2023 Ford Ranger Brake Controller

Features:

This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Tech Tip:

Vehicle may not have a brake controller port or plug. There should be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal, which can be wired to the brake controller wires. Additional wire may be needed.

Features:

This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

Tech Tip:

Vehicle may not have a brake controller port or plug. There should be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal, which can be wired to the brake controller wires. Additional wire may be needed.

Features:

This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.

Installation Notes:

Tech Tip:

Vehicle may not have a brake controller port or plug. There should be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal, which can be wired to the brake controller wires. Additional wire may be needed.

Features:

The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.

Installation Notes:

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.

Installation Notes:

You need item ETBC7L ($95.07) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring.

Installation Notes:

Features:

This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.

Installation Notes:

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.

Installation Notes:

You need item ETBC7L ($95.07) to install your controller.

Features:

Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.

Installation Notes:

Features:

This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.

Installation Notes:

You need item ETBC7L ($95.07) to install your controller.

Features:

This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.

Installation Notes:

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. Plus, it's plug-and-play, so no splicing and no permanent alteration to your vehicle.

Installation Notes:

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.

Installation Notes:

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

Simple and rugged, this time-delay brake controller is able to install in any direction, even upside down. Includes a large digital display with a dark smoke lens that can be read even in direct sunlight. Activates brakes with a preset intensity.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

Simple and rugged, this time-delay brake controller is able to install in any direction, even upside down. Includes a large digital display with a dark smoke lens that can be read even in direct sunlight. Activates brakes with a preset intensity.

Installation Notes:

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

Adjust power output and braking aggressiveness with easily accessible, up-front buttons on this time-delayed brake controller. Digital display and rotary-style manual override included. Activates brakes with a preset intensity.

Installation Notes:

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

Adjust power output and braking aggressiveness with easily accessible, up-front buttons on this time-delayed brake controller. Digital display and rotary-style manual override included. Activates brakes with a preset intensity.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

This proportional brake controller is designed to keep towing simple. Includes an LED braking indicator, a slide-bar manual override, and a knob to adjust braking power. Mounts easily within a 90-degree vertical range.

Installation Notes:

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.

Features:

This proportional brake controller is designed to keep towing simple. Includes an LED braking indicator, a slide-bar manual override, and a knob to adjust braking power. Mounts easily within a 90-degree vertical range.

Installation Notes:

You need item ETBC7 ($124.38) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

The 4 trailer brake controller wires are sticking out of the large wire harness that goes through the driver's side firewall, left of the brake pedal, with shrink tubing on the ends.