2024 Chevrolet Equinox Brake Controller

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.

Installation Notes:

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.

Installation Notes:

You need item ETBC7L ($109.84) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.

Installation Notes:

You need item ETBC7 ($135.66) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

An additional stop light switch, RM-751439, may be necessary for installation as this vehicle's stop light switch does not have a cold side to tap into. (sold separately).

Features:

This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.

Installation Notes:

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Features:

This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.

Installation Notes:

You need item ETBC7L ($109.84) to install your controller.

Features:

The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.

Installation Notes:

You need item ETBC7 ($135.66) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

An additional stop light switch, RM-751439, may be necessary for installation as this vehicle's stop light switch does not have a cold side to tap into. (sold separately).

Features:

This proportional brake controller is designed to keep towing simple. Includes an LED braking indicator, a slide-bar manual override, and a knob to adjust braking power. Mounts easily within a 90-degree vertical range.

Installation Notes:

You need item ETBC7 ($135.66) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

An additional stop light switch, RM-751439, may be necessary for installation as this vehicle's stop light switch does not have a cold side to tap into. (sold separately).

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.

Installation Notes:

You need item ETBC7 ($135.66) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

An additional stop light switch, RM-751439, may be necessary for installation as this vehicle's stop light switch does not have a cold side to tap into. (sold separately).

Features:

This proportional brake controller automatically syncs to your vehicle's computer network for smooth, precise braking. Low-speed brake adjustment gives you 2 settings for different speeds. Plug-and-play controller mounts in any direction.

Installation Notes:

You need item ETBC7 ($135.66) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

An additional stop light switch, RM-751439, may be necessary for installation as this vehicle's stop light switch does not have a cold side to tap into. (sold separately).

Features:

Get the best towing experience with this kit. 2-5/16" Hitch ball absorbs shock. Wireless brake controller applies your trailer's brakes proportionately. Friction sway control helps keep your trailer in line. And hitch pin limits rattle.

Installation Notes:

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Product intended for 2-inch hitch and trailers less than 7,500 lbs GTW/750 lbs TW.

Features:

Get the best towing experience with this kit. 2-5/16" Hitch ball absorbs shock. Wireless brake controller applies your trailer's brakes proportionately. Friction sway control helps keep your trailer in line. And hitch pin limits rattle.

Installation Notes:

You need item ETBC7L ($109.84) to install your controller.

Product intended for 2-inch hitch and trailers less than 7,500 lbs GTW/750 lbs TW.

You may also need a 4-Flat connector to complete your wiring.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

You need item ETBC7 ($135.66) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

An additional stop light switch, RM-751439, may be necessary for installation as this vehicle's stop light switch does not have a cold side to tap into. (sold separately).

Features:

Simple and rugged, this time-delay brake controller is able to install in any direction, even upside down. Includes a large digital display with a dark smoke lens that can be read even in direct sunlight. Activates brakes with a preset intensity.

Installation Notes:

You need item ETBC7 ($135.66) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

An additional stop light switch, RM-751439, may be necessary for installation as this vehicle's stop light switch does not have a cold side to tap into. (sold separately).

Features:

This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.

Installation Notes:

You need item ETBC7 ($135.66) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

Mount the control knob of this proportional brake controller on your dash for a from-the-factory look, and install the main unit out of sight behind the dash in any position or angle. Adhesive backing gives you the option of a drill-free install.

Installation Notes:

You need item ETBC7 ($135.66) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

An additional stop light switch, RM-751439, may be necessary for installation as this vehicle's stop light switch does not have a cold side to tap into. (sold separately).

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. Plus, it's plug-and-play, so no splicing and no permanent alteration to your vehicle.

Installation Notes:

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Features:

This brake controller likes to keep things simple, with a thumbwheel on the front to adjust the output settings and a lever on the side for the sensitivity. The digital display is large and simple so you can read it with just a glance.

Installation Notes:

You need item ETBC7 ($135.66) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

An additional stop light switch, RM-751439, may be necessary for installation as this vehicle's stop light switch does not have a cold side to tap into. (sold separately).

Features:

Adjust power output and braking aggressiveness with easily accessible, up-front buttons on this time-delayed brake controller. Digital display and rotary-style manual override included. Activates brakes with a preset intensity.

Installation Notes:

You need item ETBC7 ($135.66) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

An additional stop light switch, RM-751439, may be necessary for installation as this vehicle's stop light switch does not have a cold side to tap into. (sold separately).