Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
Item # RM-15267
Our Price: $145.96
Confirmed to Fit
2012 Toyota FJ Cruiser
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1257)
- Q & A (0)
- Photos
2012 Toyota FJ Cruiser - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
Diode kit allows you to use your Ford Ranger's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.
Features:
- Lets you wire your Chevrolet Silverado 1500 to accept your RV's tail, brake, and turn signal lights for flat towing
- Wires towed car as combined system so that brake and turn signals travel along same wire
- Prevents electrical feedback and the damage it can cause to your Chevrolet Silverado 1500's electrical components
- Diodes powder coated aluminum case is corrosion resistant and provides protection from the elements
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Flexo-Coil cord is resitant to water, oil, chemicals, and has silicone-injected plugs to prevent corrosion
- Center pin on 6-Way plug wired to 12V power, there are two industry standards
- Includes:
- 4 Hy-Power diodes
- 4-Wire harness
- 27" Long
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- 8' Coiled cord
- Vehicle mounting bracket
- Socket
- Made in the USA
- Limited Lifetime Warranty
Specs:
- Diode Max amperage: 85 amps
- Diode Max voltage: 24 volts
- Coiled cord max length: 8'
- Coiled cord retracted length: 15"
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes (RM-792) will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these Chevrolet Silverado 1500s have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your Chevrolet Silverado 1500 will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your Chevrolet Silverado 1500 as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
15267 Road Master Towed Car 4 Diodes RV Plug to 6-Wire Socket Flexo Coil Wiring Kit
Installation Details
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit - RM-15267
Average Customer Rating: 4.8 out of 5 stars (1257 Customer Reviews)
Diode kit allows you to use your vehicle's tail lights and wiring system while preventing feedback from your RV. Wires 2-wire and 3-wire systems to operate as a combined lighting systems. Includes 7-wire to 6-wire Flexo-Coil electrical cord.by: Dale04/13/2023
2014 Chevrolet Spark
Very complete kit. My only problem mounting it in a 2014 Chevy Spark is the limited space for the diodes. After much trial and fitting I found a suitable location. See photo.
by: Ken05/17/2024
This item was recommended by Jameson once he saw what I was planning to order for the tow bars and brake system. It was installed by a shop on the etrailer authorized installers list, along with everything else for the entire towing system. It does attach to both vehicles just fine, although at first I wasn't sure it was fully attached on the motorhome side. I was afraid it would just slide back out, but it hasn't.
by: Mike R.03/19/2024
Finished wiring and first effort to plug in red flex coil to the Jeep and the outside protection cover broke apart; very disappointing. Trying to contact Etrailer for replacement.
by: Gary04/12/2024
Haven't installed it yet, but the kit seems to include everything I need. My contact at etrailer did a great job of getting me exactly the right parts to complete my flat tow package, and the videos available on the web site to help with installation are a great feature. I don't think I would tackle this installation myself without all of the helpful information these folks provide.
Jenny N.
4/13/2024
Thank you for reaching out! I would love to see pictures and how your trip went once it is installed. Happy Trails Gary.
by: Fritz 04/26/2024
This seemed unnecessary but is really the only proper solution when working with LED taillights. It works perfectly.
by: John05/17/2024
This kit worked out well. It contained everything needed to tap into my vehicles lights and continues to be trouble free after a year of use.
by: Timmy04/11/2024
Jeep Wrangler
I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver.
I am 63 and I can connect/disconnect this in 5 minutes.
by: Aaron03/31/2024
GMC Sierra
The wiring kit does what it is supposed to do. I would like to see all of the terminal connections to be the marine grade heat shrink type with the solder inside. The type that join the wires with a heat-gun. I installed this in a 2024 GMC Sierra Denali 1500. I chose to mount the connector by drilling an hole through the plastic front license plate. This will be covered with a flip-up license plate frame. All-in-all, I would purchase this set again.
by: Greg 02/23/2024
2011 Jeep Wrangler
The video instructions made this harness very easy to install (other than routing the wire to the back of the Jeep). Everything functions as it should. I'm very happy I went with this harness versus magnetic lighting.
by: Dan 02/10/2024
I have to say : E trailer always delivers !
This is exactly what ya need if you are adding a second vehicle or swapping your old system to a new rig. I could have gotten by without the plug but for the price decided I should get a spare.
Delivery was prompt and product was exactly as described.
by: Michael 02/02/2023
2014 GMC Sierra
great complete wiring kit for my 2014 gmc sierra 1500
Michael
2/2/2024
flawless
by: Tim 12/12/2023
2011 Jeep Wrangler
We added this kit and tow cable to keep our Jeep battery charged while towing, so the supplemental brake could stay powered. It has worked well for us for several long trips from GA to NH and MI. The Jeep side of the tow cable ended up with a crack in the metal plug, but we were able to get a replacement plug and rewire it pretty easily. We are going to complete the wiring for the tail lights before our next trip.
by: roparv03/06/2023
Installed as per video...I had a local car/truck accessory shop install mind as way too many facial screws for me to content with. $400 to have it done right.
(A little worried that if I get too close to a vehicle or wall that some damage my occur as cable connector and braking wiring sticks out 3-4 inches from front of car.) My older system was cleaner design across the front of the car.
by: Gary12/06/2023
My Roadmaster Sterling tow bar has a channel for the wiring kit to run through. the coiled wire is not easy to work with on this bar if you want it to run through the channel. 10 months into using it the 6 wire end disintegrated and had to be replaced. luckily we were camped right beside a Camping World.
by: Jaime04/17/2024
The best customer service. The really know all about rv accessories
by: Jordan 01/05/2024
2009 Ram 2500
A bit of a learning curve for first time dyi on this type of thing. Key is to make sure you figure out what type of brake light systems you have. There are 2 types and 2 different wiring diagrams. Read directions thoroughly. Works well. 2009 dodge 2500 install
by: Rob 12/13/2022
Works as advertised. Installation takes some time but instructions were very good. No complaints.
