1995 Ford Ranger Nerf Bars - Running Boards

Hey Eric. You're looking for the Dexter 9-28-5 Brake Drum. This is the one designed for ABS brakes. We do not carry it.

Hi Scott, We do have a couple options for running boards that fit your 2025 Dodge Durango R/T Anniversary Plus, from Romik. These are from Romik, and you have a couple of styles to choose from: - Romik RB2 Running Boards w/ Custom Install Kit…

Hi Shawn; I reached out to Romik and found that their available running boards fit the R/T models. This means you can install the Romik REC-B Running Boards #RMK53FR you were looking at on your 2023 Dodge Durango R/T.

Hey Robert, the correct Westin Sure Grip running boards for your 2019 Ram 1500 Classic are the part #27-6105-1895 which also comes with the correct mounting hardware. This is for a regular cab truck, is that what you have?

Hey Rocha! The best running boards for your 2023 Ford Explorer are going to be the Westin R5 Nerf Bars item #W68NR in Black or item #W48NR in Stainless. These 5" custom fit running boards come with included hardware that does not require…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hello Don, It comes with great sadness to tell you that there is not adapters that will work for you to use the Curt Helux #C73RJ with a different pin box number. At this time they are only making it for the Rhino. Let's not give up hope though,…

Hey Rob, the Torklift camper tie downs part #TL87DR that you referenced are the correct tie downs for your 2024 Ford F-250 long bed with a factory hitch and will work with any of the steps we sell. The only ones it doesn't work with is the…

Hey Clayton, you could use the Replacement Base Assembly part #DM6201 which would attach to the OEM gooseneck hitch ball but there isn't a version of this hitch that has a base that matches up to a Ford puck system. Do you have the Ford gooseneck…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hey Don, thanks for reaching out! The replacement sensor for your TST TPMS for Trailers and Cars #TST35FR (TST-507-RV-8-C) is the part #TST-507-R on our site. What happened to the old sensor?