See what our Experts say about this CURT Trailer Hitch

• Will C11210 Cause Lowered 2012 Ford Mustang to Bottom Out
  Hey Caiden, The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11210 is rated for up to 2,000 lbs of towing capacity and 200 lbs of tongue weight. That does make it pretty easy to bottom out if you're using the hitch for heavy cargo like multiple e-bikes, but in my experience it hasn't been a point of trouble for our customers when using this hitch. When there's no weight on the hitch, it will sit pretty close to your bumper to avoid scraping the ground or sagging and it...
  view full answer...
• Do You Have a Tow Loop Ball Mount that Fits a 1-1/4" Receiver?
  No, I am sorry Tom we do not have a tow loop ball mount that fits a 1-1/4" receiver. The best option I can offer is a ballmount like the etrailer Ball Mount w/ Pre-Torqued 2" Ball item # e47DR. I would be reluctant to use your Mustang's hitch as a recovery point though. That hitch may not be capable of supporting the weight of your vehicle. Without knowing your year I can't say for certain but a class I 1-1/4" hitch only has a 2,000 lbs capacity.
  view full answer...
• Trailer Hitch Recommendation for a 2012 Ford Mustang GT
  All of the hitches that are available for your 2012 Ford Mustang GT will install in basically the same place and they will not stick out too far. I attached a picture of the Curt Hitch # C11210 installed on a vehicle that is similar to yours for you to check out to give you an idea how it will look. Since we do not carry the 1Up USA bike racks I can not speak on their behalf to confirm to you that it will work with a Class I hitch. Realistically it should, but you will need to find out...
  view full answer...
  
• What will the Curt Class I Trailer Hitch for a 2011 Mustang GT Look Like When Installed
  At this time we do not have a photo available of the Curt Hitch, # C11210, on a 2011 Mustang GT, but we do have a photo, see attached, of the hitch on a Shelby Convertible that should give you an idea of the look. The receiver portion of the hitch will be visible when installed. The rear fascia will conceal everything except the receiver. The Curt Hitch, # C11210, will require the use of some type of stabilization strap, like part # 18050, for carrying any non-trailer loads. If using...
  view full answer...
  
• 2013 Ford Mustang Hitch Options
  If you have a 2013 Ford Mustang GT or Non GT convertible, you can use either the Draw-Tite # 24863 or the Curt # C11210. These will both give you the same capacity, but one I recommend more than the other. I recommend getting the Curt as it has a hidden cross tube. I don't like seeing the crosstube of hitch receivers on cars and especially on sports cars like yours. I highly recommend getting the Curt for that reason. For wiring, you can use the T-One Vehicle Wiring Harness with 4-Pole...
  view full answer...
• Can 2014 Ford Mustang be Used to Tow Motorcycle Trailer
  According to the online owner's manual for your 2014 Ford Mustang you can tow up to 1,000 lbs. So if you can find a trailer that weighs under 1,000 lbs with your motorcycle loaded you will be just fine. I recommend installing the Curt Trailer Hitch # C11210 on your Mustang because it has a collar around the receiver which can be used for more stability in certain applications. For wiring I recommend the T-One # 118487 because of how reliable we have found the Tekonsha wiring to be. Then...
  view full answer...
  
• Recommended Hitch With Easy Install For A 2012 Ford Mustang V6
  We currently have two hitch receivers available for your 2012 Ford Mustang V6. They are the Draw-Tite Sportframe Trailer Hitch Receiver part # 24863 and the Curt Trailer Hitch Receiver part # C11210. As far as hitch installs go, you will not find many other vehicles with installation steps as easy as the Mustang's. Both the Curt and Draw-Tite have similar installation procedures, making it hard to say one will be easier than the other, as it will be basically the same from each manufacturer....
  view full answer...
• Trailer Hitch Receiver Fit for 2012 Ford Mustang Boss 302
  We do have a trailer hitch receiver I can confirm is a fit for your 2012 Ford Mustang Boss 302, which is from Curt: - Curt Trailer Hitch Receiver # C11210 I confirmed with Curt that this is a fit for your '12 Mustang Boss 302. Since this is a Class I hitch, if you are planning on using it for an accessory like a bike rack, you'll need a Class I-compatible rack such as the Swagman Chinook # S64683. Or, if you plan on doing some light towing with the Curt Trailer Hitch # C11210 and your...
  view full answer...
• Recommended Trailer Hitch for 1-1/4" Bike Rack on 2013 Ford Mustang Convertible
  The Curt Trailer Hitch Receiver part # C11210 which is a fit for a 2013 Ford Mustang Convertible does not require a stability strap, just the bike rack will be fine. It has a class I rating with 1-1/4" opening so any bike rack with a 1-1/4" shank will work great. The trailer hitch features a bolt-on install. Please note, you won't need any sort of wiring harness if you're just using the trailer hitch for a bike rack, that's only for towing and in which case you could use the Curt T-Connector...
  view full answer...
• Is There a 2" Trailer Hitch for a 2014 Ford Mustang
  The only trailer hitch options for a 2014 Ford Mustang are class I 1-1/4" like the Curt Trailer Hitch Receiver part # C11210 which is what I recommend. It can be adapted to a 2" using the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver part # HTAD but keep in mind this will reduce the weight capacity of the trailer hitch by 50%.
  view full answer...
• Recommended Bike Rack for Class I Hitch on 2013 Ford Mustang
  If you're installing a Class I hitch with a 1-1/4" receiver like the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11210 then you will need a bike rack that can be used on Class I hitches. I recommend using the Swagman Chinook Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount # S64683 since it can be used in Class I hitches with 1-1/4" receivers and allows you to carry bikes that weigh up to 45-lbs each. I really like that this rack comes with locks for the bikes...
  view full answer...
• Will The Curt Class I 1-1/4 Inch Hitch # C11210 Fit A 2011 Ford Mustang GT
  As long as your Mustang is not a California Special, Shelby GT or a GT500 model, then yes, the Curt Class I Trailer Hitch, # C11210, will fit. No drilling is required to install and the exhaust must be temporarily lowered to raise the hitch into position. I have attached an installation video for you to check out. If you will be using the Curt hitch for non-trailer loads like a hitch bike rack then you will need to use a Curt Stabilizing Strap, # 18050. One end of the strap will attach...
  view full answer...
• Is the Yakima HoldUp Replacement Shank # 8880581 Compatible With Draw-Tite Receiver on 2014 Mustang
  Normally the Draw-Tite Sportframe Trailer Hitch Receiver # 24863 is the hitch receiver that I would recommend for your 2014 Ford Mustang, but since you are wanting to use the Yakima HoldUp with a 1-1/4 inch shank, like part # Y02445, you will need to go with the Curt Trailer Hitch Receiver # C11210 instead. Keep in mind that the Curt hitch receiver requires the use of a Support Strap # 18050 for all non-trailer loads per the Curt warranty. The reason that I recommend the Curt in this...
  view full answer...
  
• Availability of a 2" Trailer Hitch Receiver For Carrying a Bike Rack With a 2013 Ford Mustang GT
  Currently there are only 1-1/4" receivers like the Curt # C11210 which are custom fit for your 2013 Ford Mustang GT. Since you are not wanting to use an Adapter # e93YR you would need to have a custom hitch fabricated. It would likely be easiest to get the Curt and have a 2" Receiver # E-9 welded on. Do be sure to add gussets for additional strength to the receiver to secure it in place. Do note there is no way to give this type of custom receiver a specific weight rating and it would void...
  view full answer...
• Will a Trailer Hitch Fit a 2012 Ford Mustang V6 with Aftermarket Flowmaster 40 Exhaust
  Hitches are only tested on stock vehicles. The only way to know for sure if Curt trailer hitch # C11210 will fit with the aftermarket exhaust is to test fit it. But if the aftermarket exhaust is the same shape and diameter tubing as the stock exhaust and takes the same path then it is likely the hitch will fit.
  view full answer...
• Recommended Ball Mount For 2012 Ford Mustang V6 Towing Trailer W/ 17" Coupler Height
  Where we installed the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11210 on a similar 2014 Ford Mustang V6 we found that from the ground to the top inside edge of the receiver measured 10-1/2". As long as the tires on your 19" wheels are the same overall height as the factory tires on your Mustang, this measurement will be the same for your vehicle. I recommend the Curt Class I Drawbar - 5" Rise - 11-9/16" Long - 2,000 lbs # C45025 as this is the most rise available...
  view full answer...

Do you have a question about this Trailer Hitch?