Replacement bolts for Curt Trailer Hitch on 2010 Ford Edge

Question

Question:

What size bolts are used on hitch C13067

asked by: Rick W

0

Expert Reply:

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13067 will use 1/2 inch 13 x 1-1/2 inch and 1/2 inch 13 x 1-3/4 inch carriage bolts. If you want the complete factory hardware kit use Replacement Hardware Kit for Trailer Hitches # RHK.

expert reply by: Jason S

0

click to enlarge

Answer 1

When installing a trailer hitch on a 2013 Ford Edge like the Curt part #C13067 the lower fascia does need to be trimmed as the fascia is different like you said. If you check out the picture I attached you'll see exactly how this is done.

view full answer...

Answer 2

The Curt hitch part #C13067 is actually a confirmed fit for both the Sport and Non-Sport models of the 2013 Ford Edge so it would work well for you. The heat shield will need to be trimmed, but since you don't have a Sport model the rear fascia…

view full answer...

Answer 3

After taking a look at the owner's manual for a 2011 Ford Edge, I found that the largest trailer that could be towed with this vehicle would be one weighing 3,500 lbs and this is only for the AWD 3.5L Class II (lower capacities are listed for the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 12

Hey Isaiah, thanks for reaching out! I recommend the etrailer Trailer Hitch Receiver #e98912 2025 Subaru Crosstrek simply because it has a matte black finish that offers a better look and protection over the glossy black finish we see on the other…

view full answer...

Replacement bolts for Curt Trailer Hitch on 2010 Ford Edge

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching