Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your Ford Edge's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Heat shield must be modified or trimmed for hitch installation. Drilling through vehicle frame required for installation , Exhaust must be temporarily lowered for installation , Fascia trimming required for installation , We recommend that all non-trailer loads (bike racks, cargo carriers, etc) should be supported by stabilizing straps, such as 18050, sold separately
Complete Towing Package for 2012 Ford Edge
Popular Edge Trailer Hitch Accessories
A good product I'm very happy with it
Ordered a hitch had it two days later good customer service.
looks like it will work great. It will be installed at the end of Oct.
Thanks for the prompt delivery and all the emails notifying me of the status of my order. Hitch is beautiful highly recommended.
Easy time to install. and easy setup. Fast shipping. Installed the product in time quoted. Now have to figure out on what to pull.
Quick delivery. Easy install. Took longer than expected though, as I do not have a vehicle lift and spent this time on my back.
Love the instructional videos on the website was a big help.
Looks great. Now I just have to install the electrical harness 118551 and I will be ready to tow!! Thanks Etrailer.
I'm really happy with this hitch.
I have a 2011 Edge Sport and was initially concerned about how this would work out. I did not have to trim the fascia to install the hitch, as I just deflected the fascia upwards. With design of the center section having a non-shiny black texture with fins, it looks okay to have the gentle upwards curve in the middle. The rest of painted fascia is not deflected.
Best part is I can take off the hitch when I turn in my lease and have no damage to the facia
The hitch fit great...It will take longer if you have to have to do it on your back and not a lift....They say to use a 17/32nd drill bit but a 9/16th works a little better...Overall I am happy and I did order the light kit...THANKS AND i WILL ORDER WITH YOU AGAIN
This is the first Curt hitch I've installed; my experience is with other brands thus far. I was very impressed by the quality of most of the welds, the coating on the hitch, and the hardware kit. Additionally, fishing bolts through a frame is typically time consuming and frustrating - but the fish wire that came with this kit was simply awesome. The Ford Edge doesn't have a lot of space for a hitch, and thankfully the fit of the Curt hitch was excellent and provided around 3/8" - 1/2" clearance to the exhaust system. etrailer.com had the hitch on my doorstep 2 days after I ordered! Very impressed overall with the transaction and the product.
I'm sending you some pictures of the hitch installation on my 2011 Ford Edge
Hitch arrived on time and in good condition. The only trouble I had was determining which holes in the frame to pull the bolts through. I looked at the hitch and it appeared to me that the rear hole was offset and since there are three holes in each frame rail I assumed that the rear bolt went into the outer hole. WRONG. Both bolts go straight in line with each other, into the two holes in the frame that are closest to the muffler. Once I discovered that I had to move one bolt over about 3/4 of an inch into the correct hole but I was able to do it rather easily.
I used a floor jack to raise the hitch up into place which means I didn't need another person to help.
My only complaint was with the "etrailer.com" sticker on the back of the hitch. Whoever put it on must have been in a contest to see who could put it on the crookedest. I think he won. I'm going to peel it off because it really looks bad.
The hitch arrived with the light kit. The hitch was packaged very well with the light kit inside. The hitch was easy to install and looks like a professional installation. The most difficult part of the installation was routing the power wire from the battery, but after a little time it has worked flawlessly since the installation. I will most definitely recommend trailer to everyone I know.(See attached picture!)
James B.
6/6/2019
Hitch works great-the light kit works good as well. Was one of the easiest hitches to install! I will buy from you again when I need a hitch!
E Trailer is The Best. After watching a video it was so easy to install my hitch.
I also purchased a Trule bike rack and am very happy with it.
Richard S.
10/29/2017
Perfectly
This went it flawlessly. I was able to get it installed with the rear of the car on ramps. I did everything that the instructions suggested but I was able to get the hitch installed without dropping the entire exhaust. I disconnected the drivers side rubber hanger which gave me enough room to install it.
Mostly easy to install. The video and instructions are great until it came time to fish the carriage bolts (the reason for 4 stars instead of 5). The video shows fishing from the side of the frame rails which our 2012 is sealed off. There was a reviewer that recommended taking the tail lights, bumper cover, bumper off, that should be steps 2, 3 and 4 after dropping the muffler. You don't even need the fish wires with the bumper off. Although when replacing the bumper cover, pay more attention to the center anchor of the bumper cover than I did. All in all though, this was an easy install. If I had to do it again, with an extra set of hands, can be done easily in an hour ... the second time, without the wiring. Attached is a mostly complete installation.
Great solid construction and very appealing installed on our 2014 Edge. I've seen many other types of hitches in the road and by far this is the cleanest looking one. I did have to mount my plug adapter on an angle but feel it doesn't take away from attractiveness of hitch. Even after a year of regular use, has minuscule amount of rust just around where the ball mount attaches. clean it up a bit and touch it up with a little gloss paint and looks good as new. Would highly recommend this hitch to others.
Great product and support from etrailer. I ordered the hitch for my Lincoln MKX and installed it myself. I followed the etrailer video, took my time and had it installed in a few hours. No problem. Hitch is high quality and performing top notch. I also ordered and installed the blue-ox tow package, brake system and a wiring package on my MKX. All excellent. Highly recommended.
It's looking good shipping fast tanks
Great Price! Shipping was super fast. I ordered on Tuesday at 2pm and the hitch was sitting in my garage on Thursday by noon. Installation was easy thanks to the how to video on your site. I was a little apprehensive about having to lower my exhaust and drill two holes but it was smooth and easy. The fish wires to pull the bolts through the frame are genius and made an impossible task simple. The Curt hitch looks great on my 2010 Ford Edge. I towed my boat with it the next day and it was smooth sailing.
I was concerned about how this was going to fit on my 2013 Edge Sport, but it went in really well with a very minor trim on the lower plastic. I don't imagine it will ever be removed, so I went ahead and trimmed the plastic for it pushed it up a good 2 inches and I didn't want to risk deforming it elsewhere. It is a really a great hitch, installed easily, probably overkill for this vehicle, definitely a solid unit.
The install video for this hitch indicates that routing the carriage bolts through the end of the frame rail is easy. On my installation this was not the case at all, and was virtually impossible without removing the rear bumper cover and bumper itself. Once the taillights, bumper cover and bumper itself were removed the installation of the mounting bolts was very easy. I defiantly recommend having a second set of hands for installing the hitch to the bolts, and the use of a floor jack is also recommended. Once installed the hitch looks great and is very solid. Only 4 stars because this did not go as the video shows.
Everything fit nice. The only issue was the 17/32 drill bit required. [online] what were you thinking. That bit is so random and hard to find. I ended up using a 9/16 and didn't need to ream the hole. The zip ties were a friends idea, and it helped hold it in place while since it was only me and my 17yr old niece doing the install.
Great product for the do it yourselfer, installed in a Couple hours no problems at all. Another couple hours for the wiring harness, fit beautifully. I would highly recommend this product.
Ordered this product and installed in my garage with basic tools, by myself. The instructional videos online are spot on, to the point, and very easy to follow. Shipping and packing came as promised with no issues. I will for sure use this company and its products again.
Thank you
George
Just wanted to say thanks for the awesome site and service.
I just installed it on my ford 2010 edge and everything went smoothly. It took me about 1.5hrs to install. The exhaust was very easy. Getting the screws in were a bit trick especially the 3rd ones but manageable.
At the end it looked perfect. I got my sister to buy one for her Honda Odessey.
Thank u eTrailor ur videos were invaluable.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ben J.
8/22/2019
The paint still looks good and the hitch works like it should. Good sturdy hitch.