We do in fact have the replacement hardware for your Sears X-Cargo carrier.
You will need the Replacement Hardware Kit for Searsbox Cargo Box # TH05603 which includes everything you need to get your Sears X-Cargo back on the road. No drilling would be required. view full answer...
Thanks for the question, Chris!
The Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT66GR is confirmed to fit all models of the 2022 Ford Explorer so it will definitely fit the ST-Line you're asking about. If you'll be doing any towing be sure to pick up the Quick Links # RM-910022 as well so you have easier access to connect your safety chains.
There are similar trailer hitches that have a hidden crosstube, but the Hidden Hitch is very unique in that it's the only option for your... view full answer...
Hey Don; good question and no other parts - including any type of adapter plate or mounting plate - is needed to mount the 30 Amp Go Power PWM Solar Charge Controller with Bluetooth # GP76QR.
The # GP76QR comes with screws and is ready to be mounted when you get it. view full answer...
I have a super easy brake controller solution for your 2017 Ford Explorer with the Curt Echo brake controller part # C51180 which plugs into an active 7-way and once synced to a smartphone is ready to tow.
For an easy to install 7-way kit all you need then is the part # C56306 which plugs into the square trailer wiring connector at the rear of your vehicle. I attached an install video for this that shows it installed on a 2017 Explorer just like yours.
Other installs will require hardwiring... view full answer...
It looks like a Hayes Brake magnet part number 73400. We do not carry this part but I did a quick internet search and was able to find a couple places that sell them.
From the research I did it looks like this is an older style of brake magnet used in the 1980's. view full answer...
The most hidden trailer hitch that fits your 2022 Ford Explorer Limited is the Draw Tite hitch part # DT66GR which has a lower opening that can completely be removed when not in use. This means that the hitch can be completely invisible when not being used. view full answer...
Hello Luther,
Congrats on the new 2025 Explorer! Yes, you are correct. The # 27-6125 would just be the running boards without the custom brackets. For your 2025 Ford Explorer you will want the Westin Sure-Grip Running Boards w/ Custom Installation Kit - 6" Wide - Black Aluminum # W64ZX, this part number is going to be the running boards and custom brackets. I attached the instructions so you can see what you are getting yourself into.
What is your favorite new feature on the new ride? view full answer...
Hey Melinda, it is possible to fit two of the Thule Hullavator kayak carriers # TH898 on the roof of your 2016 Ford Explorer but you will need to install and aftermarket roof rack with slightly longer crossbars like the Rhino Rack part # RR98VE. Your roof would easily be able to handle the weight of two of these racks plus two 40 lb kayaks as well.
What kind of kayaks do you have? view full answer...
To install your Reese Pod brake controller in your 2018 Ford Explorer will require the install harness part # 3035-P which is a confirmed fit. If you check out the 9:55 mark of the install video I attached to this page you'll see where to find the port on your vehicle to plug the controller in. It is a bit hidden under the dash underneath the panels. view full answer...
Hey Thomas. ROLA went out of business quite awhile ago but you can use the Optronics LED Trailer Light item # STL72RB to replace the ones on the ROLA 10188 Adventure system. These are the same size as the ones used to replace the lights on the Rola Swinging Enclosed Cargo Carrier you purchased back in 2017.
Are you still using the original one you got from us? view full answer...
The two orange fittings at the ends of the RhinoFLEX RV Sewer Hose, part # CAM39761, are designed to come of easily.
The ends can be removed by twisting the black locking rings until loose. From there, you can unscrew the orange fittings. This makes replacing the ends much simpler.
I've linked to a video review of this hose for you to look at. view full answer...
If your 2017 Ford Explorer has the factory prep towing package installed, then you might have a brake controller plug-in wiring on the vehicle to connect your brake controller. However, not all models with the tow package had the wiring installed and you might have to install an extra kit.
One way to check would be to see if you have a 7-way trailer connector already installed on the rear of your Explorer. If the 7-way is present, then you should have the prep wiring install to plug in... view full answer...
For a great way to attach your # 118540 to your 2013 Ford Explorer, I recommend the Mounting Bracket 4-Pole Flat # 18144 along with the no-drill mounting bracket # 18136 for a drill-free solution.
I went ahead and attached videos that shows you the installation process of these parts. view full answer...
Yes, the Curt Custom Wiring Adapter for Trailer Brake Controllers part # C51322 will allow you to use a Curt brake controller like the Curt Spectrum Trailer Brake Controller part # C51170 on a 2020 Ford Explorer (All Models). I checked with Curt just to confirm that the Curt Custom Wiring Adapter for Trailer Brake Controllers is indeed correct for a 2020 Ford Explorer so you can be confident this is the correct harness.
The plug will be located under the driver dash, near the center console... view full answer...
The trailer wiring harness you referenced, Hopkins # HM48895, is intended for vehicles that use LED taillights which draw relatively little power as compared to standard incandescent lights. I do not believe that your 1995 Ford Explorer came equipped with LED-type lighting and this harness is not among those recommended for your vehicle.
The red wire on this harness does connect to the brake light circuit as you noted in the instructions. You can identify which wire at your Explorer's... view full answer...
Hey Rocha! The best running boards for your 2023 Ford Explorer are going to be the Westin R5 Nerf Bars item # W68NR in Black or item # W48NR in Stainless. These 5" custom fit running boards come with included hardware that does not require drilling to install. The curved pads are formed to the tubing to prevent damage to the ends of the bars. The groves also provide better traction.
I have linked an installation video below along with the instructions so you can see how to get these step... view full answer...
Hi Ean!
For your 2022 Ford Explorer without the factory towing package, you are going to want the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56093. Not sure why that isn't showing up when your vehicle is put into our fit-guide, but I will have that looked at. It definitely should.
Anyway, this is a plug and play harness, though you do need to run a wire to the battery for needed power. I included an install video we did with this harness going on to... view full answer...
Hey Adrian, it's not uncommon for Police vehicles to be missing random harnesses and features as I have a Tahoe PPV and it's really bizarre some of the things it has and doesn't have. I would look behind the bumper for a harness that could maybe plug into that 7-way but otherwise you would probably just want to get a # 37185 to convert the 4-way to a 7-way and be done with it. Does the trailer have brakes that you need to operate? view full answer...
We can most likely help with what you need but we need more info from you to pick out what you need.
For hub/drum replacements I need to get the bearing numbers from your old hubs or the dimensions of the spindle on your trailer axle. From there we will be able to determine which brake assemblies you'd need.
Then for wheel and tires I need the bolt pattern of your wheels and the tire size that's on the sidewall as well. Do you have a 4-way or a 7-way connector? view full answer...
Hi Andy; if you have the factory brake controller port on your 2022 Ford Explorer I expect it to have factory wiring at the rear. Have you checked to see what your 4-way is connected to? Do you have a connector back there that looks like it would fit the connector pictured below?
If the 4-way isn't plugged into a round connector like this I would look to see if it is hanging/connected somewhere at the rear behind the bumper with a dummy plug in it. If you have this connector you can use... view full answer...
Go To Results