What is the Diameter of the Mounting Post of the Dual-Face LED Optronics Light # STL53ARPB
Updated 05/06/2013 | Published 05/03/2013 >
Question:
Would you tell me the thread size of round metal post. Also there are three wires, what would I hook them up to? Thanks
asked by: Samuel S
0
Expert Reply:
The thread diameter of the mounting post on the Dual-Face LED Optronics Light # STL53ARPB is 1/2 inch. I spoke to my contact at Optronics to confirm this.
The white wire is the ground wire, the black wire will be the tail light circuit and the red wire will be the stop/turn circuit.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dual-Face LED Trailer Light - 5 Function - 42 Diodes - Square - Red/Amber Lens - Passenger Side
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- Marker
- Square
- Pedestal Mount
- Non-Submersible Lights
- LED Light
- 4-1/2L x 4-1/2W Inch
- Amber
- Red
- Optronics
more information >
Continue Researching
- Q&A: Availability of LED Post Mount Stop/Turn/Taillight for Headache Rack
- Q&A: Troubleshooting Amber Light on Optronics Dual-Face LED Light # STL53ARPB
- Q&A: How To Wire Light Bar On Trailer With Switch In Vehicle
- Q&A: Will Ball Mount Adapter Work With Weight Distribution Shank
- Q&A: Recommended 12-Volt Powered Light and Cord for Trailer During Loading and Unloading
- Q&A: Can 4-Flat Plug Be Cut Off Of Blue Ox Plug-In Tow Bar Wiring Kit BLU92HR
- Article: How Level Should a Tow Bar Be When Flat Towing
- Q&A: How to Run a Charge Line to a 4-Way Connector
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit

