What is the Diameter of the Hitch Pin Hole in the Curt Trailer Hitch Receiver # 13241

Question

Question:

What is the pin diameter for the hitch pin for Curt # 13241

asked by: Sherrill H

0

Expert Reply:

The diameter of the hitch pin hole for the Curt # 13241 trailer hitch receiver is 5/8 of an inch.

A Pin and Clip, like part # C21500, is designed to fit into the hitch pin hole. You can use part # e98882 for an option that locks.

expert reply by: Jon G

0

Answer 1

Thank you for your purchase of the Kuat NV 2.0 Bike Rack #NV22G! When it comes to lighting I have an alternate solution to what you're asking with the following parts: Curt Auxiliary LED Indicator Lights - #C53201 Thule License Plate Holder for…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 6

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 7

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 8

It sure is Rob, and congrats on the new SUV. The Oris Trailer Hitch with Detachable Hitch Receiver item #TS76VR is definitely comparable to the Stealth Hitches item #SH87FR. It's got the same kind of removable receiver that works great with a…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

Hey Doug, I checked with Curt and their hitch part #C58VV is a confirmed for all models of the 2026 Lexus RZ350e including the electric model so it would work great for you. Do you have a bike rack already? What kind of bikes do you have?

view full answer...

Answer 11

Hey Tanner! These hitches are all pretty similar so it can be hard to decide between them. If I were you I would choose the Curt #C77MJ over the other two. The Curt #C77MJ and etrailer #e84ZV actually share the same design, and both have the…

view full answer...

Answer 12

No, it will not Bryan. The Redarc Tow-Pro Link item #RED57AR requires a USCAR port that comes with factory tow packages. The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item #SH25VR, that fits your 2023 BMW X5, does not have this…

view full answer...

What is the Diameter of the Hitch Pin Hole in the Curt Trailer Hitch Receiver # 13241

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching