Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24899

lowest price pledge

Retail:$194.67

Our Price: $116.95

You Save: $77.72
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 21 lbs

Quantity: 
In Stock, Ships Today
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" Visible Cross Tube 24899
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Draw-Tite
  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • 200 lbs TW
  • Custom Fit Hitch
  • Visible Cross Tube
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24899 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (161)
  • Q & A (175)
  • Videos (12)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24899

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24899 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60325 Hidden Hitch Class 1 Trailer Hitch Receiver



24899 Installation InstructionsInstallation Details 24899 Installation instructions

This Product Fits The Following Vehicles

2009 - 2014 Acura TL

2009 - 2010 Acura TSX

2008 - 2017 Honda Accord Coupe

2008 - 2017 Honda Accord Sedan

2011 - 2014 Acura TSX Sedan



California residents: click here


Video of Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Hitch Installation - 2015 Honda Accord - Draw-Tite

Today on this 2015 Honda Accord we're going to show you part number 24899. This is a Draw-Tite Sportframe Class I 1-1/4" Receiver Hitch. This is what the hitch looks like when it's installed on the vehicle. First off, the hitch does sit below the bumper edge right here, so you can see the whole body of the hitch. It does require cutting of the panel if it's existing on your car. This has a square tube body and it also attaches to the tie-down loop right here. From this part down you can see from the hitch and then the rest of the hitch will go up, reach up around the trunk pan and go to the frame. This uses existing holes so there's no drilling required. This hitch is designed to pull a 2,000 pound trailer and it has a 200-pound tongue weight, which means the force pulling down on the hitch. We'll go ahead and give you some measurements to help you out in selecting some accessories, such as a bicycle rack or a cargo carrier.

From the top of the receiver opening down to the ground will be about 11-1/4". From the center of the hitch pin hole to the edge of your bumper will be about 2-1/4". Now I'll go ahead and show you how the hitch is installed. The first thing we need to do is get our car ready to install our hitch. To do that, we need to go ahead and lower the exhaust. Just spray down the rubber hanger, right here, with some lubricant and then we'll go ahead and pry it off.

We'll just use a pry bar to work it off. There'll be two hooks, one on each side. There it is. Up by the rear axle will be another one that we have to loosen up. I'll take our exhaust and I'll slowly lower it down. Next on the list, you get the car ready, is you go ahead and get the heat shield out of the way.

We'll put this up when we're done. We're going to remove four screws, one, two, three and four, and we'll use a 10mm socket to do that. Next off is this plastic shield underneath the trunk pan here. This has to be removed so we can put the hitch up. Optionally when we're done we can either trim it to make it fit or we can leave it off.

Some vehicles will have this panel and some won't. To remove the plastic rivet take a flat-blade screwdriver, just pop out the centers, then we can go ahead and pull out the rivet. Going towards the front of the car, this fastener's kind of hidden. Now there are two small bolts we have to remove and we'll still use our 10mm socket. Just go ahead and lower the panel out of the way. One of the last things we need to do is go ahead and enlarge this hole. There's some hardware that will be installed in this access hole right here and ran up towards the front. We need to make it just big enough to put this block inside. What we're going to do is take a wrench. We're going to use it just to deform the metal so we can make it just a little bit bigger. Also, you can use a file. Now we can go ahead and put the hardware into place for our hitch. This will be one of the attachment holes right here. It's already drilled into the frame so we'll take our bolt leader that comes with the kit and run it through the hole and then out towards our access hole. Then we'll take our block, we'll go ahead and thread it into place and push into the frame. We have a carriage bolt, push it into the frame, as well, and pull it on out. Now we're done with our driver side we'll do the same thing over on our passenger side. Another option is that you get a cold chisel and a mallet and just with a few whacks at it just go ahead and just make a dent in it, will work just as well, too. Then we'll install our hardware just like we did before on our driver's side. One more piece of hardware. This u-bolt will go over the tie-down loop and then we can go ahead and put our hitch in position. Now, there's two sets of slots on our hitch here. U-bolt will go through the ones that are going towards the front. With an extra set of hands we'll go ahead and put our hitch into place. We'll line up the u-bolt first and install the hardware. Once we put it in place we'll go ahead and attach it with our conicle-tooth washer and nut, and you always want to make sure the teeth on the washer always stays towards the hitch. We'll go ahead and line up the hitch with the bolts and make sure we don't push them back into place. You could leave the bolt leaders on if you'd like and do the same thing, then take them off when you're ready to install the hardware. The hardware will be the same, nut and then a conicle-tooth washer. Now with all our hardware loosely install we'll go ahead and tighten it down, then we'll torque the bolts down as specified in the instructions. We'll tighten down all our hardware using an 11/16 socket. We want to tighten down our u-bolt as even as possible on both sides. Now we'll go ahead and put our heat shield back up. We'll use three of the original fasteners now that are easy to get access to. We'll go ahead and get those started and then our last one here towards the bumper, we'll go ahead and use our socket and extension and we'll kind of have to force it up in there, making the heat shield bend around the hitch as needed. Now we'll go ahead and spray down our rubber hangers one more time and reinstall the exhaust. This is when you can decide if you want to keep the panel in place. On this install we're going to elect to leave ours off but if you wanted to it'd be pretty simple. You'd just have to make an opening here and just do like we're doing. Just hold it up there and see where you need to and then we can just slide it up into place. We will reinstall our original fasteners at the bottom of the bumper fascia. With that, that'll finish it for our install of part number 24899 from Draw-Tite, Sportframe 1-1/4" Class I Receiver Hitch on our 2015 Honda Accord. .


Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24899

Average Customer Rating:  4.7 out of 5 stars   (161 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

- 24899
by:
2017 Honda Accord

A challenging DIY install on 2017 Accord. The U-bolt spacing was not wide enough to fit over the tow ring. Also spacer bars were too wide and long to fit in access holes to support bolts in the rails. Finally extensive cutting/modification of the drip sheet to accomodate the tow rack frame and flanges. Overall, it took 2 people about 7 hrs to install. 627949



- 24899
by:
2016 Honda Accord

Received product in 5 business days. I am located on the West Coast and paid extra for 3-5 day shipping. Had my father and son install on my 2016 Honda Accord Touring Sedan. Took them 2 1/2hrs. May be quicker for others since it was a learning experience for my son. Had to do small modification to the carriage bolt plates to allow them to fit through the hole in the frame. Small amount of grinding. I am using this with a Yakima bike rack. First trip did great. Very happy with the look on my vehicle, and my purchase. Highly recommend it. 621759


Comments

The installation instructions the require the enlargement of the access hole using a wrench or a file. Their preference is to enlarge the access hole on the frame vs. grinding down the spacers.

-- Rachael H - 04/12/2019

52835

- 24899
by:

Great product. eTrailer.com is the true winner, with the search capabilities, instructions, and especially the videos is what makes the product nice. I thank you for website service, the ordering ease, the shipping and tracking, and the customer service. This is my second product that I have bought and it will not be the last. Thank you. 394397



- 24899
by:

cleaner look hidin a lot better than models for previous accords. better clearance from the bumper itself. mounting wise its simple as long as you know how to thread a needle on a larger scale. slight modification to the heat shield(s) (2 for v6 model) and by modification i mean a pair of tin snips and a 4 cuts to bend a .5 inch piece of shielding away (watch the video itll show you). it took me roughly 1 hour to complete in a driveway no jack and the only injury sustained was during removal of the exhaust hangers (slipped and hit the muffler tip which btw is fairly sharp). 147900



- 24899
by:
2008 Honda Accord

The fit was great! I actually 'supervised' while my daughter installed the Hitch on our '08 Accord. Have had no problems at all with the hitch 239678



- 24899
by:
2008 Honda Accord

It fits and looks really good. Our 2008 Accord took about 2 hours to install. I read where I had to lower the exhaust system but must've missed the part that mentioned I had to take a heat shield off and then cut a piece on it off to install the hitch. I loved the little wire tools that pull the bolts through the frame. Someone had their thinking cap on when they came up with that. All in all I'm very happy with my purchase but I would advise that the 3/4 hour to install this must be someone who has it up on a rack. 357328



- 24899
by:

It worked for me. My only problem was enlarging the feedthrough holes enough for the carriage bolt plates to fit through. I did the "pry with wrench" method rather than fileing. It took me several tries on each side to get the holes wide enough for the plates to slide in and turn the corner. Very good instructions and the installation looks good. I'm too lazy to take a picture but I'll tell anyone I'd recommend this kit. 11501



- 24899
by:
2013 Honda Accord

I just installed this hitch on my 2013 Honda Accord. The kit from etrailer contained all of the needed parts. The hitch fits perfectly, is secure and looks great. Etrailer did a great job of processing my order and George followed up to make sure that I had everything I needed. I installed this hitch so that I could mount my bike rack on my car. The rack was quite tight when I inserted it into the receiver which should help to stabilize the installation but I had to lubricate the parts to install it. I was able to easily remove the rack. Also, the plate above the receiver and the loops below make for a very small area in which to insert a wrench to tighten the rack. I could not use the tool that came with the rack and had to use a deep socket instead. Not a big deal. All in all I am quite satisfied with the hitch and with etrailer. 428246



- 24899
by:
2013 Honda Accord

Just recently purchased a hitch for my 2013 honda accord cpe v6 and was very satisfied. Delivery was super fast. Product is top quality. Easy to install. Did it all by myself. Took about a good 1hour from start to finish. Video on the site was very helpful for installation. Will post pictures soon. 83203


Comments

Hey Mark. I have a 2013 coupe. I was wondering why you chose this hitch over the Curt hitch. I cant decide between the two but this one looks good on your car.

