Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Chrome hitch ball has a 1" diameter x 2-1/8" long shank. Wrench flats ease installation. Chrome finish is attractive and resists rust and corrosion.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Now, to install your ball, what we're gonna do is remove the nut. You got a lock washer that comes with it. That's gonna go underneath. So we'll put that in position here. Depending on your ball mount, one thing to make sure you check is the diameter here is gonna match the one you have on your shank so the ball will fit in there. We have an inch diameter here on this, so it's gonna work just fine.
So we'll put a lock washer or not here on the bottom. Now I'm gonna do it hand tighten to get it started. And there's two different ways you can do this. Now, if you have a vice, you can put the ball on the vice you can see there's flat ends here on the side of the base of the ball. It'll grab onto there and then you can use a wrench or a socket like we have to tighten that down.
And if you don't have a vice, you can still use your hitch like I have it set up here. You can do it this way, or we recommend you can flip it to the side like this, and it's gonna be easier to hold the wrench on this side, or I'm sorry. Hold the wrench on this side and then put the socket on this side. Now, if you don't and have a torque wrench, we do sell those on our website. So I'd pick one of those up, it's gonna make this easier to tighten down the ball and I'm just gonna go like this and slowly start tightening it down.
And you wanna do this until it hits those torque settings and you'll find that in the instructions that come with your ball. So make sure you hit those. Once it's torqued down, there you flip around, pin it, and then hook up to your trailer. With the ball set up and ready to go, some things to look at with it would be look at what size the ball is, gonna be a two inch ball, also has a chrome finish on there to protect against rust and corrosion. So it's gonna hold up.
You can see we've hooked it up to a couple different trailers though, and it's scraped off just a little bit, but I think that's just gonna happen the more you use the chrome ball. Another thing keep in mind is the trailer weight rating. So you always wanna go with the lowest of those numbers. Now, what I mean by that is you look at my hitch and my hitch is 4,000 pounds. It's rated for that. And then the shank is gonna be ready for 6,000 pounds. And the ball is rated for 8,000 pounds. Now, what that means is we're gonna go with the 4,000 pound trailer rating that my hitch gives 'cause that's the lowest number. Now I did mention that it's a two inch ball. So make sure you go look at your trailer that you want to tow, look at the coupler and it says it right there on it somewhere, right now I can show you one. It says it right here on top. It tells you it's a two inch ball. If you happen to look at your coupler and see it says two and five sixteenths that's okay. We sell those size balls as well, so just look at our website and order the one that's right for your coupler. This is an example of an inch and seven eighths coupler right here. So if you have that size we also offer the ball that fits in there too. And when it's time to hook up your trailer you can just set it down on the ball or lower the jack so it sits in the place. The coupler will go over the ball like that. You should be able to throw the latch and that locks it in and see I can lift up, it's not popping back off and we'll go ahead and replace our pin and our latch. And once you've got everything else all hooked up you're ready to hit the road. Overall, you're gonna need a ball if you plan on towing something. So this is gonna be a good two inch ball, it installs really easily, much like all of them do but this is gonna work with that two inch coupler. So just make sure you get that size right before you order it. Well, I think that does it. Thanks for hanging out and I hope this helps..
Average Customer Rating: 4.8 out of 5 stars (524 Customer Reviews)
Chrome hitch ball has a 1" diameter x 2-1/8" long shank. Wrench flats ease installation. Chrome finish is attractive and resists rust and corrosion.Looks good but some how I got the idea that this was made in USA- paid twice as much to get USA made and is stamped made in China.
No complaints, does the job
Haven't used this because my trailer is 2 5/16 but it seems legit.
I am truly amazed by the customer service from Etrailer. I ordered a hitch, ball and hitch plug with standard shipping on Thurs around 11 am. Their pricing was lowest I found. My order arrived the following day. I wish all my orders from other websites were so efficient. I will be using Etrailer.com again. Thank you!
Does the job but chrome does wear off.
It is very difficult to bit etrailer quality parts and prices .! And once you reach the $50.oo
you get the free shipping and that is just Perfect .!
That is why I always organize my purchases the best I can so I can have the Free Shipping, And make the best deal .!
Very good service time, I think the steps will well on my Rual King RK24 tractor.
Great product. As advertised perfect for my application.
Looks like a good product. I purchased two. I plan on getting 2 more receivers with a 3" rise and will be purchasing another one of these and one in 2 5/16 from Brophy as well.
Awesome made in the usa. Better than the chinese junk.
Super sturdy well made hitch ball.
It's fine--it's a hitch ball
Arrived a day early. Good quality. Product as described.
Just received a couple of days ago so haven't used yet but sure it will work good.
Came in the time frame as stated. Workmanship looks very good. No problems on installing. Just what I needed.
Looks very good.
Very nicely manufactured and constructe d.
excellent service fast shipping good qu ality.
timely delivery/quality product
Great products, great service
Good product . Quick ship
super
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victor P.
8/8/2021
yes, very well