1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24933
lowest price pledge
Our Price: $141.10
You Save: $120.10
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 29 lbs
In Stock
24933 - Concealed Cross Tube Draw-Tite Trailer Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24933 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (11)
  • Q & A (24)
  • Videos (2)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24933

  • Draw-Tite
  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy square-tube design
  • Drawbar and pin and clip sold separately


  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

24933 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe - 1-1/4"

60371 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24933 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Video of Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Trailer Hitch Installation - 2016 Mazda CX-3

Today on our 2016 Mazda CX3, we're going to be taking a look at and installing the Draw Tite Class One Custom Fit Trailer Hitch Receiver. Part number 24933. This is what our hitch looks like fully installed. You are going to see a little bit of the cross bar right underneath the muffler, and you're going to have your receiver tube opening coming out right in the middle. Now this is a class one hitch, so it's going to be an inch and a quarter by and inch and a quarter receiver tube opening. Now this is going to use a standard half inch pinning clip. It is not included in the kit, but you can pick one up on our website using part number PC-2.

As far as the safety chain loops, they're going to be welded on the bottom here. It's a rolled steel stock. As you can see, you're going to have plenty of room getting any hook on or off without interfering with anything else. Now this hitch features a 200 pound tongue weight capacity and that's going to be the force pushing down. Now it also has a 2,000 pound gross trailer weight rating, which is the amount that it can pull. Now, I do want to mention you want to check with your vehicle's owner's manual to make sure that your vehicle can handle that capacity.

Now I'm going to give you a few measurements to help you in picking out accessories for your new hitch, such as a bike rack or a cargo carrier. From the center of the hitch pinhole to the outermost edge of the bumper is four and a quarter inches. From the ground to the top inside edge of the receiver tube is 11 and a quarter inches. Before we begin our installation, I'd like to go over the tools that you'll need to complete it. Now here we just have a 3/8th ratchet as well as a torque wrench, a 7/8th wrench, and a 17 millimeter wrench, as well as a 7/8th socket, a 17 millimeter deep well and short well socket, a universal adaptor for our 3/8th ratchet and torque wrench, a short three inch extension, a nine inch extension, and a small flat inaudible 00:02:02 screwdriver. Now that we've gone over some of these things, let's go ahead and show you how we get it installed. To begin our installation, we're going to need to lower our exhaust and we're going to have two rubber hangers on each side.

I'm just going to take some spray lubricant and spray them down to help get them off a little bit easier. Before we lower our exhaust, I'm going to put a strap to support it so it doesn't fall down all the way. We should be able to pry the rubber isolator off of the hanger. We're going to come right where out exhaust cutout is right here and we're going to go towards the front of the vehicle. You're going to have two studs with two nuts on them and we're going to be removing these two nuts on this side as well as on the other side of the vehicle. We're going to be using a 17 millimeter socket to take these off.

Then we're going to be keeping these nuts and reusing them later. So we're going to put them in a safe spot. We're going it repeat the same process on the other side. Next up in our installation if we come to our back bumper and we come underneath right behind the muffler, we're going to have a plastic panel right here and on either side we're going to have a pushpin clip. Now you can either use a trim panel tool remover or a flathead screwdriver, pop out the center section, and then come back and we'll release the outer portion and our clip will come out. Now if you come back to the panel underneath, right on the inside of where our clip came out, there's a tab. If you take a flathead screwdriver and just push in on that tab, it'll release the panel and let it come down. Now with our hitch being installed, we're not going to able to reinstall this panel, so we're going to give it back to the owner. Now with an extra set of hands we're going to get our hitch put in place, we're going to go over our exhaust. Now I do want to mention that this tab on the passenger's side needs to go to the outside of the factory tow hook. Then we're just going to use the studs that are existing in the bumper and reuse our factory hardware. We're just going to get those hand tight right now. Now this is going to be a little hard for you to see, if you can see at all, but we're just going to put all our fasteners, two on each side, and we're just going to get them hand-tight right now so the hitch will support itself. Next we're going to come to our factory tow hook here and we're going to take our carriage bolt along with our square hole spacer and we're going to insert the bolt into the spacer. Then we're going to take our round hole spacer and it's going to slide in between our hitch and our tow hook. We're going to line up the hole so that we can feed the carriage bolt through. Then we're going to come back with our conical toothed washer with the teeth facing the hitch and then come back with a nut. Now, with all of our hardware loosely in place, we can start to torque everything down to the specified amount in the instructions. Now when it comes to the four bolts, the two one each side, I did find it easier if I got a long extension, went right between the hitch and the exhaust cutout, and then had a swivel on the end of it. Again, I'm using a 17 millimeter socket. Now to make it easier to get into the bolt behind the fascia, on the outside bolts, you're going to want to use a shorter extension with the swivel in your socket. Now that we've got all our hardware torqued down, I'm going to go ahead and reinstall our mufflers and I'm just going to put a little bit of penetrating oil on the hangers here. Make it a little bit easier going in the rubber isolator. That'll finish up the look at the Draw Tite Custom Fit Trailer Hitch Receiver. Part number 24933 on our 2016 Mazda CX3.

Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24933

Average Customer Rating:  4.9 out of 5 stars   (11 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

- 24933
2018 Mazda CX-3

I purchased this hitch to support a Yakima bike rack. Delivery was quick and the online video was a great help with the installation! 524272

- 24933
2018 Mazda CX-3

The trailer hitch for my Mazda CX-3 was delivered exactly as indicated. I was able to have it installed the following day. It will be used for my bike rack and a local U-Haul store was able to find which hitch was needed by using this website. 497341

- 24933
2016 Mazda CX-3

LOVE that you do this. Very smart! The products worked great. I will say that install was super tricky due to the super tight space on the inside of the bumper. So any insights to help folks like me best navigate install is the only potential improvement I can think of. Other than that...awesome in all other respects. Love the quality and the customer service to date. So thanks for running a good business guys! 497168

- 24933
2016 Mazda CX-3

Overall the install went really well. it was a little tight but using different extensions worked. you will need the deep 17 socket. makes it much easier. I did not have to leave any trim pieces off either. I watched the video first which was a big help. I back the car up on the ramps and there was plenty of room to work. 561918

- 24933
2018 Mazda CX-3

The order process was easy and the video on the web page, along with the pdf file downloaded installation instructions made the install a breeze for my mechanic. FYI, we ordered this hitch for a 2019 CX-3 and it fit perfectly. Customer service was great too, as I received several emails confirming my order and a follow up email. 545230

- 24933
2017 Mazda CX-3

Solid product. I feel safe using this for carrying my bike. 800999

- 24933

Still a great hitch! 1 yr later been used many times and is still hanging on pretty well! 665566

- 24933

Jameson and Donna P. were very helpful with my order. An item was out of stock and Donna quickly noticed this and ordered it directly from the manufacturer and updated my delivery date and my shipping address. Everything arrived on time and that was appreciated. Jameson answered my initial concerns and explained in detail what I would need to complete the job. Thanks to both and etrailer. I never realized there was so much to learn about towing a trailer, but they made it easy to learn. 403175

- 24933

Quick shipped, installed on my CX-3 in about 30mins. Looks good, works great for my bike rack. 390103

- 24933

I'm completely satisfied with the hitch and have been asked by other riders where I bought it. 319568

Still working as advertised, thanks. Passed your link on to other riders.
Lutz Y - 12/11/2017


