See what our Experts say about this Swagman Trailer Hitch Lock

• What Is The Thread Pitch Of The Swagman Anti-Rattle Hitch Pin Lock S64027?
  I had our warehouse measure the thread pitch of the Swagman Anti-Rattle Hitch Lock # S64027 you were looking at and it has a 5/8" x 11 thread pitch. We do have the Threaded Anti-Rattle Hitch Pin Lock for etrailer Cargo Carriers # e99047 which has the M16x2.0 thread pitch you were looking for. If you can tell me what you are looking to use the pin in I may have other options for you as well. I included a video of the # e99047 for you to take a look at.
  view full answer...
• Will the Replacement Anti-Rattle Hitch Pin Work w/ a Toyota 2" Receiver?
  Hey Tony. The Replacement Anti-Rattle Hitch Pin for Curt Bike Racks item # C82NR is only 3.8” long so it's not going to work with that wider 2" receiver Toyota has decided to go to. If you're needing a new locking anti-rattle, threaded hitch pin for your Swagman E-Spec Bike Rack item # S94FR, you'll want item # S64027. This was designed in response to that Toyota hitch and has a 4-1/2" insertable span. Is this what you're needing the hitch pin for?
  view full answer...
• Difference in Dimensions Between P313 and P333 Hitch Receiver Insert for Swagman Bike Racks
  I went out to our warehouse and took some measurements for you. The # P313 Replacement Receiver Insert measures 1.31 in x 0.87 in while # P333 measures a bit smaller at 1.30 in x 0.75 in. See the attached images. # P313 is designed to replace the original insert in these Swagman hitch mounted bike racks: Swagman XC # S64650 Swagman G10 # S64682 (discontinued) Swagman Trailhead # S63360 # P333 is designed to replace the original insert in these Swagman hitch mounted bike racks: Swagman...
  view full answer...
  
