Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11276
Our Price: $154.67
Confirmed to Fit
2013 Toyota Prius
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (445)
- Q & A (0)
- Photos
2013 Toyota Prius - Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Class I
- 1-1/4 Inch Hitch
- 2000
- Visible Cross Tube
- CURT
- 200
- Custom Fit Hitch
Perfect for light-duty towing, this custom, Toyota Prius trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11276 Curt Class 1 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.
Tongue Weight (TW):
200 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
2,000 lbs.
Tongue Weight (TW):
200 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
No drilling required for installation , Exhaust must be temporarily lowered for installation
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11276
Average Customer Rating: 4.8 out of 5 stars (445 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Ezekiel A.10/13/2015
2014 ToyotaPrius
I purchase two different products and installed both, back to back. I did not use a jack or a lift, so it took about 45 minutes to finesse this one into/onto my Toyota Prius. I needed a helper (wife) which made it much easier. This is for a bike rack. Ordered Friday and delivered Monday, fast, fast. Thank you.
by: Diana06/30/2018
2013ToyotaPrius
Love it! This trailer hitch allows an upright bike rack to attach, with the addition of an adapter, to our hatchback style Prius. It is much sturdier than our old bike rack that leaned against the hatch window. The trailer hitch/bike rack combo allows us to get into the hatch without removing the rack. We travelled across Florida and back, 300 miles, with no problems. Your website was very helpful in determining the proper hitch and installation was easy. Thank you for a great product at a good price.
Diana
6/30/2019
Still great! Thanks for following up. Not many companies do that. Great customer service.
by: A. W.05/23/2020
I bought this hitch after watching the online videos by etrailer detailing the installation. They make it look a lot easier to install than my experience, but i was not using a lift and had never done it before. The price on this hitch was very good and it was shipped very quickly. It beat the tools that I ordered from another online retailer to do the install, in fact. The packaging was good as well, and protected the hitch. I included a picture of my installation, which admittedly does not show very much, but its a win for me. The hardest part of installation was dealing with the exhaust bracket. I plan on purchasing a bike rack and a cargo rack in the near future, maybe even a small trailer.
A. W.
5/24/2021
After a year there has been absolutely no problems with the hitch. My plans of cargo racks and trailers were derailed due to the crazy year 2020, but I did purchase an Allen Sports 2-Bike Hitch Rack. The hitch holds the very heavy bike rack heavier loaded very securely with little to no wobble just using the locking hitch pin I also bought. I have no complaints about the hitch.
by: Victor Y08/18/2014
2010 ToyotaPrius
I installed it in 15 minutes with good video and instructions that are provided. Mounting tabs lined up perfectly to OEM holes using their upgraded bolts and washers.
Received it in 3 days after they sent me shipping confirmation and tracking number.
They should tape foam on the mounting tabs to prevent damage and puncturing through the box.
I like how it tucks up and hardly noticeable.
John
5/18/2015
is this a lowered prius?
Sundeep
8/1/2015
Hey Victor, were you able to do it at home or did you need a raised platform?
Victor Y.
8/4/2015
John it is not a lowered Prius, but with the tucked-up hitch, it gives it that look.
Victor Y.
8/4/2015
Sundeep I did it at work in the parking lot, I use the box to set the hitch on then pushed it under the rear and held it up with one arm while the other was threading in their supplied bolts.
by: William08/12/2020
2015 ToyotaPrius
Super easy to install and did it in about 45 mins without lifting the vehicle. Don't recommend that but show's you how simple both the hitch design and the Prius (2015) design is. Instructions provided is simple to follow and video links on the website helped.
William L.
8/25/2021
Thumbs up! Use it fairly regularly. Still recommend
by: Matthew 11/24/2023
2012 ToyotaPrius
Installs easily and fits as advertised. I had the 2” receiver first and it was not possible to install in my 2012 Prius. Stick to the 1.25 and you’ll be set.
by: Charles 01/13/2024
Great customer service and very timely delivery. Clean and easy installation.
by: Steve 10/15/2023
Everything fit as advertised without any alterations. It appears strong and handled my bike rack for Ebikes just fine. Good company to work with.
by: Bruce 05/23/2024
The videos and printed instructions were a great help. The receiver fit my 2012 Prius perfectly, I mounted the Thule bike rack, my bike, and rolled down the Interstate rock steady.
