Truck Bed Bike Racks Specs:
Features:
Carry 2 bikes with this custom fit half pad. It holds your bikes over the tailgate, so you won't have to throw your bikes haphazardly in your truck bed. It also frees up your hitch so you can tow and carry bikes at the same time.
More Information >Truck Bed Bike Racks Specs:
Features:
This custom fit half tailgate pad is a perfect solution for transporting bikes for you and your partner. It carries your bikes upright over your tailgate, while leaving your hitch free to tow a camper. Thick foam cushions all points of contact.
Installation Notes:
No drilling required for installation
More Information >Truck Bed Bike Racks Specs:
Features:
This tailgate pad and bike rack lets you transport up to 7 bikes in your compact truck bed. Soft rubber pads with anchor straps keep bikes separated and secure on the rack. Large panel provides backup camera visibility and tailgate handle access.
Installation Notes:
No drilling required for installation
More Information >Truck Bed Bike Racks Specs:
Features:
This padded rack lets you carry 4 bikes on your truck bed tailgate. It's a great alternative to fork blocks, it doesn't require drilling into your truck bed, and you don't have to remove your bikes' front wheels.
Installation Notes:
No drilling required for installation
More Information >Truck Bed Bike Racks Specs:
Features:
This heavy-duty, padded vinyl cover provides an easy, inexpensive way to carry up to 6 bikes over the tailgate of your pickup truck. Included wraps let you tether bikes together on a daisy chain, and a built-in flap allows access to tailgate handle.
Installation Notes:
No drilling required for installation
More Information >Truck Bed Bike Racks Specs:
Features:
This padded rack lets you carry 5 bikes on your truck bed tailgate. It's a great alternative to fork blocks, it doesn't require drilling into your truck bed, and you don't have to remove your bikes' front wheels.
Installation Notes:
No drilling required for installation
More Information >Truck Bed Bike Racks Specs:
Features:
This custom fit tailgate pad is a perfect solution for transporting bikes for the whole crew. It carries more bikes than your regular Kuat bike rack, while leaving your hitch free to tow a camper. Thick foam cushions all points of contact.
Installation Notes:
No drilling required for installation
Tech Tip:
It is recommended that trucks with a flareside bed use part KU69ZR.
More Information >Truck Bed Bike Racks Specs:
Features:
Ditch the fork block and keep your front wheel on - transport your bike in your truck bed with this wheel-mount bike rack. Ratcheting arm holds bike by the front wheel. Rack drops into tailgate opening and secures when tailgate closes.
Installation Notes:
No drilling required for installation
More Information >Truck Bed Bike Racks Specs:
Features:
Tailgate pad converts your tailgate into an easy-to-use 5-bike rack. Integrated bike cradles and closure straps keep your bikes stable and secure. Tuck-away flap provides access to tailgate or rearview camera. Attaches to tailgate with straps.
Installation Notes:
No drilling required for installation
More Information >Truck Bed Bike Racks Specs:
Features:
This custom fit tailgate pad is a perfect solution for transporting bikes for the whole crew. It carries more bikes than your regular Kuat bike rack, while leaving your hitch free to tow a camper. Thick foam cushions all points of contact.
Installation Notes:
No drilling required for installation
Tech Tip:
Because of the shorter width of the tailgate, this product is recommended for trucks with flareside beds.
More Information >Videos
for Truck Bed Bike Racks
Help Articles
for Truck Bed Bike Racks
Expert Answers
for Truck Bed Bike Racks
It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…
view full answer...Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…
view full answer...The best way to determine the weight capacity of your leaf springs would be to check the weight rating of the axle on your trailer. The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should…
view full answer...Yes that is correct, Eugene. Since the canister sits flush with the bed rails, you'd effectively have…
view full answer...For replacement Dexter manual adjust brake assemblies to replace your 36-19 you would want the part #23-27 for the right hand side and part #23-26 for the left hand side. These are manual adjust 10 by 2-1/4 inch Dexter brake assemblies that would…
view full answer...I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate…
view full answer...Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...I would be happy to help! Since your 2018 Keystone Cougar 311 RES 5th wheel with tandem 5200lb Dexter axles has the Dexter 072-097-00 leaf springs currently installed the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles -…
view full answer...Yes, the Half Tailgate Pad Bike Rack part #BDW79QB that you referenced does work with your two electric fat bikes.
view full answer...For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then…
view full answer...The 1-Bike Add-On for Thule Bed Rider Pro Truck Bed Bike Rack #TH98YC is meant to fit onto the square bars of the Thule Bed Rider Pro #TH38YC which uses a 30x20mm…
view full answer...Filter Products (20)
Contact and Help
What our customers are saying:
Product arrived very quickly. Everything was there and fit properly. I'm very satisfied.
Greg
Hillsborough, NC