer hitches. The Curt Class I Trailer Hitch Receiver, # C11387, will fit the 2008 Mini Clubman. It has a gross towing weight of 2,000 lbs. and a tongue weight of 200 lbs. If this hitch is used for non-trailer loads, like bike racks...
  view full answer...
• Does Curt Hitch C11448 Fit a 2017 Audi A4 All Road
  We do offer a 1-1/4-inch light-duty Class I hitch for the 2017 Audi A4 Allroad. My technical contact at Curt confirmed that their Class I hitch # C11448 is a fit and will work well. If you are planning on towing I recommend a ball mount like part # C45019. This ball mount has a 5/8 inch rise or 1-1/4 inch drop and measures 9-3/4 inches long. For a hitch pin and clip you can use part # F-4. For a 1-7/8 inch hitch ball I recommend part # C40001 and for a 2-inch ball I recommend part # C40018....
  view full answer...
• Will Loaded Hollywood Racks Over-the-Top Rack Interfere with Trailer Towed by 2014 Subaru Forester
  There are a few factors that will determine how far back the bikes will be from the rear of your 2014 Subaru Forester. The bike in the last position could be as much as 36 inches from the end of the vehicle to the furthest out part of the bike. You can adjust the cradles to bring the bikes closer towards the vehicle. And you can also use a longer ball mount so that the trailer is a little further back. If you have the factory Class I Subaru hitch then you could use ball mount # C45019...
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?