I will recommend eTrailer to my fellow bike clubbers.
by: Annette 10/13/2023
2013ToyotaPrius
Etrailer pointed me to the correct hitch for my vehicle. The hitch arrived very quickly. I used Etrailer recommended installer ABG Fabrication and Jim and his crew were awesome. This hitch works perfectly for the bike rack on my 2013 prius. A very good experience all the way around! Thank you etrailer & ABG!
by: Tanner D.03/16/2020
After using this custom fit trailer hitch reciever for one year, I am loving it! It was easy to install and it has done exactly what I needed it to do and more! I also bought my vehicle specific trailer light wiring harness which was easy to install as well and continues to work great! I would definitely recommend both of these products!
by: Vince B.07/17/2020
The hitch is great. Super strong and it has never loosened or worried me driving with a loaded bike rack on many miles of dirt and gravel roads. Highly recommend upgrading to a hitch if you were previously using a clip-on roof rack like me to carry bikes, which can be shaken loose on rough roads or high winds. Installation was straight forward after you find the right bolts to take out.
by: KDS02/19/2022
The service from eTrailer and the price is always the best around. This is the fifth hitch I have ordered from them and it has always been a great experience. The only issue I have had is that two of the hitches got dropped in shipping and bent. Unfortunately you can't tell it until the bolt holes don't line up under the car. In both cases I was able to simply use a floor jack to spread the ends back the 1/4 inch needed, but it just adds some annoyance. I love eTrailer prices and their service!
by: John B., not the sloop09/30/2015
2010 ToyotaPrius
First, let's make a comment on etrailer's service. I placed my order at 4:40 am. The item was shipped at 7:30 am. UPS attempted delivery the next day mid-morning. What would expedited service look like?!!
The Curt hitch is excellent quality. It took a little longer to install than anticipated, but once in it is great looking and very sturdy. The knuckle of the hitch sticks out about an inch to two inches beyond the bumper of my 2010 Toyota Prius. A couple of pictures are attached.
by: Peter03/21/2019
2015 ToyotaPrius
Purchased this for my "new" 2015 Prius and I'm very pleased by how easy it was to install and how nice it looks. My primary need for a hitch is to carry a bike rack, but I also have a small utility trailer that has been very handy when I need to carry a bulky load that won't fit in the Prius even when it's not all that heavy.
I had previously installed a Curt hitch on my 2009 Prius and had a bit of a problem where the bolt holes didn't quite line up (even though it was only off by 1/8 of an inch or so, it was a lot of work to "stretch" it by even that much to fit. So, I wasn't quite sure what to expect this time. But it turned out to be no problem at all - the holes lined up perfectly, making the installation quick and easy.
A few tips:
1) When removing the tow hook from the drivers side, make sure to carefully remove the bolt and socket driver. If you don't, they can fall down and get caught on the top side plastic underbody panel. That turned what would have been about a 30 minute job into a 60 minute one!
2) The video was very helpful. The installer in the video suggested putting some spray lubricant on the exhaust hanger to help get it back on. I initially found it impossible to remove, even with lots of effort to point that I as worried about damaging it. But a quick shot of silicon lubricant worked wonders - it slid right off to all access to the bolts, and the slid back on easily as well.
3) Be sure to use a torque wrench as described in the installation instructions. I had to torque it down a lot tighter than I would have guessed without the torque wrench.
by: jeff08/11/2020
This hitch appears to be a much higher quality hitch/receiver than the U Haul one I bought for my minivan several years ago. I had some help with the installation with auto-tech students from where I teach because it is much easier to install it from a lift. If you are handy, you might be able to install it yourself using jack stands.