- 24933

Draw-tite sport frame trailer hitch 224697


Ask the Experts about this Draw-Tite Trailer Hitch

  • Does Draw Tite Hitch 24933 Come with Instructions and Tool List
    Yes, the Draw Tite hitch # 24933 does come with a set of printed instructions that have a list of all of the tools you'll need to complete the job. I attached a link to this page to see the instructions and also attached a picture from them that shows the tool list.
    view full answer...
  • Curt or Draw Tite Hitch Recommendation for 2017 Mazda CX-3 for Bike Rack
    For a bike rack the Draw Tite part # 24933 is the better choice as Curt requires a stabilizer strap like part # 18050 with their Class I hitches when carrying a non-supported load like a bike rack. You'll be much happier with the Draw Tite over the Curt.
    view full answer...
  • Concealed Trailer Hitch for a 2016 Mazda CX-3
    When Draw-Tite trailer hitch # 24933 is installed only the receiver will be showing on your 2016 Mazda CX-3. I have included a picture from the instructions showing he hitch installed for you. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.
    view full answer...
  • Recommended Trailer Hitch Receiver and Adapter for 1-1/4 Inch Trailer Hitch on 2018 Mazda CX-3
    There is not a 2 inch hitch receiver available for your 2018 Mazda CX-3, so to make your Kuat Bike Rack compatible, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24933
    view full answer...
  • Does a Trailer Hitch Decrease Ground Clearance on a 2017 Mazda CX-3
    The bottom of the receiver portion of trailer hitch # 24933 for your 2017 Mazda CX-3 will be approximately 9-1/2 inches up from the ground. There are some parts of the vehicle that hang a bit lower on the vehicle itself but as far as at the end of the CX-3 the hitch will be the lowest point. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack,...
    view full answer...
  • Trailer Hitch Fit Recommendation for a 2017 Mazda CX-3
    Officially we have to recommend that you always stay with the recommendation of the manufacturer on towing as they are who the warranty of the vehicle is with and they are who would have tested the vehicle for towing. That being said we realize that a lot of people ignore their owners manual and tow with vehicles that aren't designed for it and allegedly do not have any problems. So our hitch manufacturers make hitches for these vehicles as there is a demand for them but it's a situation...
    view full answer...
  • Do Draw-Tite Trailer Hitches Require a Stabilization Strap Like Curt Hitches for a 2016 Mazda CX-3
    Curt is the only manufacturer that requires the use of stabilization strap # 18050. No other manufacturers require it though you can still use it if you want to. The idea is that the strap reduces some of the stress on the hitch. Uhaul hitches are just rebranded hitches from other hitch manufacturers so it is a Draw-Tite or a Curt too. Any accessory you put in a hitch is going to move. This is because the shank of the accessory has to be a little smaller than the receiver opening so...
    view full answer...
  • Recommended Ball Mount for 2018 Mazda CX-3 that Has Draw Tite Hitch
    With Class I hitches like the Draw Tite part # 24933 that you referenced you have to use the ball mount that the hitch manufacturer requires which in this case is the Draw Tite part # 3593. Then for hitch balls you'd want the part # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch ball. You'll want trailer wiring too which for that the Tekonsha kit part # 118718 is the kit I recommend as it installs easily and has a very reliable converter box.
    view full answer...
  • Vehicle Fits of Draw-Tite Trailer Hitch # 24933
    The Draw-Tite hitch # 24933 fits the Mazda CX-3 from 2016 to 2018. It isn't designed for any other vehicles. If you're looking for a hitch to fit another vehicle let me know the year, make, and model and I'll make a recommendation for you.
    view full answer...
  • Which Bike Racks are Compatible with Class I Hitches for 2016 Mazda CX-3
    Sounds like you have a Class II bike rack by Yakima and would like to install it in the Draw Tite hitch part # 24933 which is a confirmed fit for the 2016 Mazda CX-3. Nearly all Yakima 1-1/4 inch hitches are Class II only so there's no way I can recommend a hitch that would work with your bike rack since all of the hitches for your vehicle are Class I. Only solution would be to go with a bike rack that is Class I compatible. The most popular bike rack we carry that has been confirmed...
    view full answer...
  • 2016 Mazda CX-3 Hitch Recommend and Explanation on How Many Bikes Class I Hitch can Carry
    Class I hitches can only carry up to 2 bikes on a bike rack. The problem is that additional bikes puts more weight on the hitch, but what really is the problem is the location of the weight. The additional bikes end up being so far away from the hitch that the weight gets basically multiplied due to the leverage of the distance. It is kind of like when you are changing a car tire and the lugs are really tight. If you use an extended breaker bar, it is easier to loosen the lug nuts. The...
    view full answer...
  • Compatibility of a Thule Doubletrack Pro with a Class I Hitch on a 2017 Mazda CX-3
    The Thule Doubletrack Pro, part # TH9054 is a useable rack for a Class I Draw-Tite Sport Frame, part # 24933 . The rack weighs 35 pounds and has enough clearance to go past the rear bumper. I've included a video of the rack on a similar 2013 Mazda CX-5 so you can get an idea of what it looks like installed.
    view full answer...
  • Will Swagman Bike Carrier Fit Trailer Hitch On 2016 Mazda CX-3
    The Draw-Tite Sportframe trailer hitch, part # 24933 will work great on your 2016 CX-3. This is a Class l hitch and it has a 1-1/4 inch receiver opening. I am not sure which Swagman bike rack you have, but the bike racks we have made by Swagman like the Trailhead, part # S63360 has a measurement of 11 inches from the center of the hitch pin hole to the closest part of the bike carrier. The Titan, part # S63400 has a distance of 11-1/4 inches, and both of these would work great for you....
    view full answer...
  • Will Thule Bike Racks Fit Draw Tite Hitch 24933 for 2016 Mazda CX-3