-- comment by: Marten M - 03/26/2015

10364

- 24899
by:
2012 Acura TSX

I ordered the Draw-Tite sport trailer hitch for my 2012 Acura TSX Special Edition I called Andrea first to ask if the hitch would fit my model. She called Draw-Tite and Curt other companies were not sure if I would have to modify the lower rear valance. I took a chance and ordered it anyway Andrea was very helpful. Needless to say everything fit fine no modifications were necessary and it does not look bad at all. Just follow the installation videos on etrailer.com and it bolts up easy. 192263


Comments

I have a 2012 TSX SE as well. Did you have to modify the black plastic center panel and the heat shields as shown in the video?Thanks Gman.

-- comment by: Steve - 07/22/2015

13580
Comments

Hi Steve, yes I did have to trim the plastic black center panel and the muffler heat shields as shown in the video. I think I may have chose the wrong words when I said no modifications. No modifications referred to the rear lower section of the bumperground effects on the Special Edition.There was uncertainty when I was looking for a trailer hitch if I would have to trim or cut the rear bumper ground effects. You do not have to trim the bumper the hitch fits fine.

-- comment by: Gman - 07/24/2015

13614

- 24899
by:
2014 Honda Accord

experience was great - fit not so much. The holes were too small for the bolts and the frame mount to fit into the holes. This was a GIANT PAIN TO open these holes up. I had to grind the carriage bolt holder peice and grind the frame hole opening. Why not just make the holder a little smaller to fit? Come-on-man... There was nothing in there about having to remove the plastic shield under the center of the spare tire area and not reinstall it? Just overall bad instructions and even the video did not mention these things. Product is good, shipping good, price good. 518982



- 24899
by:
2014 Honda Accord

Took only three days to receive hitch. Had it installed on my Honda Accord by a local trucking company. It took 30 minutes and cost $$. Very happy with the product and with etrailer.com. Thanks! 363256



- 24899
by:
2013 Honda Accord

Comparison Review Draw-Tite or Drawtite 24899 and Curt 11681 hitches for 2013 Honda Accord 4-dr. Due to a manufacturing defect on the first hitch I installed, I had the pleasure of installing both of these hitches in the past 3 weeks on my Accord. This experience makes me uniquely qualified to write this review. Mounting hardware: Draw-Tite came with SAE Grade 5 carriage bolts, Curt came with stronger Grade 8 carriage bolts and nuts. Apparent strength of the hitch: reviews of the Curt state that a strap is needed to stabilize bike racks, Draw-Tite does not incl. this warranty condition. However, the Curt’s receiver channel has a welded collar that reinforces the square tube that is the business end of the receiver, the Draw-Tite does not. I suspect that Curt’s collar makes the receiver’s square tube less likely to split due to the high leverage of a bike rack. Ease of Installation: Both hitches require a “spacer” or block that fits into the Accord’s rails with the carriage bolts. The width of the Draw-Tite’s spacer required the entrance hole to be enlarged by drilling, filing, or prying open the hole on my brand new Accord, the Curt’s spacer is sized so that it just slips in the existing hole without modification. Appearance: Both reveal about the same amount, the rounded cross section of the Curt tubing results in a more attractive look. Ground Clearance: When installed, the Curt hitch has better ground clearance that the Draw-Tite. Paint finish: the same for both. Manufacturing Quality Control: The sample of Draw-Tite (bearing a “Made in Mexico” sticker) I installed was defective. Drawbars had to be pounded in by sledge hammer and awkwardly pounded out by same, ruining the finish on the drawbar. Apparently, the receiver channel was deformed when the manufacturer “punched” the holes in the receiver channel that the drawbar pin fits through. Once the drawbar was pounded in, a welded button or stop within the channel prevented the drawbar from going in deep enough so that the drawbar holes and receiver channel holes lined up. Draw-Tite Customer Service acknowledged the defect and said that they had had several calls on this, were manufacturing new ones, orders were on backorder and I’d have to work with the place I bought the hitch for replacement. E-Trailer Customer service was superb, they contacted Draw-Tite, confirmed backorder status, shipped me the slightly more expensive Curt at no extra charge, provided pre-paid return shipping label for the defective Draw-Tite. The sample from Curt installed and worked perfectly. Thorough this experience with Draw-Tite, I had the pleasure of spending the time installing a hitch twice on the same car and gathering the data to write this review. You have the benefit of reading this comparison review. 89392


Comments

Just a quick note, the button or stop is intended to be present on Draw-Tite and Hidden Hitch Class I, 1-1/4 inch hitches. That stop will prevent the use of Class II Only designed ball mounts, carriers and racks.

-- Patrick B - 07/16/2013

1763
Comments

Thanks for this comparison!!

-- comment by: R s - 02/23/2014

2904
Comments

Thank you so much for your excellent review. My choice is now very easy.

-- comment by: Greg G - 08/12/2015

14188

- 24899
by:
2012 Honda Accord

Great product. It took me and my son 5 hours to install. Get a long ratchet to get the screws out of the plastic cover underneath. Heat shield is a bit if a pain but just keep trimming it till it fits. The video says to us a cargo stap to hold the muffler up. We used a car jack. Video said to leave the plastic cover off after installation. I figured the manufacturer put it there for a reason. I used tin snips to trim it up. Plastic pins can't be used again so we used cable ties. Everything fits perfectly. 433167


Comments

I am very pleased with the hitch.