by: Diana06/08/2019
2013 Toyota Prius Plug-in Hybrid
I’m super excited to use the hitch I just got. The installation went fairly smooth with a big help from the video. It took less than an hour for the 2 guys who were helping me. I’m not sure I could have done it alone. The hardest part seemed like attaching the hitch on the passenger side because of the exhaust. The spec for this product says to torque it to 86 lbs. I hope that is enough to carry the load it is manufactured to claim. The hitch looks great and hangs as it should but I hope it’s not to low since I am already scraping the bottom of my car on shitty Bay Area roads. I like how it doesn’t stick out past the bumper much at all so I won’t knock my shins.
by: Michael07/05/2019
Such a easy install it took me only 20mins from the ground I did back both rear wheels on a bricks to give me more room underneath to install the hitch I recommend lubricant on bolts and muffler hanger, I didn’t have a breaker bar so I used a wheel lug t bar and used the 3/4 side to just loosen it then came back with 19mm ratchet and loosen and tightened it all up and torqued to spec , It’s really simple I watched the curt video install on you tube once and understood it . Im glad I chose the Curt because it was so simple to install great product I recommend buying from etrailer vs eleswhere online...my receiver hitch was delivered well packed with no problems I’ve heard complaints from other websites that delivery was received damaged or bent so the bold won’t line up . Do yourself a solid and go to etrailer you won’t regret it.
by: Jimmy 04/17/2024
High quality hitch
by: WA6TT07/15/2012
2011 ToyotaPrius
It took over 2 hours for install for 2 reasons. First, the tools would not fit around the exhaust system and in the access slot. 3/4 drive equipment was too bulky. Second reason, an Important issue, the heat shield on my 2011 prius extends further aft than the video and to fit the rightside bracket correctly, the bracket must be sandwiched between the shield and the frame. It took alot of time bending the shield to get the bracket installed. The video is wrong, they just clamp on top of the shield and squeeze it against the frame. You don't want heat to transfer to the vehicle because the 12-volt battery is located in that area.
by: Betty05/12/2020
I ordered a trailer hitch for my Prius v. It came in a timely manner and well packaged. It was relatively easy to install. The instructions were unclear on removing a rubber holder for the exhaust, but I managed to install it without removing the rubber holder. I’m happy to have a hitch for my bike rack on my new (to me) car.
by: Michael11/02/2018
2015 ToyotaPrius
I tried to install the hitch today but could not as per the instructions. The tow hook does not line up with the hitch, see pictures. I ended up installing without the hook but that is not how it should be. Please advice
Heather A.
11/2/2018
The tow hook is removed for installation of the Curt hitch part # C11276 hitch on a 2015 Toyota Prius. Where the tow hook is located will have two bolts. Remove those two bolts and the tow hook. The two hooks will be replaced by the hitch. I have attached a video on a 2015 Toyota Prius for your reference.
Helpful Links
by: Vernon08/28/2017
ToyotaPrius
I highly recommend etrailer hitch and wiring harness They were both easy to install. The Prius pull the motorcycle camping trailer very well. You would not even know it was hooked to the car
by: Jo05/23/2018
2015 ToyotaPrius
Perfect fit, thanks for your user-friendly website! And thanks for the timely delivery also.
The Curt hitch was easily installed by a local shop that has installed "hundreds" of these on local Priuses.
The cargo carrier was pretty simple for this gal to assemble, but would have been even easier if I'd have had a good wrench and another person to assist. It's very sturdy and will be very useful.
by: Fred02/25/2015
2010 ToyotaPrius
For a 2010 Prius
Very well crafted. It is a bit heavier than the other Hitch Receivers on the site, but looks way better. Everything was packaged nicely and came as promised.
Install wasn't bad either. I'm slender and fit underneath the car without car ramps and jacks. Just cut out a side of cardboard from the provided box and slide under. At around 45 lb. it's a bit tricky to hold up on your own. So a few house items to prop it up fixed that. 30min install time. MAKE SURE you have 17mm & 19mm DEEP Sockets and 6" extender.
