Product Experts Available Now!
Call 1-800-940-8924
2" Hitch Ball - 1" Diameter x 3" Long Shank - Zinc - 5K
(236 reviews)
Price: $36.23
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (236)
- Q & A (0)
- Videos (2)
- Photos
- Used (1)
Brophy Trailer Hitch Ball - CB84Z
- Trailer Hitch Ball
- 2 Inch Diameter Ball
- 1 Inch Diameter Shank
- Standard Ball
- 5000 lbs GTW
- Coated Steel
- Brophy
Zinc-plated hitch ball has a 1" diameter x 3" long shank. Wrench flats ease installation. Zinc-plated finish resists rust and corrosion.
Features:
- Hitch ball provides a connection point for your trailer's coupler
- Durable, solid-steel construction
- Zinc-plated finish resists rust and corrosion
- Wrench flats allow you to use a wrench to hold the ball in place during installation
- Lock washer and nut are included
- Made in the USA
Specs:
- Ball diameter: 2"
- Shank dimensions: 1" diameter x 3" long
- Weight capacity: 5,000 lbs
CB84Z Brophy 2" Hitch Ball - 1" Diameter x 3" Long Shank - Zinc Plated - 5,000 lbs
Video of 2" Hitch Ball - 1" Diameter x 3" Long Shank - Zinc - 5K
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for In-Depth Review of the 2" Hitch Ball
Today we're going to take a look at Brofee 00:00:02 Zinc Plated Two-Inch Ball with the 5,000 pound weight capacity. Now this hitch ball provides a nice connection point for your trailer's coupler. It's made of a durable solid steel construction, has a zinc plated finish to help resist rust and corrosion. Does include the lock washer and the nut for installation. It is made in the U.S.A. The ball diameter on this is two inches.
A few shank dimensions, the length on the shank is right at three inches. The diameter on the shank is right at one inch, and again, the weight capacity which is stamped on the top is 5,000 pounds so when you go to install this, you'll just drop this hitch ball with the shank down through the hole in your ball mount, go ahead and put your lock washer on, and then go ahead and put your nut on, and then just torque that down to the correct specs to hold it into place.That should do it for the review on the Brofee Zinc Plated Two-Inch Hitch Ball with the 5,000 pound weight capacity.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.8
236 reviews
by:
Azad
11/01/2017
It's hard to find a ball with a 3+ inch shank, which I needed in order to go all the way through the bumper hitch of my T100. Additionally, i placed my order late at night and was able to call in the morning directly on the phone and change my order before it shipped. That is EXCELLENT service.
by:
Curt
09/09/2021
Professional, courteous, and very helpful. etrailer were extremely responsive and helpful to get the trailer hitch, and associated other items, shipped to me in a timely manner. Excellent service!
by:
Jon
08/01/2024
This was a difficult hitch to find. The 1" x 3" shank is kinda an oddball. Was looking for a 1" rise, but couldn't find it anywhere. This hitch had a slightly different shape than most, which gave me about a half inch rise. It will work very well. Thank You Thank You
by:
Nat S
06/05/2020
The install was super easy after watching the videos. We used it frequently on group camping trips to haul all our gear and our families gear. I am was happy that I got to install it myself.
by:
Thomas
11/19/2022
by:
Steve
09/03/2026
by:
Bob
03/26/2026
by:
Brent
04/17/2023
by:
Jim P.
08/05/2014
CB-20Z Hitch Ball 2" x 5/8" x 1 5/8"...It was very hard to find a short shank 2" hitch ball with 5/8" threaded end. Lawn mower only had 5/8" hole with no material to enlarge for larger size without severely weakening hitch plate. Thanks etrailer.com for having this CB-20Z Hitch Ball in stock.
Jim P.
8/5/2015
The mounted CB-20Z Hitch Ball has been working great!
by:
Carl
04/24/2026
Beautiful product! Service from this company was second to none. Originally shipped product got lost in transit. Company replaced the product and shipped it to me express. Received it two days after replacement shipment. Very much appreciated!!
by:
Jake
06/12/2013
Did you know most stores dont sell a 2" ball with a 5/8" shank? Well, Etrailer does. I just needed to move my little 5'×8' flat bed trailer around with my mower. This trailer ball fit my needs perfectlyand was shipped lighning fast...as usual..awesome service and product from Etrailer.com...thx guys!
by:
Michael
05/03/2020
I had installed a hitch on my Kubota ZD 1211 mower. So I could pull a log splitter and small utility trailer. Ball showed a day early and was as stated. Second time ordering from etrailer. I will continue to use you guys. Thanks.
