Expert Review Video:
Trailer Brake Controller Specs:
Features:
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight behind the dash with the included wiring harness. Control your braking power with the turn of a dial.
Installation Notes:
You need item ETBC7 ($129.26) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: 90195-22292
Trailer Brake Controller Specs:
Features:
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
Tech Tip:
Connector is located under driver's side kick panel.
More Information >Code: 90195-22292
Trailer Brake Controller Specs:
Features:
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
Tech Tip:
Connector is located under driver's side kick panel.
More Information >Trailer Brake Controller Specs:
Features:
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.
Installation Notes:
You need item ETBC7 ($129.26) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
Bluetooth-enabled brake controller lets you monitor and control your towing directly from your phone. Create multiple trailer profiles and tweak your settings in the app. One step, plug-and-play installation into your 7-way.
Installation Notes:
You need item ETBC7L ($121.60) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
More Information >Trailer Brake Controller Specs:
Features:
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.
Installation Notes:
You need item ETBC7 ($129.26) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: 90885-22292
Trailer Brake Controller Specs:
Features:
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
Tech Tip:
Connector is located under driver's side kick panel.
More Information >Code: 90885-22292
Trailer Brake Controller Specs:
Features:
This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
Tech Tip:
Connector is located under driver's side kick panel.
More Information >Code: C51170-C51515
Trailer Brake Controller Specs:
Features:
Mount the control knob of this proportional brake controller on your dash for a from-the-factory look, and install the main unit out of sight behind the dash in any position or angle. Adhesive backing gives you the option of a drill-free install.
Installation Notes:
You need item ETBC7 ($129.26) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: C51170-C51436
Trailer Brake Controller Specs:
Features:
Mount the control knob of this proportional brake controller on your dash for a from-the-factory look, and install the main unit out of sight behind the dash in any position or angle. Adhesive backing gives you the option of a drill-free install.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
Tech Tip:
Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.
More Information >Code: C24VV-C51436
Trailer Brake Controller Specs:
Features:
Simple and compact, this proportional brake controller has an intuitive design that's easy to use. Includes a simple digital display, 10 gain settings, a pinch-trigger manual override, and built-in safety features.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
Tech Tip:
Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.
More Information >Trailer Brake Controller Specs:
Features:
Proportional brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a key fob for remote control of the brake controller. Nothing installs in your vehicle, so you can tow with any truck.
Installation Notes:
You need item ETBC7L ($121.60) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
More Information >Trailer Brake Controller Specs:
Features:
Proportional brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a key fob for remote control of the brake controller. Nothing installs in your vehicle, so you can tow with any truck.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
More Information >Trailer Brake Controller Specs:
Features:
Wireless brake controller mounts on your trailer to keep your cab clutter-free. Keep towing simple and convenient with a handheld, Bluetooth remote control. Nothing installs in your vehicle, so you can tow with any truck that has a 7-way.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
More Information >Trailer Brake Controller Specs:
Features:
Bluetooth-enabled brake controller lets you monitor and control your towing directly from your phone. Create multiple trailer profiles and tweak your settings in the app. The main unit plugs in line with your 7-way trailer connector.
Installation Notes:
You need item ETBC7 ($129.26) to install your controller.
More Information >Code: TK90160-22292
Trailer Brake Controller Specs:
Features:
This proportional brake controller has simple controls and a digital display for diagnostic information. Includes 3 boost levels, a slide-bar manual override, built-in battery protection, automatic leveling, and continuous diagnostics.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
Tech Tip:
Connector is located under driver's side kick panel.
More Information >Code: TK90160-22292
Trailer Brake Controller Specs:
Features:
This proportional brake controller has simple controls and a digital display for diagnostic information. Includes 3 boost levels, a slide-bar manual override, built-in battery protection, automatic leveling, and continuous diagnostics.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
Tech Tip:
Connector is located under driver's side kick panel.
More Information >Trailer Brake Controller Specs:
Features:
This proportional brake controller has simple controls and a digital display for diagnostic information. Includes 3 boost levels, a slide-bar manual override, built-in battery protection, automatic leveling, and continuous diagnostics.
Installation Notes:
You need item ETBC7 ($129.26) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
You may also need a 4-Flat connector to complete your wiring.
More Information >Code: C84VV-C51436
Trailer Brake Controller Specs:
Features:
An easy-to-read digital number display, 10 power levels, and a pinch-trigger manual override make this time-delayed brake controller easy to use. Installation is simple with no mounting restrictions. Activates brakes with a preset intensity.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
Tech Tip:
Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.
More Information >Code: C74VV-C51436
Trailer Brake Controller Specs:
Features:
A simple LED display and a pinch-trigger manual override make this time-delayed brake controller easy to read and easy to use. Installation is quick and simple with no mounting restrictions. Activates brakes with a preset intensity.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
Tech Tip:
Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.
More Information >Trailer Brake Controller Specs:
Features:
This proportional brake controller automatically syncs to your vehicle's computer network for smooth, precise braking. Low-speed brake adjustment gives you 2 settings for different speeds. Plug-and-play controller mounts in any direction.
Installation Notes:
You need item ETBC7 ($129.26) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
Power output and braking aggressiveness can be easily adjusted with built-in buttons on this time-delayed brake controller. Includes digital display and manual override. Activates brakes with a preset intensity.
Installation Notes:
You need item ETBC7 ($129.26) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight. The Elite's unique user-controlled mode gives you direct control of your braking for any weather or terrain.
Installation Notes:
You need item ETBC7 ($129.26) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
Bluetooth-enabled brake controller lets you monitor and control your towing directly from your phone. Create multiple trailer profiles and tweak your settings in the app. Main unit mounts out of sight under your dash.
Installation Notes:
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
Tech Tip:
Some models do not have power run to the brake controller port under the dash. If this is the case, we have wiring kit BRK-ELECKIT which you can use to run power to the brake controller port.
More Information >Trailer Brake Controller Specs:
Features:
Bluetooth-enabled brake controller lets you monitor and control your towing directly from your phone. Create multiple trailer profiles and tweak your settings in the app. Main unit mounts out of sight under your dash.
Installation Notes:
You need item ETBC7 ($129.26) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
You may also need a 4-Flat connector to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
This proportional brake controller keeps towing simple with a straightforward design and user-friendly controls. Includes an LED indicator and a slide-bar manual override. Adhesive backing gives you the option of drill-free mounting.
Installation Notes:
You need item ETBC7 ($129.26) to install your controller.
Vehicles built before August 2021 are not equipped with provisions to install an aftermarket brake controller. Must be hardwired. To ensure you locate the proper vehicle wiring for stoplight, contact your local authorized dealer or vehicle’s manufacturer.
You may also need a 4-Flat connector to complete your wiring.
More Information >Videos
for Trailer Brake Controller
Help Articles
for Trailer Brake Controller
Expert Answers
for Trailer Brake Controller
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
view full answer...I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your…
view full answer...I&…
view full answer...The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…
view full answer...The number you provided,…
view full answer...The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…
view full answer...To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…
view full answer...For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…
view full answer...If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…
view full answer...Filter Products (52)
Contact and Help
What our customers are saying:
The Experience Has Been Great.The People I Have Spoken To Have Answered Any Questions I may have had. I have Nothing But positive Thoughts About The Company. I Will Purchase again!!!!!!!
James
New Fairfield, CT