Radial tire with automotive-grade tread has 8-ply rating and 2,150-lb max load at 65 psi. Acrylic enamel finish resists damage. Complimentary roadside assistance included. Assembly is match mounted and balanced providing longevity and a smooth ride.
Features:
Specs:
Platinum Plus Warranty with Roadside Assistance
This tire-and-wheel assembly comes with a Platinum Plus warranty that includes complimentary roadside assistance for 2 years. If your trailer has a flat tire, call the help line and a technician will come change out the flat tire with your existing inflated spare tire. The service is available 24 hours a day, 7 days a week. In addition to the roadside assistance, this warranty also includes other benefits and services.
Durable Acrylic Enamel Finish
This wheel has a durable acrylic enamel finish on the front. The finish is applied after the wheel goes through an environmentally safe zinc phosphate pre-treatment and is coated with an e-coat primer layer. Compared to powder coat finishes, this finish resists getting chipped from flying road debris or scraped from hitting a curb for a longer period of time. These acrylic enamel wheels performed for more than 1,000 hours in salt spray tests.
The automotive-rated center disc is raised and the stud holes are beveled and uncoated for better clamp force retention. This technology helps the wheel stay tight against your hub without the need for constant retightening.
Unlike standard trailer tire tread, which has solid, continuous ribs, the automotive-grade tread on these Provider radials has ribs with breaks. These breaks allow water to run off to the sides. The Provider tread also has sipes. Siping is a process in which thin grooves (or sipes) are cut into the rubber of the tire. The grooves channel water away from the tread so that the tire makes better contact with the road. Both of these features greatly improve traction during wet, snowy, or icy conditions.
In an ideal world, tire-and-wheel assemblies would be perfectly round and even throughout. Unfortunately tires and wheels have imperfections that often cause vibrations, resulting in a rough ride and wear and tear on the assemblies, as well as on the rest of your trailer's running gear. Taskmaster helps to solve this problem by match mounting and balancing their assemblies so they're ready to roll when they reach your door.
To do this, Taskmaster uses a laser-guided machine to locate the heavy and light spots of each assembly. They then align the assembly so that lightest part of the tire is near the heaviest part of the wheel. The assembly is then rotated at high speeds to pinpoint the optimal place to apply weights to further balance the tire.
Don't delay your adventures by having to take your trailer to the shop for new tires. Start rolling as soon as possible with easy-to-install, fully balanced tire-and-wheel assemblies from Taskmaster.
Provider radials are constructed with double polyester cords and double steel belts for increased durability and endurance. A protective layer of nylon is wrapped around the steel belts to help prevent tread separation. Provider radials are bake tested - a process usually reserved for automotive tires - to ensure that the rubber holds up over time.
Radial ply tires are designed for trailers that are towed on the highway. The cords on a radial tire are positioned at a 90-degree angle to the direction of travel so that they lay across the width of the tire from wheel lip to wheel lip. This construction prevents the cords from rubbing against one another when the tire flexes, unlike the cords on a bias ply tire. As a result, radial tires have less rolling resistance and heat buildup, which leads to a longer tread life and improved steering at higher speeds.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
All arrived in good condition. I was pleased that the wheels were balanced although it didn't appear that way on your website. These 81 mph-rated tires are being used to upgrade 8" tires on a small trailer to haul a Cushman Eagle at Interstate speeds
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.