1. Vehicle Heaters
  2. Kats Heaters
  3. Engine Block Heater
  4. Frost Plug Style
  5. 600 Watts
  6. CSA Approved
Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 600W - 1-1/4"

Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 600W - 1-1/4"

Item # KH11624
lowest price pledge
Retail:$166.75
Our Price: $95.98
You Save: 42%
Vehicle Heaters
This item qualifies for Free Shipping
Shipping Weight: 1 lbs
Quantity: 
In Stock
Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 600W - 1-1/4" CSA Approved KH11624
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

This frost-plug heater replaces the frost plug in your engine block and submerges in the coolant to keep engine fluids from thickening. Results in easier start-ups, faster heating of your cab, and less wear and tear on your vehicle in cold weather. Lowest Prices for the best vehicle heaters from Kats Heaters. Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 600W - 1-1/4" part number KH11624 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (50)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Kats Heaters Vehicle Heaters - KH11624

  • Engine Block Heater
  • Kats Heaters
  • Frost Plug Style
  • 600 Watts
  • CSA Approved

This frost-plug heater replaces the frost plug in your engine block and submerges in the coolant to keep engine fluids from thickening. Results in easier start-ups, faster heating of your cab, and less wear and tear on your vehicle in cold weather.


Features:

  • Ensures smoother start-ups and faster heating and defrosting of your cab
    • Replaces frost plug (core plug) in engine block and submerges in coolant
  • Warms engine fluid to increase lubrication and performance
    • Keeps fluid from thickening and protects against damage in cold weather
  • Pre-heats engine to reduce condensation in the engine block
    • Emits less pollution and fewer gas emissions
  • Includes removable power cord
    • Route through your grille and plug into standard 120-volt AC outlet
  • Constructed of corrosion-resistant brass
  • Custom fit for your vehicle
  • CSA approved
  • Made in the USA


Specs:

  • Diameter: 1-1/4"
  • Wattage: 600 watts
  • Amperage: 5 amps
  • 1-Year limited warranty


Notes:

  • Do not use this heater with a 100-percent antifreeze solution.
  • Do not start your engine with the heater plugged in.

Start your engine easier and warm your cab faster in cold weather with this frost-plug-style engine block heater. Heating your engine coolant keeps it from thickening and freezing, resulting in more reliable start-ups and smoother operation altogether. It also lessens the workload and extends the life of your vehicle's battery. And because starting your engine when it's warm creates less condensation in the engine block than starting it when it's cold, your engine will get better initial fuel vaporization, which causes fewer emissions and less pollution.


This frost-plug heater replaces the core plug in your engine block. The power cord on the heater is removable so that you won't need to buy a whole new heater if the cord gets damaged. The cord can be routed through your grille for easy access to a 120-volt outlet or extension cord. If needed, a longer or shorter cord (sold separately) can be purchased to better fit your application. Make sure the heating element is fully submerged in the coolant before plugging it in.



11624 Kat's Heaters Custom-Fit Engine Block Heater - Core Frost Plug Style - Removable Power Cord - 120 Volts - 600 Watts





Video of Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 600W - 1-1/4"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Kats Heaters Vehicle Heaters - Engine Block Heater - KH11624

Today, we're going to take a look at the Kat's heaters 120 volt frost plug style custom engine block heater. Now this frost plug heater will replace the frost plug in your engine block and it submerges in the cooling to keep your engine fluids from thickening. It will ensure smoother startups, faster heating and defrosting of your cab and cold weather for less wear and tear on your vehicle. Basically this will replace the frost plug or the core plug in your engine block and submerges in the coolant. Does come with the included screw to install it. This will basically warm your engine fluid to increase lubrication and performance, keeps the fluids from thickening, protects against damage in the cold weather.

And it will preheat the engine to reduce condensation in the engine block. So it emits less pollution, fewer gas emissions. It does include this removable five foot long power cord and see right here, basically you route this through the grill, plug it into your heater.And then the other end you'll plug into a standard 120 volt AC outlet. Now it is constructed of corrosion resistant brass. It is CSA approved and made in the U.S.A.

The diameter on this, it's going to be right at one and a quarter inches. Wattage is 600 Watts. Amperage is five amps and a couple notes on this heaters. You do not want to use this heater with a hundred percent antifreeze solution And you do not want to start your engine with the heater plugged in. But that should do it for the review on the Kat's Heater 120 volt frost plug style custom engine block heater..


Customer Reviews

Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 600W - 1-1/4" - KH11624

Average Customer Rating:  4.4 out of 5 stars   (50 Customer Reviews)

This frost-plug heater replaces the frost plug in your engine block and submerges in the coolant to keep engine fluids from thickening. Results in easier start-ups, faster heating of your cab, and less wear and tear on your vehicle in cold weather.

- KH11624
by:

I bought this for my John Deere 4320 tractor. I had to take this to my local machinist to move the O-ring to 1/8" away from the plate; the plug opening has only 1/4" of wall available. It now fits and works perfectly!! Much better than the exorbitant price that JD asks for their block heater. I'm perfectly satisfied. 860314



- KH11421
by:

Review from a similar Frost Plug Style in Vehicle Heaters


We did get the package thank you for your great service! 461673



- KH11612
by:

Review from a similar Frost Plug Style in Vehicle Heaters


Overall the product is very good. Its a 5 BUT........ Easy to install, but You have to be very careful not to over tighten or rake it will leak. (Like I said, my gulag for over tightening it. (but dang, it is a real fine line between loose and over tightened! Lol) Maybe torque specs needed!?!? Used it to keep boat diesel motor warm all winter in the northeast. In any case, keeps the Lehman 120 Diesel in my boat toasty warm. (I installed two on a thermostat and it works like a charm. Fire her up in the middle of February to go out for cod. 729903



- KH11484
by:

Review from a similar Frost Plug Style in Vehicle Heaters


ordering was easy and the part was delivered a day early and customer service was great !!! 232723



- KH30108
by:

Review from a similar Frost Plug Style in Vehicle Heaters


I bought this as a supposed upgrade for the stock 750w heater in my 12v Cummins. This heater failed almost immediately, I think I used it twice before realizing it wasn't working anymore. etrailer was helpful and offered to exchange it under warranty, but I did some research and found a lot of negative reviews of this style of Kat's heaters. I decided I would be better off washing my hands of this heater altogether, and ultimately ended up installing two 750w Cummins heaters in my engine to satisfy my desire to upgrade. 386360



- KH11409
by:

Review from a similar Frost Plug Style in Vehicle Heaters


I just received this block heater today and have not installed it yet but it looks real simple. etrailer.com was a great price and fast shipping 481870


Comments
It was simple to install once I figured out how to drain the coolant from my 2016 Ford Edge. Had to remove a few vacuum lines in order to get my arm into the correct angle to thread it into the block. Works great. Far better than the $400 that Ford parts wanted for their kit.
Kevin - 03/06/2019

50184

- KH11487
by:

Review from a similar Frost Plug Style in Vehicle Heaters


hi put this block heater on a Kubota D1105 (RTV1100) , 2012. In place of a heater that was already there . tighten up screw to specs, I could take one finger and wiggle it. was worried when it got to temp , it would leak or pop out and lose my engine. the old one was a friction fit, not a butterfly hold . I have got other things from etrailer that were good, blocker heater did not work with this case. Not etrailer fault. KAT heater KH11487 not up to the job, have to go back to Kubota to get part. 611370



- KH11461
by:

Review from a similar Frost Plug Style in Vehicle Heaters


This review is for block heater KH11461 installed in a Mahindra 5010 with the 49 hp Daedong engine, after one year. This block heater came with the tapered bushing to fit in a 1 1/4" frost plug hole next to the starter. Tap out the frost plug (screwdriver, hammer) Tap in bushing (hammer piece of wood and sleeve retainer from NAPA). Screw in the block heater. Fill with antifreeze and run the engine to ensure there is no air in the cooling system to prevent burning out the heater. I also added a battery heater and trickle charger all on 1 cord permanently mounted under the hood. This now starts well below zero easily. etrailer has a video of this product. 738102



- KH30503
by:

Review from a similar Frost Plug Style in Vehicle Heaters


A little slow delivery, good prices, very good products so far. Electrical portion of my order needs more time for durability. 447116



- KH30517
by:

Review from a similar Frost Plug Style in Vehicle Heaters


I have used this type of Freeze Plug Heater on different pieces of equipment. With the cold weather is Wisconsin the engine is kept luke warm when this heater is pluged in. This product was offered at a fair price. Ounce we get the AC unit out of the way it should b a simple to install. 327362



