Hands-On with the Lippert Center Point by Trailair Air-Ride Suspension Upgrade Video

I spoke with my contact at Lippert and he informed me that the Center Point part #LC1565391 will support a 21,000 lb trailer. That being said, since you have a triple axle trailer you would want the part #LC1565401 instead. Bag failure is extremely…

You can install 2 of the Lippert Bolt-On Shock Kits #LC281281 with the Lippert Center Point #LC1565391. This shock kit is designed to install on 3" diameter axles which should be what your 2018 Forest River Cherokee 274VFK has. The combination…

To install the Lippert Center Point #LC1565391 on your 2017 Jayco Pinnacle 36FBTS you are going to have to remove the MORryde X-Factor Crossmember #MR99ZR. This brace is used to reduce stress on the frame and hangers when making tight turns.

The Dexter Heavy Duty Suspension Kit #K71-360-00 is designed for 33 inch axle spacing. To add your third axle, you cannot simply add a hanger spring and axle. You can keep your 35 inch spacing but you will need to relocate your hangers. I've…

If you need an axle replacement because one is damaged, you will be fine sticking with the 7,000 lb axles you currently have. All you would need to do is get the hub face to hub face measurement to choose the right axle length. We have 94"…

The correct replacement air bags for your Lippert Center Point by Trailair Air-Ride Suspension Upgrade #LC1565391 are the Replacement Air Bag #LC1564251. We also have the Replacement Air Bag Unit #LC293054 and the Replacement Hardware Kit for Lippert…

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

Thanks for reaching out again, Scott! I recommend using the Lippert Bolt-On Shock Kit #LC281281 over the Roadmaster Comfort Ride #RM-2460 for your application. Both will install with the axle located below the leaf spring stack and the Lippert shock…

The Lippert Center Point Air Suspension Upgrade you referenced, part #LC1565391 is compatible with tandem axles up to an 8K capacity, according to Lippert, so the system will work great with your 8K Lippert axles. I've linked to a video where one…

The side of the shackles with two holes needs to be mounted on the bottom of the Lippert Center Point item #LC1565391. The side with the single hole connects to your leaf springs. I have linked an installation video below along with a couple of…

It would appear that you can move the Lippert Center Point #LC1565391 down one additional hole which will likely only gain you an additional 1/2" of clearance when it is moved. When the Center Point is originally installed it will raise the…

Thanks for the picture and all of the information! Those dimensions do not match up to a leaf spring we currently have but I do have a close option which I think will work. When leaf springs are measured for replacement we ask people to jack the…