25
447
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Hitch Pin Hole Size of Curt Trailer Hitch Receiver 11276You are correct about the hitch pin hole size of the Class I Curt Trailer Hitch Receiver # C11276 being 1/2 of an inch. This is true of all trailer hitches that have a 1-1/4 inch receiver like this hitch does. I have added a link to the directions, as well as some video installs for you to check out of the Curt Trailer Hitch Receiver # C11276.
view full answer... - Thule T2 Bike Rack with Hitch Adapter on Class I Hitch on 2012 Toyota PriusWhen using a hitch adapter, like part # HTAD, to use a 2 inch accessory in a Class I hitch the capacity of the hitch is reduced by 50 percent because of the added leverage from the weight of the bike rack and bikes being extended farther away from the rear of the vehicle. In your case 107 pounds will exceed 50 percent of the 200 pound capacity of any trailer hitch, like the hitch your referenced, # C11276, available for your 2012 Toyota Prius. Your best option for carrying 2 bikes would...
view full answer... - How Many of the Curt Stabilization Straps Are Required with a Trailer Hitch Mount Cargo CarrierFirst, check your vehicle owners manual to make sure it is permissible to use a trailer hitch mount cargo carrier on your 2013 Toyota Prius V. You only need 1 strap, # 18050, to be within the warranty requirements for Curt trailer hitch # C11276. I have included a link to a video showing a typical use of the strap. If you wanted you could use more than 1 strap. But you will need to use at least 1 for non-trailer loads.
view full answer... - Best Single Bike Rack for Road Trips on a 2010 Toyota PriusI myself drive a Prius and use it for long road trips! For the best experience, she's going to want a hitch-mounted bike rack. For that, she'll need a hitch. The Curt Trailer Hitch # C11276 is a quick and easy option. Just note that it has an 1-1/4" receiver size. We also have some good trunk mounted bike racks, but for long-term use, we like to recommend a hitch bike rack first. Next for the bike rack. I have two really good options. The first is the Kuat Transfer V2 # KU64FR. This is...
view full answer... - Will Curt Trailer Hitch Receiver C120912 Fit A 2014 Toyota Prius Two?I have another option for you, but the Curt Trailer Hitch Receiver w/ Euro Style Draw Bar # C12091 is only confirmed to fit select Ford Fusions and Lincoln MKZ and will not fit your 2014 Toyota Prius Two. Instead I recommend the Curt Trailer Hitch Receiver # C11276 which is confirmed to fit your 2014 Toyota Prius Two. This hitch has a 200lb tongue weight rating and 2000lb trailer weight rating making it a perfect option for carrying a bike rack, cargo carrier, or drawbar for light duty...
view full answer... - Recommended Trailer Hitch Receiver and Vehicle Wiring Harness For a 2013 Toyota Prius C? I recommend the EcoHitch Hidden Trailer Hitch Receiver # 306-X7194 for your 2013 Toyota Prius C. The Curt # C11276 you found will not fit your particular Prius C. The EcoHitch has the larger 2" receiver allowing for a much larger selection of hitch mounted accessories. It is best to install the Curt T-Connector Vehicle Wiring Harness # C56275 when you install the receiver. This will give you a 4-way flat connector. This is the most common connector used on small trailers you might tow....
view full answer... - Trailer Hitch Ball Shank Size and Use of Hitch Adaptrers on a 2010 Toyota PriusClass 1 receiver hitches use a 3/4 inch ball shank size. I would recommend item # 19256, for a 1-7/8 inch ball for your hitch or the item # 19258, 2 inch ball. 1-1/4 inch to 2 inch Trailer Hitch adapters like the Hitch Adapter 1-1/4 inch to 2 inch Trailer Hitch Receiver, item # HTAD, are not to be used for towing because the use of an adapter significantly reduces the tongue capacity of the trailer hitch and puts excess stress on the hitch if used for towing due to the extended length...
view full answer... - Trailer Hitch for 2018 Toyota Prius for Carrying Bike RackThe best hitch for a bike rack and ground clearance for your 2018 Toyota Prius would be the Curt part # C11473. Curt hitches are generally the highest quality which is why we recommend them the highest.
view full answer... - Comparing Trailer Hitches that Fit a 2017 Toyota Prius vWe currently carry four trailer hitch receivers that fit your 2017 Toyota Prius v and the best one for you depends on what you're using it for. For example, the EcoHitch, part # 306-X7192, is the best option if you're going to be using the hitch to carry a cargo carrier or bike rack because the hitch pin hole sits closer to the rear bumper so whatever is in the hitch has a higher chance of clearing the bumper. It's also the only one that's a 2 inch receiver and there are more hitch accessories...
view full answer...
- How to Carry Electric Bikes With 2010 Toyota Prius & 2018 Kia SoulOk, we can get either your 2010 Toyota Prius or 2018 Kia Soul set up to carry electric bikes, but you are correct that there isn't an option for a Class II, 1-1/4 inch hitch for either vehicle. That said, you can still carry your electric bikes, and to do so you have a couple of options. One is to use the Hollywood rack with a 2 inch EcoHitch trailer hitch, OR you can use a different bike rack compatible with the available Class I, 1-1/4 inch hitches. I'll go ahead and list out the options...
view full answer... - Parts Needed to Install Hitch-Mount Bike Rack on 2014 Toyota Prius Plug-In HybridI have included for you a link to our main page for all Class I-compatible 2-bike racks; these are available in several styles (hanging or platform) and also with feature such as tilting capability and built-in locks. You can use the filters in the left-hand margin to narrow the product results shown to just those with the features you prefer. The linked articles will help you consider which racks will best serve your needs and the particular bikes you wish to transport. One of the most...
view full answer... - Trailer Hitch Recommendation for a 2015 Toyota Prius VI checked with Curt and the hitch part # C11276 has been confirmed as a fit for your 2015 Toyota Prius V so I would recommend it for you. I attached an install video for this hitch for you to check out as well.
view full answer... - Trailer Hitch and Wiring for a 2014 Ford FusionCurt trailer hitch # C11276 fits various years and models of the Toyota Prius and cannot be installed on your 2014 Ford Fusion. Hitches are custom fit to the vehicles they are designed for so for your 2014 Ford Fusion you would need hitch # C12091 for a comparable Curt hitch. Please note this hitch will not fit Titanium models. This hitch uses 1/2"-13 x 1-1/2 grade 8 carriage bolts. I have linked a video showing how it installs. If you will be doing some light duty towing then the correct...
view full answer... - Hitch Recommend for Carrying Bike Rack on 2016 Toyota Prius V Does Not Require Stabilizer StrapThe ideal solution for carrying the Swagman Titan 2 Bike Rack for 1-1/4" and 2" Hitches # S63400 with your 2016 Toyota Prius V is to use a trailer hitch that does not have the stabilizer strap requirement. For that the Draw Tite part # 24847 would be perfect. If you already have the Curt # C11276 which does have this requirement you will need the strap part # 18050. You would have to run the strap above the spoiler to the hatch door seam.
view full answer... - Is a Trailer Hitch Easy to Remove from a 2013 Toyota Prius that was in an AccidentYou have to be careful because if the vehicle was in an accident the hitch could also be damaged even if it does not appear to be. I recommend going with a new hitch. Removal of the hitches for the 2013 Toyota Prius is easy since it just directly to the frame. You would just remove the hardware and pull off the hitch. If you are able to determine that the hitch is still fine, not damaged, then if you reuse it you will need to replace the hardware with # RHK. The hardware is meant to...
view full answer... - Replacement Mounting Hardware for Curt Trailer Hitch Receiver on 2014 Toyota PriusYes, the replacement hardware for your Curt Trailer Hitch Receiver # C11276 is found as part # RHK on our site. You'll just need to select Curt from the manufacturer drop down menu and type in your hitch number (C11276) and we'll send you the correct hardware! Current pricing can be found on the product page.
view full answer... - Concealed Style Class I Hitch Recommended for 2014 Toyota Prius VFor a 1-1/4 inch Class I hitch with a concealed crossbar like the Class III EcoHitch # 306-X7192 you'd looked at, I'd recommend the Draw-Tite # 24967. As you can see from the provided photo, the only portion of the hitch visible from the rear is the receiver tube and the safety chain loops. The remained of the hitch is concealed behind the rear bumper and fascia. When we installed the hitch on a 2016 Prius V, we found that when installed, the hitch pin hole in the receiver tube was recessed...
view full answer...
- Weight Capacity of a Trailer Hitch Receiver for a 2014 Toyota Prius VThere are several fits for the vehicle if you're looking to install a hitch for extremely light duty work like a two bike rack or a small cargo carrier. You'll want to check with your owner's manual or manufacturer to confirm your actual weight capacity. I recommend the Curt Class I, part # C11276. This is rated for 200 pounds tongue weight. Again, verify the actual limits with your manufacturer or owner's manual. I've included our help article about trailer hitch installs, as well as...
view full answer... - How to Correct for Tilt in Hitch-Mounted Platform Style Bike Carrier in Class I Hitch on Prius VIf the issue is that your Kuat Sherpa Hitch bike rack # SH12G when installed in your Prius' hitch tips to one side, you might try loading the bikes facing in opposite directions. Some bikes can be heavier towards the front or rear and so loading them facing each other can sometimes help to even out the weight distribution between the driver and passenger sides. You might also check your hitch receiver tube to see if it is bent or distorted. One of the two hitches offered for your car,...
view full answer... - Will the Curt Class-I Trailer Hitch Fit a 2012 Toyota Prius Plug-In VersionYes, the Curt Class-I trailer hitch # C11276 will fit your 2012 Toyota Prius just fine. It has a maximum tongue weight of 200 pounds but I would still double-check your owners manual to confirm the maximum tongue weight on your Prius. Please note that all non-trailer loads such as bike racks, cargo carriers and so forth - should be supported with stabilizing straps like # 18050. Failure to properly support these loads will void your hitch warranty from Curt. I included a couple installation...
view full answer... - Can a Yakima Bike rack for a Class II Hitch Fit in a Curt Class I Hitch on a 2014 Toyota PriusCurt Class I trailer hitches do not have that stop in them. That stop is there to prevent accidental overloading of a Class I hitch. It allows only Class I compatible accessories to be used. In terms of bike racks a Class I hitch is only rated for a maximum of 2 bikes. The reason isn't the weight but rather how far that weight is from the receiver. A third or more bikes will create too much leverage on the hitch receiver and can damage it and the vehicle. I have actually seen it happen;...
view full answer... - 2017 Toyota Prius Hatchback Class I Trailer Hitch I'm not familiar with the Prius 2, but the Curt Class I hitch part # C11276 would be compatible with a 2017 Prius V. For the 2017 model year, Toyota offered 4 different Prius models, the Prius, Prius C, Prius Prime and Prius V. They all use different hitches for the most part, except for the Prius and Prius Prime. For the Prius or Prius Prime, I'd recommend the Draw-Tite Class I hitch, part # 24966. Installation would involve temporarily removing the rear bumper cover, but since you're...
view full answer... - Which Hitch Will Fit a 2015 Toyota Prius FourI was able to confirm with my contact over at Curt that the Curt # C11276 will fit on the 2015 Prius Four that you've got; it's really just a sub-model of the Prius and he was able to confirm through their internal fit guide that this hitch will fit this vehicle as well. For a ball mount you'll want to use the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521, which requires a hitch ball with a 3/4" diameter like the # 19258 (2" hitch ball) or # 19256 (1-7/8"...
view full answer... - Installation Of Trailer Hitch On 2013 Toyota Prius Plug-In HybridAt this time, the only trailer hitch listed as a fit for the 2013 Toyota Prius Plug-in Hybrid is the Curt Class I Trailer Hitch, # C11276. The Draw-Tite and Hidden Hitch trailer hitches have not been confirmed to fit your vehicle. The Curt hitch is very similar to the Draw-Tite and Hidden Hitch trailer hitches. The only significant difference is that Curt's warranty requires the use of a stabilization strap, like part # 18050, for all non-trailer loads such as bike racks or cargo carriers. If...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Robert C
Edited by:
Dan D
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Andrew K
Video by:
Jonathan Y
Written by:
Lindsey S
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ezekiel A.
10/12/2016
It has performed as my intended use. I have only used this for attaching a bicycle rack and holding 2 bicycles.