• What To Do If A Swagman Bike Rack Fits Loosely In The Trailer Hitch Receiver And Has Wobble
  I understand your concern and annoyance with the Swagman Original - 3 Bike Rack # S64152-2 fitting loosely in the hitch receiver and causing bounce/wobble. This can happen due to the fact that not every trailer hitch receiver is made to the exact same dimensions. Luckily, there is a perfect solution for this! You will need to install the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks # S64027. Not only will this lock your bike rack to the receiver, but it will also...
  view full answer...
• Recommended Locking Hitch Pin Compatible w/ the Threads on the Swagman Swivel Hitch Extender
  Hey Michael, the threaded hitch pin included does not have a optional lock. To add a lock to the Swagman Swivel Hitch Extender item # S86SR you'll want the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks item # S64027. This locking hitch pin comes with the same threads to match the ones built into the hitch extender. It's overall length is 7-1/8" and the usable length is 4-1/2". This hitch pin will work if you have the wider 2" Toyota hitch receivers. What kind of vehicle...
  view full answer...
• What 4-Bike Bike Rack do You Recommend for My 2021 Grand Design Fifth-Wheel Trailer?
  I have the answer! You are 100% correct when saying that the Swagman XTC4 Bike Rack for 4 Bikes - 2" Hitches # S64665 is rated for motorhomes and not fifth-wheel. The reason why is because there is much more force/torque exerted on the rear of a fifth-wheel than a motorhome. Unfortunately, the XTC4 does not work on a fifth-wheel trailer application. Also, even if the XTC4 could work, there is only a 3-1/2" distance between the center of the shank's pinhole to the closest part of the rack...
  view full answer...
• Recommended Trailer Hitch And Hitch-Mounted Bike Carrier For 2010 Toyota RAV4
  The hitch I recommend for your 2010 Toyota RAV4 is the Curt Trailer Hitch, part # C13149. This is a Class lll hitch and has a 2 inch receiver opening. I have attached a link to an installation video for this hitch on a RAV4 you can take a look at. As the video shows, there is a measurement of about 6 inches from the hitch pin hole to the back of the spare tire cover. We will use that measurement for making a recommendation. I have attached a link to a helpful article that explains how...
  view full answer...
• Recommended Anti-Rattle Trailer Hitch Receiver Lock for Wider Toyota Factory 2" Hitch Receivers
  Hey John. The XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches item # SHP2040-XL fits the wide factory 2" Toyota hitch receivers. We've actually had a customer use this anti-rattle lock on a 2024 Tundra and I have attached a picture below from the review they sent in. Please note that this anti-rattle lock can only be used with hollow-shank ball mounts like item # BWTS10038B and hitch accessories. What are you using your hitch for?
  view full answer...
• Solution for Needing Replacement Hitch Pin Bolt for Swagman Escapee
  Hey David, for your Swagman Escapee the only solution we have is the threaded hitch pin lock # S64027 which comes with the lock cylinder as well as a new hitch pin. We don't have just the bolt portion.
  view full answer...
• Replacement Bolt for Hitch Lock with 1/2-13 UNC Thread
  Threaded hitch pins are usually brand-specific and match the threads in the shank portion of an accessory item like a bike rack, for example. We have 16 different threaded-bolt locks for 2-inch hitches, shown on the linked page. Thule offers a replacement bolt # 8537012 that matches your description.
  view full answer...
• Is Replacement Key Avaialble Separately for Swagman Hitch Bike Rack
  Individual replacement keys are not available from Swagman, so in order to replace one, you'll need to purchase the lock, which will include a pair of keys. If your Swagman hitch bike rack uses a dedicated 2" shank, the correct lock is part # S64027 (4-3/8" span). If your bike rack uses an 1-1/4" or 1-1/4" with 2" adapter, the correct lock is part # S64029 (4-1/2" span). I've attached a video link for each lock that goes into more detail about the dimensions of each.
  view full answer...
• Solutions For Replacing The Anti-Rattle Bolt On Rola Dart Cart Carrier
  We do have options however the Rola Dart cargo carrier is discontinued. The carrier used a specific threaded hitch bolt which is no longer available. We confirmed with Rola that the threading of the pin can be either 7/16 inch-14 or 5/8 inch-11. You can try to match up the bolt at a local hardware store. Another option would be to drill out/remove the nut inside of the Rola's shank and then use the Universal Anti-Rattle Trailer Hitch Lock # 63232. If you have any other questions please...
  view full answer...
• Cannot Remove Hitch Lock On Swagman Dispatch 2 Bike Platform Rack
  If you leave the hitch lock for the Swagman Dispatch 2 Bike Platform Rack part # S44FR on for too long or there has been dirt that has gotten inside the lock core then there is a possibility that the lock can get stuck. I recommend that you spray some lubricant around the head and then gently hit the head with a hammer to try and break it free while also turning the key back and forth. If all else fails then you will need to drill out the lock or cut off the head. This can then be replaced...
  view full answer...
• How to Carry Four Bikes and Tow Pop-Up Camper
  The best option, assuming your pop-up camper is an A-frame, is to use the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275 with the Swagman # S64940. The way it works is the Bike Bunk will get mounted on your A-frame and then the Swagman rack mounts inside the Bike Bunk. The other option is to install a trailer hitch on your camper, the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703 which works on box frames, C-channel...
  view full answer...
  
• Recommended Replacement Hitch Pin For The Swagman XC2 Bike Rack
  Yes, we have the Replacement Threaded Hitch Pin and Clip for 2" Shanks on Swagman Bike Carriers # P5901 or the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks # S64027 if you'd like more security to ensure no one takes off with your Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount # S64663.
  view full answer...
• Is There a Threaded Hitch Bolt Lock Compatible with Rola Carrier?
  The Rola Carrier uses a threaded anti-rattle bolt that is 5/8 inch and 11 threads per inch. The Swagman # S64027 and the HitchMate # HE6001 unfortunately will not fit. You will either need to use a different lock like a cable lock or drill out the threads and use an alternative method like the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span # 63232.
  view full answer...
• Longest Span Hitch Pin Lock
  The closest option we have available to what you are needing is the Blue Ox Trailer Hitch Receiver Lock item # BX88212. This heavy-duty lock features a 5/8" diameter and a usable length of 4-3/8". This usable length represents the longest option we have available for standard locking hitch pins. I have linked a diagram below. We do have a threaded locking pin that spans 4-1/2" but it is for a bike rack. It is the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks item # S64027.
  view full answer...
  
