1995 Ford Ranger Vehicle Tow Bar Brake System

Features:

Think of it as a one-time project that pays off on every trip. Once the Shadow 2 braking system is installed under the hood, you hook up, check your monitor, and drive away with the peace of mind that your towed vehicle is stopping safely behind you.

Installation Notes:

The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.

Features:

Imagine prepping for your trip and having your braking system ready in less than a minute. With the RVibrake 4, the audio assistant guides you step by step, so there's no fumbling or guesswork, just a quick and reliable setup every time.

Installation Notes:

The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.

Features:

Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.

Installation Notes:

The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.

Features:

Get safe, smooth braking for your towed car with this truly proportional braking system. Car slows perfectly in sync with your RV. Installs permanently so you can just plug in and go. Low-profile design keeps it out of sight and out of the way.

Installation Notes:

The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.

Features:

This portable unit gets you smooth braking without a complex installation. Senses the RV braking and applies the car's brakes at an intensity preset by you. Easy to swap between multiple cars; settings adjust for smooth braking for any size car.

Installation Notes:

The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.

Features:

Get fully proportional braking with a system that never has to be removed, replaced, or reset. Actuator installs out of sight and remains virtually invisible when your car isn't being towed. Controller also works as a trailer brake controller.

Installation Notes:

The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.

Features:

Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components designed to stay out of sight.

Installation Notes:

The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.

Features:

Stay on budget with this proportional braking system. More reliable than a portable system, cheaper than a permanent one. Lightweight actuator attaches to brake pedal and front seat and removes for storage. Car brakes perfectly in sync with RV.

Installation Notes:

The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.

The BrakeMaster seat adapter listed is a requirement for using this supplemental braking system.

Features:

Portable unit gets you smooth braking without a complex installation. Measures the RV's braking and applies your towed car's brakes with the same intensity, at the same time. Easy to swap between multiple cars. Includes LCD braking monitor.

Installation Notes:

Brake light relay RM-88400 is included with the EvenBrake system.

Features:

Get safe, smooth braking for your towed car with this truly proportional braking system. Installs permanently so you can just plug and go. Low-profile design keeps it out of sight and out of the way. Includes convenient wireless braking monitor.

Features:

Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components stay out of sight. Includes convenient wireless Coachlink.

Features:

More reliable than a standard portable system, lightweight actuator attaches to brake pedal and driver's seat and removes for storage. Car brakes perfectly in sync with motorhome.

Installation Notes:

The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.

The BrakeMaster seat adapter listed is a requirement for using this supplemental braking system.

Features:

This portable unit gets you smooth braking without a complex installation. Senses the RV braking and applies the brakes proportionally. Easy to swap between multiple towed cars: settings adjust for safe, even braking for any size car.

Installation Notes:

The RM-88400 relay is required to prevent the towed vehicle's brake signal from overriding the turn signal from the RV when applying the brakes during a turn. It is not required when using magnetic tow lights.