See what our Experts say about this CURT Trailer Hitch

• Can TorkLift Camper Tie-Downs for 2022 Ram 3500 Short Bed Be Installed Without TorkLift Hitch
  Hi Joe; you do not have to have the TorkLift hitch to install their tie-downs on your 2022 Ram 3500. However, you will need some kind of hitch for these to work. Assuming you have a factory hitch and no running boards/cab length running boards you can use the TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL23NR. If you don't have a factory hitch you will need to add an aftermarket hitch like the Curt # C15801. With the aftermarket hitch you will need the # TL75SV instead....
  view full answer...
• What Size Frame Does Curt Hitch for 2020 Ram 2500 Fit
  Hi Eric! The Curt Trailer Hitch # C15801 is designed for the roughly 42" wide frame found on the 2016–2028 Ram 2500 and 3500 with the 6-1/2' bed. That is approximately 42" from outside flange to outside flange, or around 41" on center. As long as you have the standard pickup and not a cab and chassis model, this will fit. What will you be using the hitch for?
  view full answer...
• Does Curt Hitch C15801 Fit 2017 Ram 2500 with Factory Hitch
  Hey Jason, the Curt hitch part # C15801 that you referenced does fit your 2017 Ram 2500 with a factory hitch but it was designed to allow the factory hitch to be left installed with it as well. So with this installed you would also have the factory hitch in place as well.
  view full answer...
• High Capacity Trailer Hitch that Fits 2024 Ram 3500
  Hey George, I checked with Torlift and at this time they do not have any hitches that fit the rear of your 2025 Ram 3500 but we do have the Curt part # C15801 which is our highest rated hitch that fits your vehicle as it is rated to tow up t a 20,000 lb trailer.
  view full answer...
• Recommended Hitch for a 2022 Ram 3500
  We have a couple of options depending on the bed length of your 2022 Ram 3500 and whether or not you have the factory hitch. If you have the factory hitch you will want the TorkLift SuperHitch Magnum Trailer Hitch Receiver item # TLD1111-30. This is compatible with both the 6-1/2' and 8' bed models. This hitch has a 2-1/2" and 2" receiver with a maximum capacity of 20,000 lbs. With this hitch you will be able to use the TorkLift SuperTruss Hitch Extension item # TLE1542 you were looking...
  view full answer...
• Does Curt Hitch # C15801 fit Ram 2500 with Factory Hitch and Would it Have to be Removed
  The Curt Class V hitch part # C15801 does fit Ram trucks that have the factory hitch but it does not replace the factory hitch. Instead it install below it. This fits versions of the truck that have and do not have the factory hitch. We do not have any that replace the factory hitch.
  view full answer...
• Can I Remove The Factory Hitch And Install The Curt Hitch # C15801 On My 2016 Ram 2500
  Yes, you can remove/replace the factory hitch on your 2016 Ram 2500 with The Curt Trailer Hitch Receiver # C15801. If you want to keep the factory hitch on you can do that as well and use the factory hitch so you can carry a bike rack or other hitch-mounted accessory while you tow. If you do remove it you will be able to stow a larger spare tire underneath your 2016 Ram 2500 6-1/2 foot bed with out without a factory installed hitch. The trailer hitch has a bolt-on installation that requires...
  view full answer...
• Curt Trailer Hitch 15801 on 2018 Ram 2500 with Ranch Hand Legend Bumper
  I went to the warehouse to measure the brackets of Curt hitch # C15801 and found it was approximately 8-1/2" from the top of the brackets to the top of the receiver tube (see accompanying photo). So the fit will depend on how much room there is from the bottom of your 2018 Ram 2500's frame where the hitch installs to the bottom of your Ranch Hand Legend Bumper. You will need to measure that distance, and If the measurement is less than 8-1/2" the Curt # C15801 will fit your truck because...
  view full answer...
  
• Recommended Class V Hitch for a 2022 Ram 3500 w/ a 6-1/2' Bed
  Yes, it will so long as you have a 6-1/2' bed. The Curt Trailer Hitch item # C15801 is confirmed to fit the 2022 Ram 3500's with or without a factory hitch. This class V hitch has a 2-1/2" receiver and bolts to your Ram with included hardware. It has a massive 20,000 lbs towing capacity and a 2,700 lbs maximum tongue weight. If you have the 8' bed with a factory hitch you will want the Draw-Tite Trailer Hitch item # DT45509.
  view full answer...
• Fit of Curt Class V Trailer Hitch Receiver to 2021 Ram 2500
  We do not have the measurements for the OEM hitch available to compare however, I can tell you that the Curt Class V Trailer Hitch Receiver, # C15801 is 8-1/2" from the top of the brackets to the top of the receiver tube. Please note the attached image. You can compare this measurement against what you currently have installed.
  view full answer...
  
