Trailer Hitch Receiver Which Fits a 2024 Hyundai Elantra Blue Hybrid

Question

Question:

Hello, Looking at Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4inch Item DT75MR I have the 2024 Hyundai Elantra Blue hybrid model. Will this still fit that model? Is any modification/cutting of the bumper area needed for proper fit? Thanks for your assistance!

asked by: Jason

0

Expert Reply:

I recommend the EcoHitch Stealth Trailer Hitch Receiver # EH45SR for your 2024 Hyundai Elantra Blue hybrid as the Draw-Tite # DT75MR will not fit. The EcoHitch is a great option as it has the removable 2" receiver opening allowing for a larger selection of accessories and ball mounts. It is also removable so when not needed you maintain the clean factory appearance you currently have. A portion of your rear fascia will need to be trimmed for this to fit.

I recommend also installing the 4-Way # TK86FR with the receiver. This is the most common connector used for small trailers you may haul one day and will also allow for Auxiliary Lights # C53201 should your hitch mounted accessory impair the view of your tail lights.

expert reply by: Bud M

0

Jason

6/20/2024

Thank you Bud, I appreciate the detail in your reply. I’m afraid that’s more than I was looking to spend at this time. I’m ultimately just looking to attach a hitch-mounted bike rack, so the price-point of the other model I was considering made it attractive. If I can ask one more follow-up question, are there any other models that would fit a 2024 Elantra Blue Hybrid? Thanks again for your time

Bud M.

6/25/2024

@Jason We do have the Draw-Tite Sportframe Trailer Hitch Receiver # DT26PR as well. Do understand this only has the class 1, 1-1/4" hitch opening so it can limit you to what bike racks you are able to use. A bike rack like the Kuat # SH12B would be a great option to go with this receiver as it is a lightweight aluminum construction.

Gustavo

6/3/2025

Hi Bud. I have a question for you. I'm looking to Haul a trailer with a jet ski. I have an 2022 Elantra N LINE. I'm pretty sure that EH45SR is going to be ok for my car but I need to hear your expertise. Thanks a lot

Jesse M.

6/3/2025

@GustavoHello Gustavo. The EcoHitch # EH45SR is for the Hybrid only, so this would not be correct for the N Line model. At this time there is no trailer hitch for the 2022 Elantra N-Line. Stealth Hitch is working on developing a hitch for this model, part X5005S-P, but this is not available yet. I am afraid there is no ETA at this time. It is for sure coming though we just don't know when.

Answer 1

Hi Donald! Installing the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C87MJ on your 2023 Hyundai Elantra Hybrid is going to be some work, if I'm being honest. I have the instructions linked to the page, but you will need to…

view full answer...

Answer 2

For a spare tire carrier that can fit on a 2 inch frame like what your trailer has we offer the CE Smith Offset Spare Tire Carrier #CE27310G which can fit trailer frames that are up to 3 inch wide by 5 inch tall so it would easily fit on a 2 inch by…

view full answer...

Answer 3

Hey Charles, I attached a link to the install instructions for the Draw Tite hitch part #DT26PR that fits your 2024 Hyundai Elantra. You might need to scroll down a bit to find them.

view full answer...

Answer 4

According to Draw-Tite, their 24999 Class I hitch which we sell as part #DT75MR is a fit for all 2021 Hyundai Elantra models except for the N Line model. Draw-Tite mentions in step #5 of the installation instructions that the rear fascia will need to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Trailer Hitch Receiver Which Fits a 2024 Hyundai Elantra Blue Hybrid

Products Featured in This Question

Continue Researching