4-1/2" x 4-3/4". Waterproof, dual-face light serves 5 functions: stop, turn, tail, parking, side marker, reflector. Front-facing amber lens and rear-facing red lens. Durable die-cast steel housing. Single post mount. 3-Wire design.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Pedestal mount trailer lights install standing up from the mounting point. And mounting hardware, typically one or two bolts, is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be reviewing part number STL53ARPB. This is the dual-faced red and amber post-mounted LED light for the right-hand side of your trailer. It's going to feature the dual face design. This is for the passenger side trailer light. The red side is going to serve three functions, such as your stop, turn and tail light and the amber side is going to serve two functions, such as your park light and rear turn signal light. It's also going to feature the built-in amber side marker light with the Reflex reflector. This unit's going to feature the long-lasting LEDs that are great replacements for incandescent lights.
They're going to feature a multi-diode design that's going to optimize your light output. You don't have to worry about replacing any bulbs and you don't have to worry about any brittle filaments. The LED system is going to be more efficient, which means it's going to provide a brighter light while using less power. It does have a corrosion-resistant design when it comes to the construction of the housing. Here at the bottom of the post you can see that it's going to expose a three-wire design. It's going to include your red wire for your stop and turn signal, your black wire, which is basically just your power lead, and then your white wire, which is going to be your ground wire and it has a little ring terminal on there.
That way you can attach it to any surface. This is Department of Transportation-compliant, so it meets FMVSS108 requirements in any 360-degree position. It's a nice square light. If we take a look at the overall measurements, it's going to give us a measurement of 4 1/2 inches wide by 4 1/2 inches tall. Now if we measure to the bottom of the housing, it's got a little lip down here, and it's going to extend our measurement to 4 3/4 inches tall. If we take a look at the depth, that's going to give us a measurement of about 2 and 1/4 of an inch. It's going to contain 42 total diodes, which are going to be the LED units.
That's going to be 21 LEDs per side. Here on the red side, the power draw for the stop signal is going to be 0.182 amps at 12.8 volts and for the tail light function, it's going to 0.012 amps at 12.8 volts. For the amber side, it's going to be 0.215 amps at 12.8 volts. Again, this is a pedestal mount installation. You're going to get the hardware that you need, so you're going to get a rubber flat washer, a regular flat washer. You're going to get a lock washer and you're going to get the nut.
The length of that pedestal is going to measure right at 2 inches. We're going to go and hook it up to our external power source. That way you can see what it looks like with power running to it, and with our overhead lights turned off. We're going to go ahead and make the ground connection which, again, is just the white wire. Then we'll connect the power lead, the black wire, and the stop and turn signal with the red wire. That power lead is just going to provide the power to the tail light function. You can see here it's going to send out a nice consistent LED signal. You've got the side marker light there and then you have the amber side as well. Really, I guess you're going to have 21 diodes per side and it looks like you're going have three for the side marker. Here on the red side, again, this side's going to provide three functions. You're going to have the tail light function, you're going to have your stop function. You can see how that illuminates for a brighter signal, and you're going to have the turn signal function. Here on the amber side you can see there that when we apply the turn signals, it's going to light up as well. The LED system is going to provide a nice consistent light and a very quick response time. That's going to do it for today's review of part number STL53ARPB. This is the dual-faced red and amber post-mount LED light for the right-hand side of your trailer. .
High quality!
Better than they looked in the pitcher
Good
Works exactly as intended!
love the product this is the 2nd set we have bought. highly recommend both product and company
they show up very bright even in the day time. very easy to installe and hook up.
I was very satisfied with the product.
product was delivered in a timely fashion quality appears to be good but haven't had time to install
works great. Again I installed these on a 1945 studebaker pickup
Actually mounted these on a kubota tractor to replace the plastic ones that were OEM. These are awesome! Bright , very durable. It was a great upgrade!
1 year in and they work great. I am very satisfied.
Came on time. Quality good. Nice and bright. Thanks, E-Trailer.
Very impressed. Very attractive. High Quality product. I wanted a metal fixture and I finally found it with your company and the myriad of products you let me choose from. Thank you.
These wired up very easily, work great ,and are extremely bright . The frame is metal and not plastic but they still cost way too much for LEDs
The led lights are bright ,a
Work well . Service and delivery was fast ; and the product was a good value. etrailer has served me well over the years I have been doing business with them. I would recommend them to anyone.
This light has 2 intensities (3 wires). The HIGH intensity is very bright and will be excellent for an amber dust light on the rear of my off-road buggy, which is why I bought it. The LOW intensity is not nearly as bright. Not quite sure what it's for - perhaps a parking light?
I RECENTLY BUILT A CUSTOM TRIKE. THIS LIGHT WORKED
PERFECTLY WITH THE TWO SIDES. I MOUNTED THE LIGHT HIGH SO IT WORKED AS A REAR AS WELL AS A FRONT TURN SIGNAL. THE LED AND THE CHROME MAKES IT LOOK VERY NICE FOR
CUSTOM VEHICLES. JUST WISHED THEY WOULD MAKE A SINGLE FACED ALSO.
I I am very pleased with these lights. I installed then on my travel trailer as side markers. They are very bright, and I see them just fine in the rear-view mirror.
Product received after proper mailing time by USPS; less than 7 days. The product purchased, two trailer lights, look to be very high quality. Inside the box: the two lights and nothing more. Great email updates while the product was ordered and then shipped. A very nice follow-up email arrived the day after delivery. Very happy to post a positive response.
We love them. They got wet when we put the boat in the water several times & they ARE waterproof! Love the bright LED lights (which are so much brighter that the old lights) & the wiring matched both our tow vehicles! They were a little pricey but in reality, you get what you pay for. These are high quality lights. Thanks!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.