• Is the Curt Hitch C15800 Designed to Fit Standard 2019 Ram 3500 Pickup
  If your 2019 Ram 3500 is a pick-up truck the Curt Class V Receiver Hitch part # C15800 is not a fit because it fits the cab and chassis model of the Ram 3500 which have a 34" wide frame. If your truck is a cab and chassis with 34" wide frame the Curt receiver is a great choice. I have attached a video of the hitch installed on a cab and chassis for your reference. It sounds like your truck is a 2019 Ram 3500 pick up. If it is a short bed model with a 6-1/2 ft bed, I recommend Curt Trailer...
  view full answer...
• Recommended Class V Hitch for a 2022 Ram 3500
  I would be happy to help you find a hitch for your 2022 Ram 3500. It looks like your 30’ Airstream International has a maximum capacity of 10,000 lbs. I have a couple of options for you depending on the bed length of your truck. All of the hitches with the capacity you are looking for require drilling for installation. If you have an 8 foot bed with or without the factory hitch you will want the Draw-Tite item # DT45518. This hitch is custom fit and bolts directly to your Ram 3500 with...
  view full answer...
• High Capacity Trailer Hitch For A 2020 Ram 3500 6-1/2 Foot Bed With Factory Trailer Hitch
  When it comes to raising the tongue weight capacity of your 2020 Ram 3500 I would recommend installing The Curt Trailer Hitch Receiver # C15801.The Curt hitch has a receiver opening of 2-1/2 by 2-1/2 inches and has a maximum tongue weight up to 2,700 pounds. I would recommend checking your vehicle's manual to find the proper towing capacity for your vehicle. Using this hitch with a weight distribution hitch will keep the weight ratings the same for this hitch. Using this hitch will install...
  view full answer...
• Weight of Curt Trailer Hitch C15801 For Ram 2500
  The Curt Trailer Hitch Receiver # C15801 for your Ram 2500 weighs 78 lbs.
  view full answer...
• What Is Tongue Weight Rating of Curt Hitch # C15801
  The Curt hitch part # C15801 that you referenced has a tongue weight capacity of 2,700 lbs and normally using a hitch adapter cuts that by 50 percent so you'd most likely have a capacity of 1,350 lbs but for a longer hitch extension the capacity reduction would be more and you'd have to check it to be sure. A lot of times they also have their own capacities as well so be sure to check that as well.
  view full answer...
• Will the Curt Hitch C15801 Be Compatible w/ TorkLift Tie Downs on a 2017 Ram 2500 w/a 6-1/2' Bed?
  It sure is James! Your rear TorkLift Tie Downs of item # TL35FV are going to reinstall by drilling holes in the sides of the Curt item # C15801 hitch. I linked an installation video below that shows this step at the 3:14 mark. The Curt Hitch item # C15801 is custom fit for the 2017 Ram 2500 with a 6-1/2' bed. It is compatible with or without the factory hitch. This is a class V hitch with a 2-1/2" receiver that has a 20,000 lbs towing capacity. What do you plan on towing with your new...
  view full answer...
• High Capacity Trailer Hitch Recommendation for a 2016 Ram 3500 Short Bed
  The Curt Class V hitch part # C15801 is a very high capacity hitch that has been confirmed as a fit for your 2016 Ram 3500 short bed. This hitch has a 2,700 lb tongue weight rating and a 20k lb trailer weight rating.
  view full answer...
• Part Needed to Reduce Hitch Receiver Size to 2-Inches for Pro Series WD System
  Equal-i-zer Weight Distribution Shank # EQ90-02-4900 fits into a 2-1/2-inch hitch like # C15801, so it is not a good choice for use with the Pro Series weight distribution system # PS49582. If you want to use this 2-inch system in a 2-1/2-inch hitch you can add a reducer sleeve # C45405 to drop the receiver opening size down to 2-inches.
  view full answer...
• In Bed Camper Tie-Downs and Second Receiver For a 2017 Ram 3500 Dually Rear End 6.5' Bed
  The Curt Trailer Hitch Receiver # C15801 is one of the more affordable options for adding a 2nd receiver to your 2017 Ram 3500. It will sit below and slightly in from the factory receiver. For the camper tie down this is one place where I have to recommend getting the frame mounted tie downs versus the more affordable bed mounted tie downs. You do not want to trust the thin sheet metal in the bed to hold all the weight of the camper in place. The TorkLift Front # TLD2131 and Rear # TLR3500...
  view full answer...

Do you have a question about this Trailer Hitch?