1984 GMC Suburban Brake Controller

Features:

Mount the control knob of this proportional controller on your dash or console, and affix the main unit in an out-of-the-way spot. 3-Axis accelerometer ensures unit works no matter its positioning. Switch modes to get preset braking for off-roading.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Bluetooth-enabled brake controller wirelessly connects to your smartphone, turning your phone into a brake control interface. The compact unit plugs in line with your 7-way trailer connector - no complicated install and no bulky cab-mounted unit.

Installation Notes:

You need item ETBC7L ($82.63) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Features:

Proportional brake controller automatically levels when mounted within a 90-degree vertical range. Includes digital display, 3 boost levels, battery protection and continuous diagnostics. Easily transfer between different automobiles.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Proportional brake controller installs anywhere in your cab and at any orientation. User-friendly, dash-mounted control knob with 10 tri-color LEDs creates a clean, OEM look. Easily adjust braking output, switch between modes, and view diagnostics.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Brake controller activates trailer brakes in proportion to deceleration. LED screen shows settings and diagnostics. Features 3 boost levels. Automatically levels when mounted within 90-degrees in the vertical plane.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Proportional brake controller can be mounted within a 90-degree vertical range. LED monitor indicates braking action of trailer. Fine-tune power adjustment lets you set braking intensity to suit your towing needs.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Easy-to-use brake controller activates your trailer brakes electronically when you engage the brakes in your tow vehicle. Set braking intensity to your preference and towing application.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Electric brake controller installs on your trailer - no box to get in the way in your cab, and you can easily switch between different tow vehicles with no extra setup. Adjust power settings to suit your trailer weight and desired braking intensity.

Installation Notes:

You need item ETBC7L ($82.63) to install your controller.

Features:

Palm-size brake controller activates trailer brakes with preset intensity when you apply the brakes in your vehicle. Adjust power output and braking aggressiveness with easily accessible, up-front buttons. Digital display and manual override.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Electronic controller activates electric trailer brakes with a preset intensity when you apply the brakes in your vehicle. Power output and braking aggressiveness are easily adjustable. Includes easy-to-read digital display and manual override.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Mount the control knob of this brake controller on your dash or console, and affix the main unit in an out-of-the-way spot. Controller activates trailer brakes with a preset intensity when you apply the brakes in your vehicle. Great for off-roading.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Electronic controller activates electric trailer brakes with a preset intensity when you apply the brakes in your vehicle. Power output and braking aggressiveness are easily adjustable to suit your preference.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Brake controller engages trailer's brakes in proportion to deceleration. Mounts with included sleeve within a 125-degree range. Easily adjust power output and braking aggressiveness. Includes digital display, audible alert, and manual override.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Brake controller activates trailer brakes in proportion to deceleration. Plug-and-play design automatically syncs to your vehicle's computer network for precise braking. Pair with Tuson ActuLink actuator system for enhanced network monitoring.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Brake controller activates trailer brakes in proportion to deceleration. Plug-and-play design automatically syncs to your vehicle's computer network for precise braking. Low speed brake adjustment. No directional mounting required.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Brake controller engages your trailer brakes with a preset intensity when you apply the brakes in your vehicle. Power output and braking aggressiveness can be easily adjusted with built-in buttons. Includes digital display and manual override.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Economically priced brake controller automatically engages your trailer's brakes with a preset intensity when you apply the brakes in your vehicle. Power output is easily adjustable. Includes LED indicator and manual override.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Brake controller engages your trailer's brakes in proportion to deceleration. Mounts within a 125-degree vertical range. Easily adjust power output and braking aggressiveness. Solid-state design with digital display and manual override.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Proportional brake controller mounts easily. Digital display indicates braking action of trailer. Fine-tune power adjustment has 5 levels so that you can set braking intensity to suit your towing needs.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Proportional brake controller automatically levels when mounted within a 360-degree vertical range. Includes digital display, 3 boost levels, battery protection and continuous diagnostics. Easily transfer between different automobiles.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Electronic controller activates electric or electric-over-hydraulic trailer brakes with a preset intensity when you apply the brakes in your vehicle. Power output and braking aggressiveness are adjustable. Includes LED display and manual override.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Proportional brake controller automatically levels when mounted within a 90-degree vertical range and a 40-degree horizontal range. Includes digital display, 9 sensitivity settings, reverse-polarity protection, and continuous diagnostics.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Brake controller activates trailer brakes in proportion to deceleration. Large digital LED screen clearly displays settings. Gain wheel provides preset levels of braking. Automatically levels when mounted within a 125-degree range.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Proportional brake controller automatically levels when mounted within a 360-degree vertical range. Includes customizable LCD display, storable settings, 3 boost levels, battery protection and continuous diagnostics. Transferable between automobiles.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

Brake controller activates trailer brakes in proportion to deceleration. Plug-and-play design automatically syncs to your vehicle's computer network for precise braking. No directional mounting required. Large display provides diagnostics.

Installation Notes:

You need item ETBC7 ($111.97) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.