• Replacement Anti-Rattle Trailer Hitch Pin for Bell Hitchbiker 2 Bike Rack
  We don't have a confirmed fit for a Bell bike rack. Based on the information your gave, I recommend the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks # S64027. If you don't want the lock, then you can use # P5901. These pins are 5/8 inches diameter. The bike rack manufacturers all use different threads, but your rack looks very similar to the Swagman Trailhead fixed base rack. if that doesn't fit your rack, you may want to consider drilling out the threaded...
  view full answer...
• Socket Size for Swagman Anti-Rattle Locking Hitch PIn
  Possibly, it depends on what you have. I tried a few different socket sizes on the Swagman locking anti-rattle hitch pin, part # S64027, and found the actual fit to be a 23 millimeter which is a fairly uncommon size to use. You might be best using an crescent wrench instead. The same is for the case with the pin included with part # S64030.
  view full answer...
• Replacement Option For Reese Outfitter 4-Bike Rack For 2 Inch Hitch
  There is not a replacement hitch pin for the old Reese Outfitter bike rack, and the hitch pin you mentioned won't work with the rack, so if you are missing yours, or the hitch pin is damaged to the point that you can't use it with the Outfitter then you would need a replacement rack. The good news is there is a similar, cost-friendly option for you: - Swagman 4 Bike Rack for 2" Hitches # S64940. The # S64940 4-bike rack is easy to use, with simple rotating cradles. It also comes with...
  view full answer...
• Replacement Bike Rack For Reese Outfitter That Can Be Used on Camper
  The Reese Outfitter 4 is an older bike rack produced by Swagman which is now the Swagman Original 4 Bike Towing Rack for 2" Trailer Hitches part # S64675. The Swagman Original 4 Bike Towing Rack for 2" Trailer Hitches is rated for use on the back of Motorhomes but not campers or fifth wheels. If you need a bike rack for use on the back of a trailer or RV, I recommend the Swagman Trailhead 4-Bike Rack for 2" Hitches # S63381. This bike rack can carry 4 bikes on the back of a fifth wheel,...
  view full answer...
• Recommended RV Rated Bike Rack to Carry 4 Bikes
  You're correct we have several options of RV rated 4-bike racks that I've linked on this page. The most economical rack is the Swagman XP # S64940. It is a good rack that is rated for fifth-wheel usage. It has rotating cradles that help when using it with alternative framed bikes. It includes a locking knob to deter bike theft and the hitch lock can be purchased separately with the Locking Anti-Rattle Threaded Hitch Pin # S64027. Some people also like to add a ratchet and socket to...
  view full answer...
• Can the Locking Threaded Hitch Pin for Swagman 2" Hitch Racks Be Ordered with Specific Key
  The Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks part # S64027 will come with a unique key code, it does not have the ability to be ordered with a specific code unfortunately. The only option Swagman offers for keyed alike locks (when purchased separately) is the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks part # S64030 which comes with a bike and hitch lock.
  view full answer...
• Locking Anti-Rattle Hitch Lock For Nashbar Bike Rack That Uses a 1/2" - 13 Thread Pitch Bolt
  I recommend the Anti-Rattle Hitch Lock # SR0901 as it has the same 1/2" - 13 thread pitch that you current bolt has. Included with the hitch lock are 2 keys a washer and lock washer to ensure that it does not loosen on you when it is in your receiver. The Swagman Locking Anti-Rattle, Threaded Hitch Pin # S64029 uses a 1/2" -12 thread pitch and the Swagman Locking Anti-Rattle, Threaded Hitch Pin # S64027 is a 5/8" thread. So they will not work for your application.
  view full answer...
  

Do you have a question about this Trailer Hitch Lock?