    The Draw Tite hitch part # 24933 is a Class I hitch with a 1-1/4 inch opening. Thule makes hitches that fit this size and Class. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Roadway 2 part # TH912XTR. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this one showed up in nearly everyone's top three. Check out the review video I attached for more info. If you plan on carrying any womens or alternative...
    view full answer...
  • Does Swagman XTC2 Bike Rack Fit 2016 Mazda 3 with Draw Tite Hitch Installed
    The Swagman XTC2 part # S64670 would work well on your 2016 Mazda CX-3 that has the Draw Tite hitch part # 24933 installed. The lower fascia of the vehicle does not need to be trimmed or come off either. If you are local you can contact customer service at 800 298 8924 to set up an install of the hitch and bike rack.
    view full answer...
  • Does Rola Cargo Carrier Work With Class I Trailer Hitch for 2017 Mazda CX-3
    I'm happy to confirm for you that the products you mentioned are each compatible for use on your 2017 Mazda CX-3: - Draw-Tite Trailer Hitch Receiver # 24933 - Rola Packer Cargo Carrier # 59530 - Loading Ramp # 288-07474 The ground clearance is about 11-1/2 inches from the top of the receiver on your Mazda to the ground, so you will want to go over any very sudden, steep inclines (like a driveway) slowly. The ramp has a cam buckle strap you will use to secure it to your cargo...
    view full answer...
  • Best Looking Trailer Hitch for 2018 Mazda CX-3
    Between the two hitches that fit your 2018 Mazda CX-3 the Curt, part # C11418, is tucked under the rear bumper by about an inch more than the Draw-Tite, part # 24933. Although I feel like the Curt is still more obvious to the eye because it has the thick outer collar around the receiver opening. I've attached pictures of them both installed so you can see the difference. Additionally, a hitch that sits closer to the bumper's edge is generally considered better for bike racks so the...
    view full answer...
  • Trailer Hitch for 2019 Mazda CX-3
    We do have trailer hitches to fit your 2019 Mazda CX-3 that are similar to the part # 90092 that you referenced. The available hitches for the 2019 CX-3 are the 1-1/4-inch size like # 90092 but they are lighter-duty Class I hitches. There are not any Class II hitches for your car. The available Class I hitches are Draw-Tite # 24933 and Curt # C11418. Between these two I recommend the USA-made Curt # C11418 because it will be easier to install. A video and the instructions both are...
    view full answer...
  • What Supports Bumper Fascia After Curt Trailer Hitch is Installed on a 2016 Mazda CX-3
    With Curt hitch # C11418 installed on a 2016 Mazda CX-3 the lower fascia is still attached elsewhere on the vehicle and it will also be resting on top of the hitch receiver. There isn't room to replace the brackets that were removed to install the hitch. It does not appear to be an issue with Draw-Tite hitch # 24933 and I have linked that video for you as well. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory...
    view full answer...
  • Comparison of Curt or Draw-Tite Trailer Hitch Receiver for Carrying Bikes on a 2016 Mazda CX-3
    Both the Curt # C11418 and Draw-Tite # 24933 trailer hitch receivers install into the same location as each other on your 2016 Mazda CX-3. However, the Draw-Tite does not require the use of the support strap # 18050 like the Curt does. Both racks are Class I, 1-1/4 inch hitch receivers so I doubt you will have a much different ride using the Draw-Tite instead of the Curt. Have you tried an anti-rattle device on the bike rack? If you can tell me the make and model of the bike rack...
    view full answer...
  • Compatibility of Brophy HT5R Hitch Adapter with 2-Inch Bike Carrier on 2016 Mazda CX-3
    Hitch adapters can sometimes be handy for a quick-fix, but since your 2016 Mazda CX-3 can only accept a light-duty 1-1/4-inch hitch I really cannot recommend using any type of hitch adapter. Here's why. Any type of adapter, such as the Brophy # HT5R, will cost you half of your hitch's rated capacity. So a 200-lb-rated Class I hitch like my recommended Draw-Tite # 24933 will have only a 100-lb capacity if used with the Brophy adapter. The reason for this loss of hitch capacity is that...
    view full answer...
  • Best Bike Rack Recommendation for 2019 Mazda CX-3
    The best bike rack style is a hitch mounted option so for your 2019 Mazda CX-3 you'll need to install a hitch first like the Draw Tite part # 24933 which is best option as it doesn't require a stabilizer strap like the equivalent Curt does for your vehicle. Now the easiest to use bike racks are platform racks as they are much easier to load then trying to fit the frame of your bike over the arms of a hanging rack. Typically the big drawback to platform racks is the weight but we have...
    view full answer...
  • Recommended 2-Bike Rack on a Mazda CX-3 with Class I Trailer Hitch Receiver
    I do have some options for you, however the Yakima Ridgeback 2 # Y02457 will not work on your Draw-Tite Sportframe # 24933 because it's a Class I trailer hitch and the Ridgeback 2 fits Class II and larger. Both Class I and Class II hitches are 1-1/4 inches, but as you realized they are not identical. For a great Class I hitch mount bike rack the Kuat Beta # B202-114 is a great choice. It has an anti-wobble hand-knob which makes it easier to tighten to the hitch receiver by hand instead...
    view full answer...
  • Hitch Recommendation to Use with Saris Freedom Bike Rack on 2016 Mazda CX-3
    The Saris Freedom part # SA4025f that you referenced will fit your 2016 Mazda CX-3 once you install a trailer hitch on it. For that you would want the part # 24933 that is confirmed as a fit for your vehicle. The Freedom is a great bike rack that is lightweight that I know you will like. I attached a review video for the rack for you to check out as well.
    view full answer...

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video by:
Joshua S
Video Edited:
Chris R
Written by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Hannah L
Updated by:
Isabelle B
Test Fit:
Brent H
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.