Rich - 09/17/2018

43678

- 24899
by:
2014 Honda Accord

Not too hard a job. Aside from having road grit fall in my eyes while on my back, the most difficult task was reattaching the rubber muffler mount. Great looking installation, and very fast service. I've used etrailer for 3 hitches and have always been happy with the products and service. 551854



- 24899
by:
2009 Honda Accord

Good looking product (for something that goes under your car). Easy install. I had to make the holes just a bit wider on the car frame to fit the plates through the wholes. That took the longest time. Other than that, pretty easy install. Trust me! I have a hard time changing a light bulb and this was relatively pain free. I did it all alone! and it took me about 1 hour. I've been using it to carry my bike rack and so far so good. Have yet to tow anything with it. I will however be towing my motorcycle this weekend. We'll see how it handles then. You can barely see it on a Honda Accord 2009. The people at etrailer were very professional, fast delivery, and are very involve in customer satisfaction. I would definitely buy from them again 309430



- 24899
by:

I got this hitch to pull a light trailer. I like that I didn't have to drill any new holes to make it work. I also like that it is a solid, exact fit to my car. The video etrailer provides for this part is great. It not only explains but very clearly shows you step by step just what you need to do to install it, making the job virtually fool-proof. It was a great help to me. 669981



- 24899
by:
2012 Acura TL

Would get 5 stars if my ball and hitch would get stuck in the receiver. Over all good products and is barely noticeable after installation. 668666


Comments

This is a Class 1 hitch that requires the use of Class 1 hitch accessories. For this product the manfucturers recommended ball mount is 3593, and the installation instructions note the ball mount must be used in the rise position only.

-- Rachael H - 07/13/2019

57773

- 24899
by:

Purchased for a 2014 Accord Sport. The powder coating flaked off in two places - very small areas. Had some rustolium black to re-paint areas but i'm not 100% sure I didn't damage while installing. Only had two issues that not covered in written instructions and video. I had to enlarge the hole in the frame rail at the attachment point - fortunately had a bit large enough and didn't have to run out to buy one. The 2nd issue was that there is an extra plastic body panel under my spare tire well that interfered with the horizontal bars of the hitch. Used an oscillating multi-tool to cut out areas for clearance (see photos). Not mentioned in the video - with dual exhaust I felt the mufflers were too heavy to let just hang - so i supported with a jack stand. The only problem with this was having to adjust the jack stand to work on either side of the car. Overall - fairly easy install - I did it all by myself on ramps - would have given 4-1/2 stars if option available. I was fortunate to have all the additional tools necessary to complete the install - would have been nice to know all that I would need ahead of time. 667551



- 24899
by:
Honda Odyssey

Works fine, no issues at all. Planning to have you install another hitch on our Odyssey van. 659995



- 24899
by:
Honda Accord

2008 Accord Coupe V6 dual exhaust - Fit like a glove 655686



- 24899
by:
2009 Honda Accord

Love it so easy to Install, I was able to Install it in less then 45 minutes on my 09 accord. 654953



- 24899
by:

Product Arrived Quicker Than Expected And Was A Breeze To Install. Great Product And Would Advise Anyone Needing Hitch To Purchase. Thank You So Very Much. 649268



- 24899
by:

Great Customer Service! Kaylynn was so helpful and on top of my order,Well informed by suggesting the right attachment for my main order.I will definitely use this Company again! 646868



- 24899
by:
Honda Accord

Perfect fit. Install video made it look easier to install than actuality. You will need to elongated the holes in the frame of the accord before you can slide the carriage bolt and bracket through. Make sure you have a drill with a large bit or grinder capable of fitting in the muffler area. Overall satisfied with the hitch. Took about 3 hours to install. Installation video was helpful. Shipping was extremely fast. Order on a Monday and received by Wednesday. 643040



- 24899
by:
Honda Accord

The was a perfect fit for my Honda Accord. I was able to install my self but i highly recommend you have technical skills and good with tools and check you have all the hardware bolted on tight. and double check your work before towing... 643547



- 24899
by:

Excellent equipment 639155



- 24899
by:

Quick and easy to install. By myself I installed the hitch in 2 hours. 634301



- 24899
by:
Ford Edge

Fairly straight forward. With the right tools (including tin snips) its a two hour job. I used a air grinder which made the hole widening task a breeze. But you could also just grind down an edge on the rectangular carriage bolt piece to make it fit the hole. Love the wire feeder thing - nice! 634125



- 24899
by:

It installed just like the video. The hardest part was getting the muffler supports off and on without the proper tool. 633697



- 24899
by:
2009 Honda Accord

This was easy to apply and a perfect fit to my Honda Accord ! I followed the video and it was as easy as it gets to perform and apply ! Thanks E- Trailer . Another Satisfied customer ! 620243



