Best 2021 Toyota Tundra Trailer Hitch Ball Mounts

Easy ordering process, product arrived on time and in good condition

This is one of the items that has saved me a LOT of time. Since I use both my truck and my car (both have Curt hitches ordered from etrailer) for towing my half dozen or so different types of trailers, I am constantly needing to adjust the ball size and/or height depending on the combination of vehicle and trailer. With this kit is takes literally less that 30 seconds every time for me to configure to exactly my needs. Also, the bag is excellent for keeping crud and ball grease off my vehicle interiors and is big enough to hold a ball wrench inside as well. Cannot beat the price either for so much convenience and saved time.

Very sturdy ball mount. Very easy to install.

Fit and finish are great and is obviously a very well made ball mount.

As advertized; the shipment arrived in very good shape due to heavy-duty packaging. Quality and strength was as expected; this Curt adjustable ball mount is sufficient to tow anything my Tundra is rated for. The requested Prodigy P2 control will fit in place of the Tundra ash tray.

Fits our VW Touareg perfectly and allows us to tow a variety of things now. As can be seen in the pictures the hitch has a +5-inch gap between the bumper and the vertical adjustment pillar and the trailer itself is out further so there's enough room to get to the rear hatch and maneuver the vehicle/trailer.

Solid construction at the best price for this tow capacity.

should at leat include the pin to secure it to the hitch

Very nice unit. I have a 7000# gross weight trailer and couldn't legally use it to max capacity because most 2" balls are only rated at 6000#. The 2" ball on this is rated for 7500#. Additionally, with the adjustable drop, rise and three ball sized to choose from, this is the only hitch you will need.

So far so good, easy install out of the box in "hidden mode", no assembly required.

Very nice hitch, and etrailer is a great company to purchase from.

great quality order here before and will in the future shipping super fast and always a great product

2007 Toyota Tundra 5.7L, 7X14 Parker flatbed tandem axle utility trailer 7700 lb capacity. I've only used it once since purchasing it, but compared to my previous non-cushioned ball mount it does an excellent job cushioning the load and keeps the trailer from banging the mount in the box and shaking the truck upon braking and acceleration. Very nice when hauling 2+ tons of cargo. Fast shipping from etrailer too.

Have used this product before on another truck, worth the extra cost. Gets rid of the jerk/bump at stops and acceleration.

USA built, super solid construction, easily adjustable. This is the best hitch on the market in my opinion and well worth the cost. For reference, I tow with a 2014 Tundra that is lifted. The back end is 1" higher than stock and with the 5" drop/5.5" rise I've got plenty of adjustability.

The hitch and ball mount are excellent quality. My concerns are twofold. The hitch is so heavy that I had to take it to my mechanic to have it installed. Minor cost and inconvenience, but the hitch for my previous F-150 was just as sturdy, but easy to install myself (albeit with higher ground clearance). My concern about the ball mount is that the factory told me erroneously that it could not be reversed for a drop, so I returned it. This order is for the replacement after I was finally correctly told it could be reversed and how to do that. Ball mount would have been a 3 for that reason, and overall hitch and ball mount quality a 5. So I averaged them.

I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.

Attaching the trailer was easy and provided me a higher comfort level when backing up to center the ball under the hitch because I had more room between the coupling and my Tundra. Additionally this product provided me the ability to open my Tundra bed door while my trailer is attached. Lastly it provides me a greater turning radius when backing up. I would recommend this product.

Secure pin hole should be reamed after drilling. Fillet weld at top of receiver plate, shallow, operator of torch on wire feed needs to correct angle of torch and speed of fill metal application.

This is really nice. Beveled edges so it slips into receiver hitch so sweet. Beautiful welds heavy weight mount for my weigh safe ball. I bought a 10,000 lbs hitch and I wanted a draw bar with the same type rating. Now the only thing limiting my trailer capacity is my truck's ability to tow, not the hitch, bar or ball.

I like the look of this set very much and it is easy to mount and adjust the ball mount. The workmanship and finish are beautiful. Customer service was excellent in assuring I found the correct mount for my Ford Escape. I pull my 6'x10' utility trailer or very seldom my pontoon trailer. I like that the adjustable mount comes off very easily as I remove it until I need it while my vehicle is in the garage--it helps prevent knocking your leg against it in the garage. However, I am not having any luck loosening the bolt that secures the 2 chrome balls to the adjustable ball mount; I have the correct Allen wrench but cannot exert sufficient torque to loosen the bolt while the adjustable ball holder is off the ball mount. I want to put a different ball combination on so I can pull my son's trailer, which has a smaller ball than comes with the set, if I have to. I also added the anti-rattle device and it stops the mount completely.

This still looks good with no slop easy to switch between the different ball.

This is a great all-purpose hitch. I've used it to mount a heavy-duty bike rack and a steel T-rack to carry a canoe as well as lumber. Most recently I hauled 5 x 8 cargo trailers full of plants, then furniture for a 600-mile move. It was simple to use, problem free, very strong and sturdy. Now that I live on some acreage, I see a trailer in my future, so this will get a lot more use. I drive a 2013 Tacoma, so this is a good size hitch at a good price with sufficient capacity for my needs. I do use a key lock for the hitch as well.

I actually got my hitch the date they said it would be here to my surprise. When the box arrived it was pretty much beat up, not the hitch just the box. I wished there was instructions how to install it. Overall very satisfied and will buy from 5hem again

Product and pricing excellence is what etrailer is all about. They bakc it all up with great customer support. thanks etrailer.

To be honest, I use it upside down. I needed a hitch with rise, but none were available at time of purchase, and yours, inverted, works perfectly! The welds are regularly checked and remain all secure. It's a good hitch.

Easy to use. Stows away to avoid bumping knees. Would have given 5 stars but it’s expensive. I would still recommend.

I purchased the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black and am extremely happy with it. It was $100 cheaper than anywhere else I shopped. Was delivered quickly and was an easy install. I used it to haul a trailer full of wood that I cut up and it got the job done! It is very heavy duty and takes the place of multiple single hitches. It’s nice to have all the options in one.

Great workmanship/quality and made in the USA.

Everything, when I need something for my truck I always turn to etrailer. They make it so easy to get the product you are looking for. The quality of their product and the Customer service are the BEST! Thank you.

Great solid forged Ball mount!

Product is awesome. Shipping container was destroyed when it arrived. Product was not hurt.

Good product

Good service and the package arrived intact, they always kept me informed. Thank you, Andow

Works great for our various race boats with all different trailers

Disappointing. Although the manufacturing quality is consistent with Curt's normally high standards, the design leaves everything to be desired. There is not enough clearance above the trailer tongue coupler latch to mount a bike rack. Even if you somehow manage to overcome this, most bike racks won't clear a telescoping jack stand. I should have sent this one back!

Good quality product. As described. Smooth delivery