The only hitches available for the 2023 Elantra are the # DT75MR you mentioned and the # C53NR. Neither of these fit the N model. If you want to add a hitch to your 2023 Elantra N the only option is to get the # E17. You can take this to a local fabricator and they will be able to fashion a hitch for your vehicle. view full answer...
Hey Bruce, since the Draw Tite hitch part # DT27YR fits right up under the rear bumper you'd lose right at 2.5 inches of rear ground clearance like you see in the attached picture. view full answer...
Hello Luke. Yes, the Curt Hitch # C43RV will indeed fit the 2025 Hyundai Kona Electric. Curt confirms this to fit the EV and N Line models of the 2025 Kona. view full answer...
Hey Andrew, it doesn't look like Inno has any roof rack fits for your 2024 Hyundai Santa Fe with raised side rails at this time so since there isn't a way to reuse the Inno bars you have now a new roof rack system like the Rhino Rack part # RR74GE would be the way to go. view full answer...
Hey Eric, I checked EcoHitch just now and for your 2024 Hyundai Ioniq 5 we do have the hitch part # EH48SR as a confirmed fit. What are you planning on using the hitch for? view full answer...
Hey Chuck. Since your 2017 Hyundai Santa Fe Limited Ultimate has a glass roof, I recommend the Yakima FullBack 2 Bike Rack - Trunk Mount item # Y02634. It has adjustable arms that will provide a secure fit to the back of your Santa Fe. The rubber and foam pads will help to protect the paint from scratching/scuffing.
The Yakima FullBack item # Y02634 has anti-sway cradles with ratcheting ZipStrip straps that secure your bike frames at three points. This helps to prevent sway and bike-to-bike... view full answer...
Hi Heeth! I see you already ordered 7-way wiring and the Curt TriFlex NEXT # C25YV. Did you also find a hitch? If not, I recommend the Curt Trailer Hitch Receiver # C23WR. However, aftermarket hitches are not compatible with a weight distribution hitch so you won't be able to use one. The same is probably true for an OEM hitch and it is the vehicle that is the limiting factor.
Once you get everything hooked up take a look and see if you have a lot of sag from your trailer. Custom fit... view full answer...
Hey Gene, first of all, thanks very much for the kind words it is absolutely appreciated. And between the two hitches for your 2023 Hyundai Santa Cruz, the one that is least visible is the Curt Trailer Hitch Receiver # C23WR.
When we test fit these, we found the # C23WR is tucked up about an inch more than the Draw-Tite # DT48GR.
I have added a photo showing the Curt hitch on a Santa Cruz, and as you can see most of the tube is hidden behind the step portion of the bumper. Some of it... view full answer...
As of (09/30/2024) we do not and none of our vendors have made a custom fit wiring harness for the 2025 Hyundai Tucson, yet. The only option available would be a universal harness like the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT.
The item # 119250KIT harness uses sensors that clamp onto the factory wiring of your Tucson. These clamps transfer the signal for the harness to activate your trailer's lighting functions. view full answer...
Hey Brian, yes the Curt hitch part # C37RV does fit the hybrid models of the 2025 Hyundai Santa Fe. What do you plan on using the hitch for? Towing? view full answer...
Hi Glen,
We have a trailer hitch fit for your 2025 Hyundai Santa Fe hybrid, but not an etrailer-branded hitch. The hitch that fits your Santa Fe is from Curt, and is the following part number:
- Curt Trailer Hitch Receiver # C37RV view full answer...
Hi Jeff!
I checked with EcoHitch and their Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" # EH72HR will fit the 2025 Ioniq 5, Ioniq 5 N, and the Ioniq 5 XRT, so you are good to go!
What will you be using the hitch for? view full answer...
Hi Fern; unfortunately, it looks like nobody makes a hitch that fits your 2019 Hyundai Accent Hatchback. This means the only option would be to take the # E17 to a local fabricator and have them fashion a custom hitch for your vehicle. view full answer...
Hey Lloyd, I am not totally sure what info you are looking for but the Yakima Jetstream roof rack part # Y42GD is a great option for a roof rack that fits the raised rails of your 2024 Hyundai Santa Fe. Did you have a more specific question? view full answer...
Hey Samuel, so the Draw Tite hitch part # 24963 has a hitch tube depth that would be deeper than what any hitch accessory designed for it would need but what I think you are asking about is the little weld stop that's in Class I hitches like this that prevent Class II accessories from fitting and you are trying to make sure your accessory will fit.
So Class I accessories have a little notch in their shank to allow them to fit but Class II do not which is why they stop short. So if the... view full answer...
Hi Joanna!
The Thule Motion 3 XL # TH67PN, Force 3 L # TH67SA, and Force 3 Sport # TH77SA all use the same clamping system, as do all the new Thule roof boxes for that matter. With that said, we generally say to not open the sunroof/moonroof with something like this installed. There is a chance it won't cause any interference, but there is also a chance that it will. We haven't had a 2025 Hyundai Hybrid Santa Fe to test this as of yet, so we can't say for sure.
Do you already have a roof... view full answer...
Hello Greg, thanks for reaching out. We do carry the 2004705245 Konig chains as part # TH01594245. There is a list of a few compatible tire sizes for these chains, but sadly the 235/55-19 are not on the list. There is a chance the # TH01594245 chains may fit, but since they are not made for the 235/55-19 they may not fit correctly and using improper chains can be dangerous. Since you already have the chains you could do a test fit in your driveway and see how it goes.
My recommendation... view full answer...
Hey Greg. We'll have one as soon as Curt or Tekonsha make one for your 2025 Hyundai Tucson that actually fits. I just checked their websites and they do not list anything custom fit.(09/15/2025)
The only option I have for you is the ZCI Circuit Protected Vehicle Wiring Harness item # 119250KIT. This is a universal harness that uses clamps instead of splicing. These clamps attach to your tail light wires and sense the signals being sent through them. This is sent to the 4-way connector... view full answer...
Hello Victor, thanks for reaching out. We do offer a trailer hitch for the 2005 Hyundai Santa Fe, but the 13473 hitch you mentioned is only for the 2021 - 2023 Hyundai Santa Fe, so this will not work for you. The correct hitch for the 2005 Santa Fe is the following:
- Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13505 view full answer...
Hey Mike, my hope is that the Curt trailer wiring connector part # CU94FR does get carried over for the 2025 models but at this time it's only been listed up to the 24 models. We don't have any confirmed fits quite yet. view full answer...
Go To Results