2020 Freightliner Sprinter 4500 Brake Controller

Features:

The large, digital, LED display and clearly labelled buttons on this proportional controller make it easy to use. Includes 3 levels of boost, a slide-bar manual override, built-in short circuit protection, and automatic leveling.

Installation Notes:

You need item ETBC7 ($121.30) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large, digital LED display, 3 boost levels, battery protection, and continuous diagnostics.

Installation Notes:

You need item ETBC7 ($121.30) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

This proportional brake controller is designed to keep towing simple. Includes an LED braking indicator, a slide-bar manual override, and a knob to adjust braking power. Mounts easily within a 90-degree vertical range.

Installation Notes:

You need item ETBC7 ($121.30) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

This unique brake controller mounts on your trailer instead of in the cab so you can tow your trailer using any truck. You'll control your settings from the handy key fob remote.

Installation Notes:

You need item ETBC7L ($96.74) to install your controller.

Features:

This proportional brake controller automatically syncs to your vehicle's computer network for smooth, precise braking. Low-speed brake adjustment gives you 2 settings for different speeds. Plug-and-play controller mounts in any direction.

Installation Notes:

You need item ETBC7 ($121.30) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

This stout brake controller has easy-to-reach button controls up front and a simple slide-lever manual override. The digital display is large and easy to read. And the included splice-in harness and mounting bracket make for simple installation.

Installation Notes:

You need item ETBC7 ($121.30) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.

Installation Notes:

You need item ETBC7 ($121.30) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

This time-delayed brake controller is designed to mount at any angle, even upside down. The controls are all up front for easy access, including a slide-bar manual override and a thumbwheel for braking output. LED indicator shows your braking status.

Installation Notes:

You need item ETBC7 ($121.30) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

Simple and rugged, this time-delay brake controller is able to install in any direction, even upside down. Includes a large digital display with a dark smoke lens that can be read even in direct sunlight. Activates brakes with a preset intensity.

Installation Notes:

You need item ETBC7 ($121.30) to install your controller.

Due to the vehicle's wiring system, stop light switch kit RM-751493 may be needed; sold separately. Modification of the bracket will be necessary for installation.

You may also find the cold side of the brake signal in the wiring above the brake pedal. An LED circuit tester will be required due to the weak signal of the wire.

You may also need a 4-Flat connector to complete your wiring.

Features:

You can stick the control knob to the dashboard, plug in the module, and your brake controller installation is done with no drilling and no hardwiring. The knob is large and easy to use, while the main unit is out of sight behind the dash.

Installation Notes:

You need item ETBC7L ($96.74) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The plug-and-play unit mounts under your dashboard, out of sight and out of your way.

Installation Notes:

You need item ETBC7L ($96.74) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This compact brake controller fits nicely in your cab. It's designed to mount flush to the dash and is only 1" thick. The controls are simple, the LED display is large and bright, and the manual override is easy to reach in a pinch.

Installation Notes:

You need item ETBC7L ($96.74) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display is large and bright so it's easy to see, while the large manual override is easy to reach in a pinch.

Installation Notes:

You need item ETBC7L ($96.74) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

This compact brake controller fits nicely in your cab. You can mount it anywhere you like and it's only 1" thick. The LED display keeps it simple with bar indicators, while the large manual override is easy to reach in a pinch.

Installation Notes:

You need item ETBC7L ($96.74) to install your controller.

You may also need a 4-Flat connector to complete your wiring.