# 1
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
The shipping was fast to Canada, but the paint was peeling on part of the product.
Very heavy duty. Will use it with a bike rack I had for another vehicle that had a 2" receiver.
# 2
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver with 5" Rise
I bought this adapter so that I could mount a bike rack on the back of my 2012 Honda Civic. The adapter got the bikes high enough so that they wouldn't hit the pavement when backing out of my driveway and transitioning to the street. The product is definitely strong and well made. It was put to the test with a very heavy steel thule bike rack that was definitely heavier than all 4 of the bikes that were mounted on it. The fit was precise so it didn't hit my rear bumper as well.
# 3
Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long
The Curt C45785 1.25 inch to 2 inch hitch adapter seems well-constructed, but does NOT fit the current SPA Volvo OEM 1.25 inch automatic retractable hitch receptacle (mine is on a 2020 V60 Cross country). The lock pin hole doesn't go back far enough to accommodate the pin -- see photo.
Great product from an even greater company. ETRAILER has the knowledge and products to solve most any trailering problem.
# 4
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
Perfect fit BUT the inner tube broke away from the outer tube after about a dozen trips. One small weld on the outside corner is all that holds it on. The small amount of play must have been too much for it. I was even using an anti-rattle lock pin. Very disappointing due to the price point. And now it’s unsafe to use as it could slip right out of the receiver.
# 5
CR Brophy Hitch Extender for 1-1/4" Hitch Receivers - 5-3/4" Long
The opening on the extender is slightly smaller than my bike rack. To get it to fit properly I have to pound it on with a rubber mallet. I will try to file it down a little.
Here in Saskatoon, Canada, I am very pleased to endorse J&J's flagpole holder and hitch mount extension products. Solid construction and beautifully finished engineered pieces. Fitted easily onto my '92 Camaro RS, for Shriner parades. Supporting a worthy philanthropic effort for children.
# 6
Roadmaster Dual Hitch Receiver Adapter, 2" or 4" Drop/Rise
Exactly what I needed. Now able to add storage box and still pull tow Dolly.
Etrailer’s customer is actually customer service. There’s real people who are there to help. Kate helped me get my order the next day after I realized I accidentally switched the billing and shipping addresses on the order form.
# 7
Roadmaster Dual Hitch Receiver Adapter, 2 " or 8" Drop/Rise
Perfect for my application.
Works great! I use it on my motorhome to carry my bikes with a Rocky Mounts Carrier and flat tow my car with my Blue Ox system. It places the bike carrier at an optimal height over the front of the car but my may be different for other bike carriers. Very sturdy and seems to be quality all around.
# 8
Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
We were looking for a solution to haul our utv when pulling our camper. This extender allowed us to leave the tailgate down and still have enough clearance to not damage the tailgate. Downside--this extender amplifies the amount of movement with the hitch. This is more than a simple hitch clamp could fix. I added several modifications to completely eliminate the hitch movement. We have taken several trips since the installation and no issues with pulling the trailer. We did have to extend the safety chains about 4 links. Overall a good product and it accomplished the goal. As always,etrailer personnel are knowledgeable, easy to deal with and have quick shipments.
My truck has a 2-1/2" receiver. I already owned a heavy duty 2" hitch. This 2" reducer & extender was perfect for my use. I used it to tow a rental trailer and needed to extend my receiver to allow me to tow with the tailgate down. This reducer/extender did the trick. I had plenty of room making tight u-turns. The quality of the product is very good. I would recommend this product to others.
# 9
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
Fantastic Product. Saved me from having to buy a brand new bike holder for my new car with a different hitch size.
Professional, delivered a day early. As promised. What more can you want.
# 10
Curt Hitch Extender for 2" Trailer Hitches - 14" Long
The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.
This extender does a pretty good job of keeping my bike away from the rear radar system in my Venza so the backup warning system does not engage in error. Beware it’s pretty heavy.
# 11
Hitch Extender For 2" Trailer Hitch Receiver 14" Long
It works great,by moving the trailer back from the vehicle you can load longer items,so there are not hanging over the back of the trailer. It also helps in the backing of the trailer. Thank You
I would like to have the actual distance from the weld joint to the hitch pin hole of 4 1/2". This unit is slightly less than that.
# 12
Malone 2" Dual Purpose Hitch Receiver
Used the Malone 2" Dual Purpose Hitch Receiver to have a bike rack with two bikes on the upper Receiver and a 21' bassboat on the lower Receiver. Ran down to Florida Everglades, Florida Keys and back home. Almost exactly 4,000 miles. Hitch worked perfectly. I did find that you can not "jacknife" the boat as much or the bow of the boat will touch the bikes on the rack but that is to be expected. Hitch was quiet, strong and exceeded my expectations. Easy to install and looking forward to using it again in a month for another 4,000 mile road trip. Note: I drive fast and the roads are not always perfect. This is a sturdy Hitch Receiver. Hope this review helps you. Sorry, crummy photo as the Receiver is a "set it and forget it" product. Be well.
I bought this Dual Purpose Receiver at Twice the price of that Big online company because of reviews from owners that bought on both sites. After evaluating the reviews, I chose to go with etrailer because I have come to trust them as a company that gives you a great product that they will stand behind and they appreciate your business. I haven’t used this receiver yet, but can look at it and I am comfortable that I made the right choice. I will follow up with another review after I use it.
# 13
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
Installed my 2” hitch but don’t have a 2” bike trailer yet. I purchased this to continue to use my 1.25” bike trailer (until I find a deal). Used this over Thanksgiving weekend on I35 in Texas (tons of traffic)and I’m very pleased with the performance. I’m was secure and bikes traveled just fine.
I ordered this adapter from e-Trailer so I could extend my bike rack past my spare tire on my 2005 Honda CRV. This solved my problem and this thing is well made to take the weight. I'm glad I purchased from e-trailer because I know now that they sell quality products as I have also purchased a new receiver, ball mount and 2' ball to pull my trailer. If your goal is quality, great service and fast shipping then e-Trailer is one company to go with.
# 14
Hitch Extender For 2" Trailer Hitch Receiver 7"
I needed my bike to clear my bumper on a front hitch and this did the trick. This extender is hollow so I was able to use anti rattle/ lock before adding bike rack.
Allows me to use my back rack and small boat trailer without having to remove the spare tire on my Jeep Wrangler. Works well.
# 15
Trailer Hitch Adapter - 1-1/4" to 2" Hitch - 4-1/2" Drop/5" Rise - 6-1/2" L
Perfect and simple item. It was easy to install. I purchased an accessory with receiver opening of 2” and my jeep had 1 1/4 receiver.
I love it! It’s allowed me to use a 2 inch bike rack on the back of my sedan in a safe manner.
# 16
Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop
Beefy. I have no doubts of the capacity of either side of this hitch adapter, there's plenty of weld to hold it all together. Very few options will provide minimal drop (for an off-road trailer) and minimal rise on the other side for an additional bike rack or cargo carrier. Jeeps are tough since you need to be able to open the gate. This one clears no problem. My spare is up on a slant back carrier, but I think the stock spare should clear as well. Get you a "Trimax THC200 Universal Anti-Rattle Clamp Fits 2" Hitch" and this thing is solid as stone.
The hitch has held up over Alaskan roads towing a jeep, but it does not sit level in the receiver so the tiny little bit that it sags is exaggerated when the tow bar is connected. Paint starting to peel with wear after a year.
# 17
Roadmaster Dual Hitch Receiver Adapter with 2" or 6" Drop/Rise
Worked out great for my family bike adventure. Traveled with that setup over 1000 miles and it was easy drive. I had cargo carrier on the bottom and bike rack on top, and with that setup and 4 people on board still plenty of ground clearance 11". Dual hitch is a solid piece of steel that can carry a lot of lbs. Just don't overload max. tong weight, need some room for safety!
This adapter design was exactly what I was looking for. I often carry 4 or more bikes with my Sylvan GO. The pictures show how I configured my setup. Its perfect!!! And yes, I have to be a little careful on really tight turns but its never been an issue. Thank you George and the etrailer team.
# 18
Trailer Hitch Receiver Adapter 1-1/4" to 2" Hitch - 6-1/2" Long
I put a 1.25" trailer hitch on a Ford Fusion Hybrid so I could mount one of my cargo baskets that require a 2" hitch on it. It worked fine to allow for this.
Working fine for me. It sticks out from behind car, but I like it this way as to reach it.
# 19
Roadmaster Dual Hitch Receiver Adapter, 2" or 10" Drop/Rise
Great product
I love the product not just for the obvious reasons such as it’s extremely durable and well made for safety but specifically for length of the arm. The arm length is just long enough to clear my hitch rack walls, which allowed me to plug in my bike rack. I would certainly recommend this product to others. I haven’t seen any marketing for this specific use case so have at it.
# 20
Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long
I had to remove burrs from the inside of the tube, both at the holes drilled (for hitch pin) and the end where the ball hitch goes in. The welded boss on the end of the tube had burs left over from the cutoff operation. The ball hitch would only slide in a couple of inches prior to deburring it. Also the packaging was not very good, see pictures. No damage to the product but I am surprised it even stayed in the box during the trip here, it was completely loose in the box and tore it apart during transport.
The product is good the packaging for shipping needs improvement. The box came ripped in half and only the tape on the bottom of the box was holding the box together. The plastic cap for the one end was broken and unusable. The other end had a dent in the metal that had to be filled down to be able to insert it into the receiver. The bracket for the plug extension to mount into the hitch extension was bent together so it had to be bent back straight. This was to be able to insert the plug and line up the 4 holes to be able to mount the receiver plug to the extension.
What our customers are saying:
"Fast Shipping They are AOK Thanks"