bing tracking image
  1. Trailer Hitch Ball Mount
  2. CURT
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 3 Inch
  6. Rise - 2 Inch
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 3,500 lbs

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 3,500 lbs

Item # C45017
lowest price pledge
Retail:$40.49
Our Price: $37.71
You Save: 7%
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 5 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Corrosion-resistant ball mount is 6-1/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers. Lowest Prices for the best trailer hitch ball mount from CURT. Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 3,500 lbs part number C45017 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (1776)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch Ball Mount - C45017

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 3 Inch
  • Rise - 2 Inch
  • No Ball
  • Class II
  • 3500 lbs GTW
  • CURT
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Corrosion-resistant ball mount is 6-1/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.


Features:

  • Sturdy, steel construction
  • Corrosion-resistant, black gloss powder coat finish
  • High-quality manufacturing process
    • CNC machined for strong, consistent cuts and welds
    • 7-Stage washing method delivers smooth, clean surface
  • Both drop and rise positions available to ensure level towing
  • Hitch pin and clip or hitch lock sold separately
  • Assembled in USA


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class I or Class II compatible
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 350 lbs
  • Ball hole diameter: 3/4"
  • Length: 6-1/4" from center of hitch pin hole to center of ball hole
  • Distance from center of hitch pin to closest edge of ball platform: 3"
  • Ball platform length: 3-1/2"
  • Rise: 2-5/8" from top of inside of hitch opening
  • Drop: 3-1/4" from top of inside of hitch opening


How to Measure Drop on Standard Ball Mount

D-225 45017 Curt Ball Mount - 1-1/4" - Class II






Customer Reviews

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 6-1/4" Long - 3,500 lbs - C45017

Average Customer Rating:  4.8 out of 5 stars   (1776 Customer Reviews)

Corrosion-resistant ball mount is 6-1/4" long and fits 1-1/4" x 1-1/4" trailer hitch receivers.

by:

Order was processed quickly, delivery was very fast. Although corner of box was damaged, no parts were lost due to proper packing of smaller parts. cost was good. Product quality is very good.




by:

Perfect fit for my new Volkswagen ID.4 1st Edition




by:

All equipment was delivered on time. Hitch, wiring harness, receiver and ball. Watched video's on installation of harness and hitch. Went down to my garage and installed both with the help of my girlfriend. Very satisfied with the products and the installation. etrailer supplied the goods and the knowledge. I am very happy that I went this route.




by:

Received hitch receiver and accessories in perfect condition. Installation was very easy. (Especially if you have a lift). I fit this on my 2014 camry SE. Everything fit perfectly. The installation video helped a great deal with measurements. Shipping was fast. I searched around for the best price and etrailer.com had the lowest overall price. Big thanks.




by:

The hitch was just what I wanted. Upside down, it clears bumper and puts the trailer height at level position. Shipping was fast. Thanks.




by:

This is the first drawbar I ever bought. It is solid metal and has a rated capacity much greater than I intend to use it for. It's a Curt product but fits well in my DrawTite receiver.




by:

Delivered quicker than expected. All the dimensions were given on your website, this made it easy for me to chose the right drawbar for my SUV hitch.




by:

I received the ATV drawbar today. It is a well constructed product that will last for many years. Thanks again for you superb service and products.


Comments
Great, no rust. Still looking like new.
Dave M - 08/05/2017


by:

Works great for atv and big utv side by sides has just enough height if you turn it around it wont catch going up and down steep hills .. instead of a hith ball "d" ring comes in handy for pulling towing




by:

Worked good, used it for my ATV fit perfectly to flip over and raise trailers to proper height. Does exactly what I need it to.




by:

Product was as described. Etrailer answered my questions promptly giving me confidence that I was ordering the correct product.




by:

always quality products from etrailer




by:

Exactly what I wanted, fast shipping, good tracking, highly recommend.




by:

Prompt service, competitive pricing, quality items. Thanks!




by:

SUPER deal.... Quality stuff. Thanks a ton....




by:

Exactly as described and very quick shipping. Perfect!




by:

Everything was perfect for my wife's electric scooter. Awesome job team!!




by:

I use it on my 2013 Toyota Camry Hybrid for small pulls.
It works exactly as you'd expect, which is a good thing.

