Hey Chris, the CURT Class 3 Trailer Hitch # C37RV won't require any bumper modification, but the etrailer Class 3 Trailer Hitch will require some underbody panels/fascia to be trimmed for install. view full answer...
I recommend the EcoHitch Stealth Trailer Hitch Receiver # EH45SR for your 2024 Hyundai Elantra Blue hybrid as the Draw-Tite # DT75MR will not fit. The EcoHitch is a great option as it has the removable 2" receiver opening allowing for a larger selection of accessories and ball mounts. It is also removable so when not needed you maintain the clean factory appearance you currently have. A portion of your rear fascia will need to be trimmed for this to fit.
I recommend also installing the... view full answer...
Good question, Todd!
I looked at some pictures we have of the Curt # C37RV hitch installed on a 2024 Hyundai Santa Fe and I think I found a good way to do it. Take a look at the picture I have included and you will see what I am thinking (circled in red). Mounting the # 18136 bracket to the bottom of the hitch should allow it to completely clear the bumper fascia, and it will come out far enough to allow easy access as well.
From here, you will need to choose wiring if you haven't already.... view full answer...
Hello Gary. It looks like the Curt Class 3 Hitch # C37RV for the 2024 Hyundai Santa Fe is still in production. As of right now (4/19/24) we are expecting them to be available by early-mid July. They are currently available for pre-order if you want to get your name on the waiting list. The 2023 model did use the same hitch for hybrid and non-hybrid models and this SHOULD be the case for the 2024 models, although this has not yet been confirmed by the manufacturer. We will know for sure... view full answer...
The difference between the etrailer # e95ZR and Curt # C13427 trailer hitches for your 2023 Hyundai Palisade is literally just the finish.
The etrailer hitch has a matte black finish while the Curt hitch has the classic glossy black finish that we see with essentially all other trailer hitches. I personally like the matte black finish a bit more because I feel like it tends to blend in with the black finish on most vehicles better so I recommend going that route.
I'm attaching some installation... view full answer...
For your 2020 Hyundai Palisade Limited edition you will need a wiring kit to transfer the light signals to your trailer, the pre-wiring provides a plug for the trailer wiring to hook up. I recommend Curt T-Connector Vehicle Wiring Harness # CU94FR. It provides a 4 way flat trailer connector and hooks directly into the tow package plug on the underside of your Palisade. It is a 1 piece, or 1 end connector, however there are adapters that will allow you to have both a 7 and 4 way like your... view full answer...
The factory wiring for both the 2023 and 2024 Hyundai Palisade has been a complicated subject. The pre-wiring you're referring to is not an actual trailer connector. You should have factory wiring and connectors which will allow you to add an OEM 7-way. I understand it says they all have this, but I would make sure you can find it on your particular vehicle if you plan to use it. There have been a lot of reports on forums where people said the connection was missing.
At this time, nobody... view full answer...
Hi Robert; I have attached the installation instructions for the Draw-Tite Max-Frame Trailer Hitch Receiver # DT27YR below. If you plan on towing you will also need the Curt # C59NR for wiring and a ball mount like the etrailer # e67DR view full answer...
Hey Eric, I am not seeing any other messages from you so I wonder if there was maybe a typo in your email address. But anyway for a hitch the etrailer part # e24ZV would be a great option for your 2025 Hyundai Santa Fe. Then for trailer wiring the Curt # C29ZV would work great too.
I attached links below with current pricing as well. view full answer...
Hey Ivan! The Curt # C37RV and TowSmart # TS44ZR probably do sit a little lower than the factory hitch, but it doesn't look like it is a significant amount. The bumper is slightly different with a cutout for the hitch if you have the factory hitch. We don't have those measurements so I can't tell if it is for aesthetics or if it is necessary for the hitch to fit. The height of that hitch is not something available to us.
The only hitch I can give you the height on is the Curt # C37RV since... view full answer...
Hi Natalie,
Definitely smart to check, and the correct trailer hitch for your 2023 Hyundai Kona Limited is the Curt Trailer Hitch Receiver # C87DR.
I went ahead and double-checked with the manufacturer for you just to make sure. view full answer...
Hey Joe. There's no timeline for when a plug in wiring harness will be available for a 2025 Hyundai Santa Cruz. I completely get your resistance to wanting to cut into the wiring on your brand new vehicle. Congrats btw! The only solution I have for you is the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT.
The ZCI item # 119250KIT clamps to your Santa Cruz's wires instead of splicing into them. The sensor detects the... view full answer...
We definitely have what you need to equip your 2020 Hyundai Palisade with a 7-Way connector, however there isn't a single part number available for this vehicle to accomplish this.
You will instead need to start by adding a 4-Way harness (if there's not one already present). For this the Curt T-Connector Vehicle Wiring Harness # CU94FR will work perfectly. This custom harness will plug right into an existing port behind the Palisade's rear bumper on the driver's side. I have attached... view full answer...
Hi Vaughn!
As long as your 2025 Hyundai Tucson has the towing package (you will need to contact a Hyundai dealer with your VIN if you are unsure about having it or not) and you do not have the N-Line package, the Tekonsha # 118784 will plug right in and you are good to go!
Do you already have a hitch installed? view full answer...
Hey Steve, thanks for reaching out!
The correct hitch fitment for your 2025 Hyundai Santa Cruz is the Curt Trailer Hitch Receiver # C23WR.
If you let me know what you plan on using the hitch for I'd be more than happy to help you out with any additional recommendations if necessary! view full answer...
The only hitches available for the 2023 Elantra are the # DT75MR you mentioned and the # C53NR. Neither of these fit the N model. If you want to add a hitch to your 2023 Elantra N the only option is to get the # E17. You can take this to a local fabricator and they will be able to fashion a hitch for your vehicle. view full answer...
Hey Frank, for your 2025 Hyundai Tucson the hitch I would recommend is the Curt part # C94WR which is mostly hidden, has great towing capacities, and also is priced lower.
For trailer wiring I would then recommend the part # CU94FR for a 4-way or the part # C68JR if you need a 7-way.
What are you planning on towing? view full answer...
Hello Tim,
I take it you already have the bike rack which is why you are looking for the 1 1/4" receiver. We only have the 2" receiver for the 2024 Hyundai Kona but that's ok because we can make it work.
If your Kona is the Electric, N Line, and N models you will want the Curt Trailer Hitch Receiver - Custom Fit - 2" # C43RV.
If your Kona is NOT the Electric, N Line, and N models you will want the Curt Trailer Hitch Receiver - Custom Fit - 2" # C39RV or the Draw-tite one you were looking... view full answer...
I checked with Curt and their trailer wiring harness part # C99KR is a confirmed fit for the 2023 Hyundai Kona ev as it is a fit for all models. view full answer...
Go To Results