See what our Experts say about this CURT Accessories and Parts

• Looking for Mounting Bracket for 6-Way for Flat Towing Setup
  Hey Mike, for a 6-way mounting bracket you could use with the Pollak 6-way part # PK11609 you'd want the part # C92CR. What vehicle are you flat towing?
  view full answer...
• Is There A 6-Pole Mounting Bracket That Has A Mounting Location For A Breakaway Switch?
  Hey Rege, thanks for reaching out. We do have mounting brackets for the Pollak 6-Pole Round Pin Trailer Wiring Socket # PK11608, and the one I recommend is # C92CR. That bracket gives you a clean, secure way to mount the socket to the bumper or hitch, but it doesn't include a mounting location for a breakaway switch. The breakaway switch is normally mounted separately on the trailer tongue, close enough to the coupler that the breakaway cable can attach directly to the tow vehicle. That...
  view full answer...
• How to Power an Electric Winch on a Trailer Pulled By a 2017 Subaru Forester
  You do have a few options to get an electric winch, like the Dutton-Lainson StrongArm # TW4015, working, but the 4 Flat will not be able to do so alone. The first will be to add a battery to the trailer. This will usually be my suggestion, but as you do not have brakes on the trailer and it is for a boat trailer, it will not be the best way to go. What I suggest doing is upping your 4 Flat to a 5 Round, both on the trailer and vehicle. The Pollak 5-Pole # PK11502 for the vehicle side,...
  view full answer...
  
• How to Install 6-Way Round Connector on Honda CR-V
  Hey Douglas! As you can see in the photo below, some baseplates (like the Blue Ox Base Plate Kit # BX2258) have a built-in bracket for the 6-pin connector from the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-15267 to mount to. For use with your etrailer Invisible Base Plate Kit # e98955, you would need to use a Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket # C57202 and a Curt Mounting Bracket for 4-, 5-, or 6-Pole Round Trailer Connector...
  view full answer...
• Broken Screw in Hole for Trailer Connector Bracket on Blue Ox Base Plate Kit
  Yes, you can use part # C92CR with part # 18140 to attach the 6-way trailer connector to your Blue Ox Base Plate Kit. The no drill bracket wraps around the bar via the band clamp and then the other mounting brackets attaches to that. This will be the only other option we have for you to secure your trailer connector unless you were to drill out the damaged screw on your base plate kit.
  view full answer...
  
• Recommended Way To Mount Blue Ox 6 Wire Round Cord Onto Vehicle's Bumper Or Hitch
  It sounds like you are looking for hardware to mount the Blue Ox 6-Wire, Coiled Electrical Cord with 6-Way, Round Plugs # BX8862 onto your vehicle. You could go to your local hardware store to find screws/bolts that will hold it to your bumper or receiver. Or a better route would be to use Curt Mounting Bracket for 4-, 5-, or 6-Pole Round Trailer Connector # C92CR which is a bracket and hardware set to install a round 6 wire plug on a hitch receiver, frame, or bumper of a vehicle.
  view full answer...
• Mounting Bracket to Use with Curt Tow Bar Extension Cord w/ Socket C59HR
  Hey Anthony, it's pretty odd but the Curt tow bar wiring kit part # C59HR does not come with a mounting bracket for the 6-way so you would need to also go with the part # C92CR to mount it to the bottom edge of your front bumper.
  view full answer...
• Full Flat Towing Set Up For A 2026 Jeep Gladiator Sahara
  Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms # e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,500 lbs # e94ZR will compliment that perfectly. These include the safety cables, so no other parts will be needed for this portion. The Curt RVibrake Shadow 2 Flat Tow Brake System - Wireless Monitor - Proportional - Fixed...
  view full answer...
• Trailer Wiring Mounting Bracket and Hitch Recommendation for a 2016 Subaru Outback Wagon
  If you wanted to use the mounting bracket part # C92CR on the hitch you have installed on your 2016 Subaru Outback Wagon you would also need the bracket part # C57202 so that you wouldn't have to do any drilling. If you instead want a 7-way bracket then I recommend # HM48625. The # C57202 wraps around the hitch tube to provide a mounting bracket for the # C92CR or # HM48625. The hitch I would use on your vehicle would be the Draw-Tite part # 75673 because it is a Class III hitch that...
  view full answer...

Do you have a question about this Accessories and Part?