No surprises == 5 stars!




by:

a bit short, close to bumper.


Comments
Curt does offer some longer ballmounts that have an identical rise/ and capacity. The ballmount you purchased as a 6-1/4 inch length, measured from the hitch pin hole laterally to where the ball would attach. They offer one thats an inch longer, at 7-1/4 inches as part # C45521
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
$31.70
or one thats 9-3/8 inches long as part # C45016
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
$32.80
. Either of these would provide more clearance to the vehicle bumper.
-- Etrailer Expert Mike L - 10/09/2018


by:

Good Quality, Exactly as expected




by:

Best price for the thing, seems solidly made, hasn't broken yet.




by:

Wonderful service! Thank you so much!




by:

Great product. Just as I needed. Very prompt delivery




by:

It works.




by:

It works



25
1776
Show More Reviews

See what our Experts say about this CURT Trailer Hitch Ball Mount



  • How to Pick Out Ball Mount for 2015 Chevy Impala to Allow Trailer to be Towed Level
    Sounds like you are in need of a ball mount that offers more rise than the part # C45017 that you are using on your 2015 Chevy Impala. In order to get the correct ball mount you are going to need to take two measurements. The distance from the top of your hitch opening to the ground and the distance from the bottom of the coupler lip on the trailer to the ground when it is sitting level. The difference between these two measurements is the rise/drop you need. I attached a help article...
    view full answer...
  • Hitch Ball Recommendations for Use with the Curt Ball Mount Part # C45017
    For hitch balls for the Curt Ball Mount part # C45017 that you referenced you have a couple recommended options. For a 2 inch diameter hitch ball you would want the part # 19258 this has a shank length of 1-9/16 inches, if you were to ever need a 1-7/8 inch hitch ball you would want the part # 19256.
    view full answer...
  • Recommended Hitch Balls for the Curt Ball Mount part # C45017
    The recommended hitch balls for the Curt Ball Mount part # C45017 are the 2 inch hitch ball part # 19258 and the 1-7/8 inch hitch ball part # 19256 that have shank lengths of 1-9/16 inches.
    view full answer...
  • Hitch Recommendation for a 2014 Toyota Camry Hybrid
    I checked with Curt and they confirmed that the Curt Trailer Hitch Receiver # C12107 as a fit for your 2014 Toyota Camry Hybrid. The pin and clip are included, the recommended ball mount is Curt Class II Drawbar # C45017. If you need hitch balls check out the 1-7/8 inch ball # 19256 and the 2 inch hitch ball # 19258.
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2016 Toyota Camry Hybrid
    For your 2016 Toyota Camry the Curt hitch part # C12107 is a confirmed fit since it also fits the hybrid models. For trailer wiring then the Curt kit part # C55567 would work great and is easy to install. The ball mount you'd need is the part # C45017 and then for a ball # 19256 would be correct for a 1-7/8 inch size.
    view full answer...
  • Will Curt Trailer Hitch C11701 Fit 2005 Mercedes-Benz E-Class with Dual Exhaust
    There will be no issue with the dual exhaust on your 2005 Mercedes E-Class sedan and the Curt Class I Receiver Hitch # C11701. This hitch does require drilling for installation. I have attached installation instructions for you. If you are planning on doing some light-weight towing, the ball mounts recommend for use with the # C11701 hitch are # C45562, # C45017, and # C45561. For trailer wiring, you will want to see your local Mercedes-Benz dealer.
    view full answer...
  • Hitch Recommendation for a 2013 Toyota Camry
    The Curt Hitch part # C12107 that you referenced has been confirmed to fit your 2013 Toyota Camry so I would recommend it for you. For trailer wiring you would want the # 118405, ball mount # C45017, and hitch balls # 19256 and # 19258 depending on what size trailer couple you have.
    view full answer...
  • Trailer Hitch for a 2008 Mercedes E-Series Wagon
    Curt trailer hitch # C11701 is listed as a fit for your 2008 Mercedes E-series wagon. If you plan on doing some towing the correct ball mount is # C45017. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring you will need to visit a local Mercedes dealer since there are no aftermarket harnesses that will fit. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with...
    view full answer...
  • Recommended Hitch for 2012 Buick Regal Turbo That Provides Discrete Appearance on Car
    For a 1-1/4-inch Class II hitch with a concealed cross tube for a more discrete appearance on your 2012 Buick Regal Turbo the best option is the Curt # C12115 that you referenced. The linked installation video show the process on a 2011 model year Buick. I also linked the written instructions and a helpful article with tips for an easier hitch installation. The hitch comes with all required installation hardware and also includes a pin and clip to secure a ball mount for towing or an accessory...
    view full answer...
  • Will CURT Trailer Hitch Receiver # C12115 Fit 2012 Buick LaCrosse
    From the information I was able to obtain, the item you selected, CURT Trailer Hitch, part # C12115, will fit your 2012 Buick Lacrosse. The wiring you referenced, CURT Custom Fit Vehicle Wiring, part # 56098, is the correct wiring kit for your vehicle. For a ball mount use # C45017. To complete your towing setup, you will either need a 1-7/8 inch hitch ball, part # 19256, or 2 inch hitch ball, part # 19258, depending on the size of your trailer coupler. I have linked instructions for...
    view full answer...
  • Trailer Hitch and Wiring for a 2011 Buick LaCrosse CXL
    Curt trailer hitch # C12115 has a capacity of 3,500 pounds gross trailer weight and 350 pounds tongue weight. But I checked the owner's manual online for your 2011 Buick LaCrosse and found that it has a towing capacity of 1,000 pounds so you are limited to that even though the hitch is rated higher. If the gross trailer weight is under 1,000 pounds then you can pull it with your LaCrosse. A 17 foot boat and trailer is likely heavier than that though. The recommended ball mount for this...
    view full answer...
  • Trailer Hitch and Wiring for a 2014 Chevy Malibu LS to Tow a 16 Foot Jon Boat
    Curt trailer hitch # C12115 is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight so a 16 foot jon boat with 30 horse power motor won't be a problem for the hitch. But for the vehicle you will need to look in the owners manual for the towing capacity. It will likely be lower than the hitch rating. Whichever ends up being lower is the capacity you will need to go by. The correct ball mount for this hitch is # C45017. For a 1-7/8 inch ball use # 19256 and for a 2 inch...
    view full answer...
  • 2014 Camry XLE Hybrid Towing Capacity
    I looked up the towing capacity of your 2014 Camry XLE Hybrid online and found it to be 1,115 lbs which would be enough for a small rental trailer. We have just what you'd need to tow a small trailer too. First you need a hitch which for that we have the Curt part # C12107 as a fit that would have plenty of capacity. For trailer wiring you'd then want the part # 118405 which has the most reliable converter box available and is easy to install. Then for a ball mount you'd want the Curt...
    view full answer...
  • Recommended Hitch Ball For Curt Class ll Drawbar For 2015 Subaru Outback Wagon
    The 2 inch Diameter Tow Ready Hitch Ball with Short Shank, part # 19258, would work well with the Curt Class II Drawbar, part # C45017. For a 1-7/8 inch diameter hitch ball I recommend part # 19256. The C45017 will fit hitch receivers with a 1-1/4 inch receiver opening, and measures 6-1/4 inches from the center of the hitch pin hole to the hitch ball hole. This draw bar is Class l or Class ll compatible. If you need a hitch pin and clip I recommend part # F-4. I have attached links...
    view full answer...
  • Recommended Trailer Hitch for 2015 Buick Regal GS
    We carry hitches from two manufacturers, Cequent Performance Products, who manufactures Hidden Hitch and Draw-Tite and Curt Manufacturing. In terms of overall build quality and the quality of the finish, the hitches from both companies are pretty equal. I agree with you about the quality of Curt products. That said, the Curt trailer hitch # C12115 is a confirmed fit for your 2015 Buick Regal GS. Trimming of the fascia is required for the Impala models, but not for the Regal GS. We don't...
    view full answer...
    Image 1 for
  • Best Hitch Recommendation for a 2015 Cadillac XTS
    The Curt Hitch part # C12115 that you referenced has been confirmed to fit your 2015 Cadillac XTS so I would recommend it for you. It has a concealed cross tube so it would be mainly out of plain sight. Check out the install video I attached. For trailer wiring you would want part # C59496, ball mount # C45017, 1-7/8 inch ball # 19256, 2 inch ball # 19258.
    view full answer...
  • Hitch Recommendation for a 2015 Toyota Camry
    A hitch that came off of a 1999 Toyota Camry would not also fit a 2015 Toyota Camry. The vehicles are different enough that a new hitch design would be required. The hitch you will want is the Curt Hitch part # C12107. The correct trailer wiring would be part # C55567. If you also need a ball mount you would want the # C45017 and then for hitch balls # 19256 and # 19258.
    view full answer...
  • Trailer Hitch for 1993 Volvo 240 Sedan
    The hitch you're needing is the Curt Class II, part # C12207, which we do offer. If you were wanting to use the hitch for towing purposes (as opposed to using it as an attachment point for a bike rack or cargo tray) you'll also need a trailer wiring harness like part # 119178KIT, a ball mount like part # C45017 and a trailer ball like # 19256 for a 1-7/8 ball or # 19258 for a 2 inch ball.
    view full answer...
  • Will Ball Mount Included with Curt Class II Hitch # C121073 Place Trailer Ball at Proper Height
    The ball mount recommended with the Curt Class II hitch # C12107, when installed in the rise position will place the base of the trailer ball at approximately 13-5/8 inches above the ground. The ball mount is part # C45017. If 13-5/8 inches wouldn't be high enough to level your trailer, you can measure the height above the ground of the bottom of the coupler when the trailer is level. Take a look at the FAQ article I've linked for you. The article shows exactly how to measure to determine...
    view full answer...
  • Is Ball on Curt # C45571 Euro-Style Ball Removable
    The Curt Euro-Style Class II ball mount you referenced, part # C45571 features a permanently attached 1-7/8 inch trailer ball which is not removable. If you were wanting a ball mount with a similar rise where you could interchange the trailer ball, I'd recommend going with a standard type ball mount, like part # C45017. If you anticipate needing to change between 1-7/8 and 2 inch trailer balls frequently, I'd recommend using a interchangeable ball set-up like what Convert-A-Ball offers....
    view full answer...
  • Trailer Hitch Recommendation for a 2014 Chevy Malibu LTZ
    I checked with Curt, the manufacturer of trailer hitch # C12115 and they list the hitch as a fit for all models of the 2014 Chevy Malibu so that would include the LTZ trim. I have linked the instructions below and a video showing an example installation for you. Other sites don't have human-power to keep up fit information like we do. Or they are caught up on the fact that the available hitches exclude Canadian models and not US models. The recommended ball mount with the hitch is # C45017...
    view full answer...
  • Recommended Trailer Hitch For 2015 Chevrolet Malibu Turbo With Dual Exhaust
    For your 2015 Chevrolet Malibu Turbo I recommend the Curt Trailer Hitch, part # C12115. This hitch is a Class ll hitch and has a 1-1/4 inch receiver opening. I spoke with my contact at Curt and they told me that the dual exhaust should be no issue when installing this hitch, so you should be good to go. I have attached an installation video for this hitch on a 2014 Malibu you can check out. A note from Curt states that all non-trailer loads - bike racks, cargo carriers and so forth -...
    view full answer...
  • Trailer Hitch and Wiring for a 2014 Chevy Impala LT
    For your 2014 Chevy Impala LT I recommend Curt trailer hitch # C12115 with ball mount # C45017. This hitch is rated for a maximum of 350 pounds tongue weight and 3,500 pound gross trailer weight. Check the Impala owner's manual for its capacity and go by the lower of the two. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. Please note the 1-7/8 inch ball is rated for 2,000 pounds gross trailer weight. You also need # F-4 for a pin and clip. For a trailer wiring harness...
    view full answer...
  • Trailer Hitch Receiver Recommendation for 2011 Buick Regal Towing 850 LB Jetski
    I have included a link to all of the hitch options for your 2011 Buick Regal. I personally recommend the Curt, # C12115. This hitch is economical, offers bolt-on installation so no drilling or welding required, and with a capacity of 350 lbs for tongue weight and 3500 lbs for towing, would have sufficient capacity to tow the jetski. In addition to the hitch you may also still need the following: Ball Mount # C45017 Pin and Clip # F-4 Hitch Ball # 19258 for 2 inch or # 19256 for 1-7/8...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.