- 24899
by:
2012 Honda Accord

We purchased a Draw-Tite Class I Sport Frame Receiver Hitch for our 2012 Honda Accord. This hitch is well constructed and solid. We are using it for a bike rack. It took about 1.5 hours to install...the installation video was spot on! Though the instructions indicated the installation is a two person job, it CAN be done by one. We are very happy with this product as we took a four day road trip from Nebraska to Texas and it performed perfectly. I would recommend this product to others. 619252



- 24899
by:
2009 Honda Accord

Fits and looks great. Easy to install 611796



- 24899
by:
2015 Honda Accord

Perfect fit on my 2015 Honda Accord 2 door coupe. It took some time to install it, but that’s fine. I didn’t have to pay anyone to do it for me. And the installation was easy enough. 602206



- 24899
by:

Good product! Worked perfect just as e xpected. 600740



- 24899
by:
2016 Honda Accord

The hitch arrived when promised..I'm handicapped, so I took the Honda to the Hitching Post and they installed it in under 30 minutes.. Perfect fit, great price & Free shipping.. It was a Birthday present for my wife's 70th. She's happy now she can take her car with the bike rack and ride anytime without taking my big truck.Thank you etrailer! 598389



- 24899
by:
2017 Honda Accord

Excellent product for 2017 Honda Accord EXL sedan. Great value for price. I strongly recommend this product AND I strongly reccommend that you have your mechanic install. The modifications needed to install are difficult unless you have a vehicle lift. For the extra $100 it cost to install by my mechanic saves you 5 hours of your life. 594127



- 24899
by:
2012 Honda Accord

Well made product, great, personal etrailer service. 592806



- 24899
by:

I have been very pleased with the hitch. I only use it for a bike rack, but it has worked perfectly for that use. 591293



- 24899
by:

All working out fine! Great service, easy install, using it quite a bit! Thank you! 589487



- 24899
by:

Bought this hitch for a customers vehicle. Came fast. Customer is pleased will buy from e-trailer again. 583842



- 24899
by:
2014 Honda Accord

it came in perfecfect condition and fast. Thank you 583440



- 24899
by:

The receiver is super solid. It came packaged very well, and had all of the parts and installation instructions included. If anyone ever asks me where they can find a receiver or anything that eTrailer sells, I can guarantee that this will be the one and only place I recommend. 580946



- 24899
by:
2017 Honda Accord

Easy to navigate website with awesome tutorials and great pricing. Super fast shipping as well! Thanks! 577554



- 24899
by:

Great product- I would recommend this site to everyone who is looking for a Trailer Hitch 566124



- 24899
by:
2017 Honda Accord

Haven't unboxed, but shipping came fast! 560879



- 24899
by:
Honda Accord

I use it for my bike rack on my Honda Accord and it works perfect. 550448



- 24899
by:
2013 Honda Accord

Install was a bit more involved than I expected because of the need to snake hardware down the chassis channel. I had to ream out some holes and trim heat shields. Very solid well made product and its on there very solid as well. 545549



- 24899
by:
2011 Honda Accord

Product fits properly, installed as advertised, and has worked well for us so far. We use it for a bike rack (two bike, platform type) on a 2011 Honda Accord. 543119



- 24899
by:
2011 Honda Accord

Product fits properly, installed as advertised, and has worked well for us so far. We use it for a bike rack (two bike, platform type) on a 2011 Honda Accord. 543115


67
186
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch
Do you have a question about this Trailer Hitch?


  • Availability of a Trailer Hitch to Fit a 2017 Honda Accord Hybrid
  • I have a solution for you. We carry two Class I 1-/14 inch trailer hitches that will fit your 2017 Honda Accord Sedan Hybrid. I contacted the manufacturers and they confirmed that the Draw-Tite Class I # 24899 and the Curt class I Hitch # C11681 will your vehicle. Both hitches will work well with a Class I bike rack. I recommend the Draw-Tite over the Curt hitch because it does not require the use of a stabilizer strap like # 18050. Curt requires the use of a stabilizer strap on...
    view full answer...

  • Hitch Recommendation for a 2017 Honda Accord Hybrid for Bike Rack
  • For your 2017 Honda Accord Hybrid the Draw Tite hitch part # 24899 is a confirmed fit. For a bike rack you will be limited to 2 bikes maximum because the hitches for the vehicle are Class I hitches. I recommend going with a light weight bike rack to reduce the stress on the hitch and vehicle. The Kuat Beta, # B202-114, is a great option. It is Class I compatible, holds 2 bikes, and weighs just over 12 pounds. I have linked a video review of this bike rack for you. If you plan on...
    view full answer...

  • Recommended Wheel Mount Bike Rack With Locks for a 2014 Honda Accord
  • I do have an option for you but there is not a 2" trailer hitch available for your 2014 Honda Accord so there is no way to use the Hollywood Racks TRS SE 2-Bike Platform Rack part # HR3500. Instead, I recommend the RockyMounts MonoRail 2 Bike Platform Rack part # RKY10003 which has all of the features that you liked and needed in the above; 60 lb per bike weight capacity, 1-1/4" trailer hitch compatibility, folding for storage, wheel mount, black in color, and it comes with both bike and...
    view full answer...

  • Maximum Towing Capacity and Parts Needed to Tow a Waverunner with a 2017 Honda Accord
  • The maximum towing capacity of your 2017 Honda Accord is 1,000 lbs. The towing capacity of the hitch will not change the vehicle's towing capacity as the lower of the two ratings (vehicle/hitch) will always be the limiting factor. For your Accord, I recommend using the Draw-Tite Sportframe Trailer Hitch Receiver part # 24899 which is a Class I hitch with a 1-1/4" receiver tube opening. The only real difference between the two hitches is that Curt part # C11681 will require the use of a...
    view full answer...

  • Which Trailer Hitch Fits 2010 Honda Accord Ex-L V6
  • The EcoHitch you referenced only fits the Crosstour models of the 2010 Honda Accord. You'd have to go with a hitch like the Draw Tite part # 24899 which fits the sedan and coupe models like what an EX-L model is. I attached an install video for this hitch for you to check out as well.
    view full answer...

  • Parts Needed to Tow with a 2015 Honda Accord EX V6
  • Out of the available trailer hitches for your 2015 Honda Accord I recommend going with the Curt Trailer Hitch Receiver # C11681 over the Draw-Tite Sportframe # 24899. They are both identical in Class and weight ratings and come with a 1-1/4" receiver. Please note that Class I trailer hitches are only rated to carry up to 2 bikes. The Curt warranty requires a Stabilizer Strap # 18050 for all non-supported loads, like the Yakima HoldUp # Y02443, but it doesn't have the weld stop inside...
    view full answer...

  • Ball Mount Recommendation for Draw Tite Hitch Installed on 2011 Honda Accord Sedan
  • For Class I hitches like the Draw Tite part # 24899 that you mentioned which fits your 2011 Honda Accord you have to go with the required ball mount by the manufacturer, which in this case is the # 3593 which has to be used in the rise position. Then for hitch balls you'd want the part # 19258 for a 2 inch ball or the part # 19256 for a 1-7/8 inch ball. For trailer wiring you'd then want the part # 118420 which is a custom fit and comes with a very reliable converter box.
    view full answer...

  • Everything Needed to Tow With 2016 Honda Accord
  • I took a look at the owner's manual for a 2016 Honda Accord and though you will be able to tow a trailer, please keep in mind that the maximum your Accord can tow is 1,000 lbs. To do so you would need to start with a trailer hitch, and I recommend the Draw-Tite # 24899 which has a 1-1/4" receiver and is a bolt-on installation so there will be no drilling into your Accord's frame; I have linked a video showing an install of this hitch on a '16 Accord for you to take a look at. In...
    view full answer...

  • Curt and Draw Tite Hitch Comparison for 2016 Honda Accord Touring V6
  • All of the hitches we offer for the 2016 Honda Accord are going to give you the same amount of ground clearance. When we measured where the hitches sat in relation to the ground for both the Curt # C11681 and Draw Tite # 24899 we found that they had almost identical dimensions. If it were me I would go with the Draw Tite though since it does not require the use of a stabilizer strap like part # 18050 when using a non-supported load like a bike rack. The most popular bike rack we carry...
    view full answer...

  • Which Hitch Sticks Out the Most on a 2017 Honda Accord
  • For your 2017 Honda Accord, the Curt Trailer Hitch Receiver part # C11681 would give you the greatest extension. When we installed this hitch on a 2015 Honda Accord we found that the distance from the center of the hitch pin hole to the outer edge of the bumper is 2-3/4". When we installed the Draw-Tite Sportframe Trailer Hitch Receiver part # 24899 on a 2017 Honda Accord we found that the distance from the center of the hitch pin hole to the outer edge of the bumper is 3". I have attached...
    view full answer...

  • Why Does Curt Class I Hitch # C11681 Require Stabilization Strap But the Draw-Tite # 24899 Does Not
  • Curt does require that in order to maintain the limited lifetime warranty coverage on their Class I trailer hitch receivers a stabilizing strap must be used. This precaution does not indicate any weakness in the Curt hitch as compared to the Draw-Tite or Hidden-Hitch models. All are built to essentially identical standards. Curt simply chooses to be extra cautious by requiring use of the strap, which is a very good idea with any of the available hitches. Curt strap # 18050 is a cost-effective...
    view full answer...

  • Recommended Trailer Hitch for 2015 Honda Accord Hybrid
  • As you referenced in your question, both the Draw-Tite # 24899 and Curt # C11681 Class I Trailer Hitches are confirmed to fit your 2015 Honda Accord. As you also mentioned, Curt requires that with their Class I and II trailer hitches, a stabilizing strap like # 18050 be used with any non-trailer loads such as bike racks and cargo carriers. This is not an indication of the hitch's strength or stability, but simply an extra precaution Curt takes to further support the hitch. Both...
    view full answer...