- KH11409
by:

Review from a similar Frost Plug Style in Vehicle Heaters


It fit just right 441586


Comments
Thank yo u stretching is just fine
Louis - 10/12/2018

44537

- KH11412
by:

Review from a similar Frost Plug Style in Vehicle Heaters


Did not fit for my 2018 Rogue - apparently some of those motors do not allow for a plug 572629



- KH11409
by:

Review from a similar Frost Plug Style in Vehicle Heaters


excellent for farm tractors; use on perkins diesels ,and simpson diesels; just installed and is working fine! a good one should last 20 years; the one I replaced (for a tractor from a tractor supply house lasted less than 2 YEARS, the one before had gone the 20 years) your block heater has a heavy duty cord and the threaded cuff lock down nut on the sender was an all time first for me, thanks. To use this kit 11409 your must already have the block bushing or the bushing for a block heater for this kit will be # 11461b and about $7.00. Noticed your were in SPRINGFIELD TN; I farm in Tn and Ky. good for you. thanks again. TERRY FITZPATRICK, Austin, Ky 596118


Comments
EXCELLENT1
Terry f - 01/10/2020

64157

- KH11612
by:

Review from a similar Frost Plug Style in Vehicle Heaters


I am very satisfied. I had looked for awhile for this size and let me tell you, This company communicates and keeps you informed of your purchas and shipping. I installed this in a 1986 Massey Ferguson 3cyl diesel. No one else carries this size that I could find. I will buy from again. 486825



- KH11419
by:

Review from a similar Frost Plug Style in Vehicle Heaters


I keep it plugged in whenever the temperature goes below - 15 C. It keeps the engine oil warm, next time starting the car is easy and don't need to warm up before driving, which save time & gas. 605168



- KH11419
by: 11/13/2020

Review from a similar Frost Plug Style in Vehicle Heaters


911647



- KH11409
by:

Review from a similar Frost Plug Style in Vehicle Heaters


Works great. Much better than letting it idle for long periods of time. 908510



- KH11409
by:

Review from a similar Frost Plug Style in Vehicle Heaters


This worked perfectly. It wasn’t made for the tractor I put it on, so I had to fabricate an adapter and then all I had to do was plug it in. About 30 minutes after plugging it in and the engine will start in the coldest weather. Great product and great service from etrailer. 902044



- KH11407
by:

Review from a similar Frost Plug Style in Vehicle Heaters


Came a day later then the email said went together without a problem. 892694



- KH11419
by:

Review from a similar Frost Plug Style in Vehicle Heaters


good prices, good service, prompt deliv ery! thanks 860994



- KH11409
by:

Review from a similar Frost Plug Style in Vehicle Heaters


This product works perfectly! It was installed on a 2006 Ford Escape XLT. I had a dealership install the heater. Living in the Midwest, on mornings below 10 degrees, I can definitely tell a difference in the car starting. The heat was slightly warm immediately after starting the car. This heater was used everyday for four months in the middle of winter in ND. The car was parked outside all winter and was plugged in all night. No issues! I would highly recommend this product. 803392



- KH11409
by:

Review from a similar Frost Plug Style in Vehicle Heaters


Ordered 2 of these for the twin 5.9 Cummins engines in our boat. Installed them into a 3/4" NPT fitting in the head of each motor. Work great so far, keeps the motors just under 100 degrees. Makes starting much easier and almost no smoke out of either engine. 774783



- KH11405
by:

Review from a similar Frost Plug Style in Vehicle Heaters


Item works AS DESCRIBED -- added to my 2003 Subaru Outback wagon in 2019, kept the engine toasty during that winter 744524



- KH11419
by:

Review from a similar Frost Plug Style in Vehicle Heaters


Great product at a great price and fast and affordable shipping to!!! I will order from them again. 736711



- KH11419
by:

Review from a similar Frost Plug Style in Vehicle Heaters


Very good product After tree months still working 736484


27
52
Show More Reviews

Ask the Experts about this Kats Heaters Vehicle Heaters




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality vehicle heaters for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate vehicle heater information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Installed by:
Jeff D
Updated by:
Shelly K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.