by:
Thorne
08/02/2018
Got this for flat towing my Jeep. I was unable to find a solid and economical 6" rise hitch so I got a 5" rise hitch and this 1" rise ball. Very nice combination! Just what the Dr. ordered. Thanks etrailer!
by:
Cindy
07/02/2014
Just what I was looking for...fits perfectly. Hard to find 2 inch ball with 5/8 inch diameter shaft. Quick service.
by:
Frank
05/31/2015
Was glad to locate this hard to find hitch ball to fit my Husqvarna mower. Everybody has them with 3/4 shanks, but I needed a 2 inch ball but with a 5/8" threaded shank in order not to have to ream out the mount hole on the mower which would make it even weaker than it is. I need it to tow my utility trailer across the yard to where I park it, so as not to drive my truck on the yard. The ball is described as zinc plated but it is about as shiny as chrome.
Frank
5/31/2016
I still think this is a chrome ball. It has not rusted and it is still on my riding mower to use sometimes to move my utility trailer across the yard.
by:
E
04/24/2026
Exactly what we needed
by:
David
10/11/2025
Worked perfect, just as designed!! Etrailer is awesome!!
by:
ofer N.
04/01/2014
great but hard to find size,got this specifically for my lawn tractor , now i can pull my boat and trailer around the yard, without the weight of my truck. shipping was very fast and payment made easy. thanks etrailer.
Ofer N.
4/1/2015
as good as the day i bought it
by:
Mark (Erie, PA)
08/09/2025
It was hard to find a 5/8 diameter, and with a short shank on top of that. They shipped it out within hours, but it took 6 days to get here by USPS …which I am not a fan of. I will check here first in the future.
by:
DAS
07/14/2016
Hard to find a 2" ball on a 5/8" shaft. etrailer has it all. Placed it on a riding mower to pull a 5X8 utility trailer for hauling brush. It is installed but I have not used the trailer yet. Good webpage and fast service.
Das
7/14/2017
I know my contact was computer generated but this is the first time I have ever been contacted one year later to check on my purchase. First class vendor.
by:
lehilon
06/26/2017
I was happy to have found this little gem online, as no store around here has anything like this. The 5/8" shank fits my 4wheeler, so I can use a small trailer that has a 2" connector for work in my yard.
Lon S.
6/26/2018
It has worked well for the past year. No issues, I just hitch it up and go!
by:
Brian
08/30/2016
I looked locally in 7 different stores for this ball hitch. It needed to be 5/8 inch diameter on the shank to fit a lawn mower. This was a hard to find part locally and I located it on etrailer.com. Thanks for the quick service.
Brian
9/1/2017
Great!
by:
Ron C
06/01/2015
I have been searching for a trailer ball with a 1/2 inch shaft for a long time and came upon your web site and you had them. It was easy to place my order and it was shipped right away. thank you
ps very well made product
ps very well made product
Ron C.
5/31/2016
Its held up extremely well . Thank you once again for having this product.
by:
Kenny
07/29/2015
I purchased this for use on a new lawn tractor that was made with a 5/8" hitch hole for towing. This hitch ball fit the hole, was easy to install, and is well constructed. I am now able to tow my utility trailer in the yard by it's 2" hitch . etrailer is the only place that I could find this, and their service was great!
by:
Jeff
06/24/2018
This trailer ball was supposed to be a Brophy brand made in USA, but there are no product markings on the ball other than the size (2”). Anyway the nut fits way looser than normal on the threads. Whoever machined it needs to improve their quality control.
Heather A.
1/18/2019
The only ball stamp you will typically see on the brophy balls is the size on the top of the ball. The ball is made in the USA and is cut from one piece of steel.
25
236
true
Show More Reviews
See what our Experts say about this Brophy Trailer Hitch Ball
- Torque Spec For Brophy 2" Hitch BallThe standard torque spec for a 2" hitch ball like part # CB84Z is 250 foot lbs.
view full answer... - Recommended Hitch Ball With A 3 Inch ShaftWhen it comes to a 1-7/8 inch ball or a 2 inch ball with a 3 inch shaft we do not have any stainless steel options. We do have the Chrome in a 2 inch # C40020 and in 1-7/8 inch # C40017. We also have the 2 inch Zinc coated # CB84Z. We do have The 2 inch Hitch Ball - 1-1/4 inch Diameter x 2-5/8 inch Long Shank - Stainless Steel - 10K # C69FR that may also work for you. I attached a review video link below.
view full answer...
Do you have a question about this Trailer Hitch Ball?
Used Items Available
Condition: Surface Scratches
Notes: There are scratches on the item. Otherwise, new and unused.
Info for this part was:
Installed by:
Jeff D
Video Edited:
Chris R
Written by:
Wilson B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thomas
11/21/2023
Good product!