  • Towing Capacity of a 2013 Honda Accord Touring
  • You are correct that the Draw-Tite Sportframe Trailer Hitch Receiver part # 24899 which is a fit for your 2013 Honda Accord Touring has a 2,000 lb gross trailer weight (GTW) capacity. However, the vehicle only has a 1,000 lb gross trailer weight (GTW) capacity and since this is the lowest rated component in the system, it will need to be the figure you abide by. Therefore, I cannot recommend you use this vehicle to tow a 2,500 lb vehicle even with a tow dolly. If you choose to do so...
    view full answer...

  • Hitch Recommendation for a 2007 Honda Accord
  • The Draw Tite Hitch part # 24899 that you referenced will not fit a 2007 Honda Accord. If it was a year newer it would as this hitch will fit 2008-2013 Accords. You would want a Draw-Tite part # 24787 for your Accord. I attached an install video for you to check out. To complete your towing setup you may also be interested in the following products. A ball mount. Trailer wiring part # 118302 and 1-7/8 inch hitch ball part # 19256.
    view full answer...

  • Compatibility of Draw-Tite Class I Trailer Hitch w/ 2016 Honda Accord Touring Model w/ Dual Exhaust
  • The Draw-Tite Class I trailer hitch, part # 24899 is indeed compatible with your 2016 Honda Accord Touring model with dual exhaust. Minor modifications will be necessary to install the hitch. In some cases, the access hole in the frame member might need to be enlarged slightly to allow the installation hardware to be fished through the frame. The heat shields are temporarily removed, then reattached, the shield might need to be bent or trimmed to clear the fasteners. If the vehicle has...
    view full answer...

  • Trailer Hitch That Fits a 2017 Honda Accord Hybrid
  • The hitch I recommend that fits a 2017 Honda Accord hybrid is the Draw-Tite # 24899 because the manufacturer does not require the use of stabilizing straps with your bike rack like the Curt hitch does. This hitch has a 1-1/4 inch receiver and will bolt on to your Accord hybrid. Note that this hitch is going to require the trimming of the underbody panel on your Accord hybrid. I've added a link to a video of this hitch being installed on a '17 Accord as well as a link to our selection...
    view full answer...

  • Recommended Trailer Hitch for 2016 Honda Accord Sport
  • For the 2016 Honda Accord Sport 4-door sedan we do offer 1-1/4-inch Class I hitches from both Curt and Draw-Tite. Both hitches are quality items and their installation is the same since they mount in the exact same spot on the car's frame. But the one I suggest is the Draw-Tite # 24899 because it does not have the requirement to use a stabilizing strap # 18050 as the Curt does, for loads like bike racks and cargo carriers. If you plan to tow you'll also need a ball mount, hitch ball...
    view full answer...

  • Recommended Trailer Hitch for 2011 Honda Accord 4 Door Sedan
  • All the hitches available for your 2011 Honda Accord 4-Door Sedan are a Class I 1-1/4 inch size. A Class I hitch will only accept Class I rated accessories, like bike racks if your mother is interested in them. I am including a link to a FAQ page on hitch sizes and different class ratings. It will describe the difference in the Class I rated hitch. The hitch I recommend is the Draw-Tite Class I 1-1/4 Inch Hitch, part # 24899 . This hitch does not include the ball mount, which is used...
    view full answer...

  • Why Wont the Yakima HoldUp Fit a Class I Trailer Hitch on a 2017 Honda Accord
  • The problem is that the hitch you have is a Class I hitch, probably made by Reese, Draw-Tite, or Hidden Hitch. Those hitches have a stop punched into the shank to prevent the use of Class II accessories from being used. It is meant to prevent someone from overloading a Class I hitch. The Yakima HoldUp for 1-1/4 inch hitches, # Y02445, is for Class II hitches that do not have that stop. In order to use that rack you would have to remove that stop. However doing so will void the hitch...
    view full answer...

  • Recommended Trailer Hitch Receiver for 2017 Honda Accord Hybrid
  • For your 2017 Honda Accord Hybrid, the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24899 is the best fit. There are only 1-1/4 inch hitch options for your vehicle and that will only allow a maximum of two bikes even if your bike carrier is 4 bikes and can fit the 1-1/4 inch receiver. This is due to the torque that 4 bikes would put on the hitch, so Class I rated hitches like # TH934XTR for example will have a note in the instructions as on our product...
    view full answer...

  • Difference Between Hidden Hitch # 60325 and Draw-Tite # 24899 for 2008 Honda Accord 4 Dr.
  • The Hidden Hitch # 60325 (no longer available) and Draw-Tite # 24899 are manufactured by the same parent company, Cequent Performance Products. Both hitches will appear identical, will share the same weight ratings, and will install in exactly the same manner. If you were using the hitch as the attachment point for a 2 bike rack or other hitch mounted accessory that is compatible with a Class I receiver, and are not planning on doing any light-duty towing, the Draw-Tite hitch would be...
    view full answer...

  • Draw-Tite vs Curt Hitch for a 2013 Honda Accord
  • For carrying a bike rack the biggest advantage that the Draw-Tite Hitch # 24899 has over the Curt Hitch # C11681 is that it does not require the use of a stabilizing strap when carrying a non-supported load such as a bike rack. If you went with the Curt hitch you would also need a Curt Stabilizing Strap # 18050 to secure the rack. I attached a video on how this is done, but basically you will need to attach the strap to the rack and then run the other end of it to the edge of your trunk...
    view full answer...

  • Trailer Hitch and Wiring for a 2012 Acura TL
  • I believe it is the angle of the photos because both Curt hitch # C11496 and Draw-Tite trailer hitch # 24899 will have the receiver and a good portion of the cross tubing exposed below the fascia on your 2012 Acura TL. If you plan on towing with the Curt hitch then use # C45521 for the ball mount. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. Part # F-4 is the pin and clip you need. If you will not be towing then I recommend Draw-Tite hitch # 24899 because it...
    view full answer...

  • Recommended Trailer Hitch And Hitch Mount Bike Carrier For 2015 Honda Accord
  • The reason why the Kuat Transfer 2, part # TS02G will work with your Class l hitch but the Transfer 3, part # TS03G won't is not because of the combined weight of the bikes. It is due to the additional stress that is placed on the hitch and back of the vehicle when a third bike is added to a carrier because of the extended distance from the rear of the vehicle. With your Accord being limited to a Class l hitch I cannot recommend any 3-bike bike carriers. The Curt trailer hitch,...
    view full answer...

  • Why are Stabilization Straps Required for Non-Trailer Loads on Some Curt Trailer Hitches
  • Curt requires that any of their hitches that are NOT rated for weight distribution use a stabilization strap # 18050 for non-trailer loads. This is to be in compliance with their warranty requirements. The strap reduces some of the stress on the hitch and where it is attached on the vehicle.
    view full answer...

  • Availability of Trailer Hitch for 2009 Honda Accord to Allow Use of 2-inch Hitch Bike Rack
  • The size and class of hitch available for your 2009 Honda Accord is a 1-1/4-inch Class I hitch such as Curt # C11085 and Draw-Tite # 24899. No 2-inch hitches are made for your car because its frame is not strong enough for the weight ratings of a 2-inch Class III hitch. As you noted, there are adapters like the Brophy # HTAD and # HT5R that fit your 1-1/4-inch hitch and provide a 2-inch receiver opening for the 2-inch accessory. These are both about 7-inches long, a good bit shorter...
    view full answer...

  • Which Hitch to Carry Bike Rack On 2013 Honda Accord 4-Door
  • Of the available hitches for your 2013 Honda Accord, I believe that the Curt Class I Receiver, part # C11681 would provide the best appearance. The cross tube is constructed of tubular powder coated steel, which in many peoples opinion looks better than the square tubing of the Draw-Tite or Hidden Hitch models. The tubing bends up and back a few inches to either side of the receiver opening, which means that the entire cross tube is not visible from the rear. I have provided a photo...
    view full answer...

  • Best Trailer Hitch Recommendation for a 2014 Honda Accord for Bike Rack
  • Since the Curt hitch requires you to use a stabilizer strap like the part # 18050 when carrying a non supported load like a bike rack that would be the first hitch to take out of consideration for you. Since the Hidden Hitch comes with a ball mount that you wouldn't need and costs a bit more I would recommend the Draw Tite part # 24899. I attached an install video for you to check out as well. The Swagman XTC2, part # S64670 is one of the most popular racks because it's so easy to...
    view full answer...

  • Best Bike Carrier Type for High-End Carbon Fiber Road Bike Transported on 2016 Honda Accord
  • The best solution for you to carry your high-end carbon fiber road bike on your new 2016 Honda Accord is to install a light-duty Class I hitch such as # 24899 from Draw-Tite. This will completely avoid your valid concerns about wear on your new car's paint. This hitch will install without drilling using the included hardware. Some trimming of underbody panels will be required and you'll find it easier to get to the mounting points if you lower the exhaust. This is easy to do and the whole...
    view full answer...

  • Installing Draw-Tite Class I Receiver # 24899 on 2013 Honda Accord
  • As you can see by looking at the installation instructions I have linked to, the procedure for installing the # 24899 is quite a bit more involved than that used when you installed the # 60953 on your 2003 Accord. Because the heat shields will need to be bent out of the way to allow access to where the hitch attaches to the frame members, lowering the exhaust will be a necessity. Lowering the exhaust is not terribly difficult, you will need to spray some lubricant like WD-40 on the exhaust...
    view full answer...


Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Photos by:
Theodore B
Expert Research:
Michael L
Video Edited:
Zack K
Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Video Edited:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Jacob T
Video Edited:
Andrew L
Expert Research:
Adam R
Video Edited:
Kathleen M
Updated by:
Laura H
Test Fit:
Shane T
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video by:
Alan C
Video Edited:
Chris R
Photos by:
Zach O
Updated by:
Alexander C
Updated by:
Amanda M
Video Edited:
Zach D
Updated by:
Jenny M
Test Fit:
Brent H
Test Fit:
Shane H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.