Rob
12/14/2023
Still working fine.
by: Lloyd 03/27/2024
I have had no problems with wiring kit. it works well on my Ranger'
by: Timothy02/15/2024
Works good. Reasonably easy to install. The diodes are large and you have to get them 'just so' behind the tail lamp assemblies to get the lights to seat properly.
by: Terry11/14/2023
Just wanted everyone to know, that after one year of owning and using the Roadmaster towing baseplate, and the wiring harness for my 2022 Ford Maverick, I have accumulated over 10,000 miles of trouble free towing behind my Motorhome. The folks at etrailer did a great job making sure I had the right parts and at a good price. Delivery of the parts was exactly the day it was promised. I highly recommend them when need these kind of parts. I really appreciated the great and friendly service!! Safe travels
by: Michael 03/25/2024
Shawnee provided excellent service on the phone order, delivery was prompt and the installation videos were excellent!
by: Richard 02/10/2024
Roadmaster
The roadmaster connection kit for our brake system on our toad has worked perfectly.
by: Skid Lid01/24/2024
Project went as expected. I did purchase additional split loom from Harbor Freight to protect the wires from the front to the rear of my truck. It easily ran inside the frame rails!
by: Joel 04/24/2024
excellent kit and installation video
by: Ellen 04/10/2024
Roadmaster is the best...worth waiting for
25
1257
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Parts Needed to Flat Tow 2012 Jeep WranglerFor your 2012 Jeep Wrangler the Blue Ox base plate kit part # BX1126 is a confirmed fit and would work well with the Tow Bar part # BX7322. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This...
view full answer... - Parts Needed to Flat Tow a 2016 Jeep Wrangler Unlimited Using D-Ring Adapters RM-035-1The Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick Item # RM-035-1 are compatible with all Roadmaster motor home mounted tow bars. The latest and greatest is Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights - RV Mount - 8K Item # RM-676. The Nighthawk comes with safety cables, electrical umbilical, and LED lights which are all unique features for Roadmaster tow bars. It is made of aluminum, stainless steel, and powder coated...
view full answer... - Recommended Flat Towing Setup for a 2009 Subaru ForesterI do have a solution for you, but it does involve the use of a hitch receiver on your RV. If you do not already have one, I have attached a link to our selection of hitch receivers that you can look through. One of the most popular RV hitch receivers is the Curt Adjustable Width Trailer Hitch Receiver # C13701 which will fit frames from 18" to 51" and can be bolted or welded on. Aside from that, the other equipment that you will need to flat tow your 2009 Subaru Forester is a Base Plate...
view full answer... - Recommended Base Plate Kit and Other Parts to Flat Tow a 2008 Jeep Wrangler with Warn Front BumperYour Warn off-road bumper has shackle mounts. If the mounts are 3/4 of an inch thick you can use the adapter # RM-035 or if they're 1 inch thick you can use # RM-035-1. Both adapters will work with your Roadmaster Falcon 2 # RM-520 with no problem at all. If you don't already have them you'll also need safety cables, wiring, a braking system, and likely a high-low adapter to flat tow the Jeep. The safety cables I recommend at # RM-643. They're coiled which helps keep them off of the...
view full answer... - Can a 2011 Honda Fit with Manual Transmission be Flat Towed with All 4 Wheels on the GroundYou should verify with the owner's manual but from my research the 2011 Honda Fit can be flat towed with all 4 wheels on the ground. To flat tow it you're going to need a tow bar, base plate kit, wiring, a supplemental braking system, and likely a high-low adapter. The Roadmaster Falcon 2 Tow Bar # RM-520 is a great option to tow your Honda. It has a large hookup raidus and self-aligns so hooking up is easier and smoother. It connects right up to the EZ Base Plate Kit # 521190-1 along...
view full answer... - Parts Needed to Flat Tow 2018 Subaru ForesterFor your 2018 Subaru Forester we have the Blue Ox base plate kit part # BX3619 which is a confirmed fit and will work well. I attached an install video for this kit on a similar 2018 Subaru Forester as yours for you to check out as well. For a tow bar that comes with safety cables the Blue Ox # BX7380 will work great too. It's non binding arms will make connecting and disconnecting the tow vehicle very easy as well. For lighting you can use the diode kit, # RM-15267, and not have to worry...
view full answer... - Lunette Ring Tow Bar Recommendation for Flat Towing 2004 Chevy SilveradoFor a tow bar we have the Roadmaster Stowmaster part # RM-583 which has a 6k capacity and uses a 3 inch Lunette ring. So then for a base plate kit you'd want the part # 3115-1 for if you have a 1500HD, 2500HD, or 3500HD. If you have a 1500LD Z71 you'd want the part # 199-5 or part # 199-10 for if you have a 1500LD that's not a Z71. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring...
view full answer... - Can 1996 Toyota RAV4 Manual Transmission be Flat Towed Behind RVSince your 1996 Toyota RAV4 is a manual transmission it can easily be flat towed. For a base plate kit you then would want the part # 1142-1 which is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground. For lighting...
view full answer... - Parts Needed to Flat Tow a 1998 Toyota RAV4 Behind a 2004 Dodge Ram 3500 with a Truck Bed CamperBefore flat towing your 1998 Toyota RAV4 you'll want to verify with your owner's manual or with Toyota that it can be flat towed without causing any damage to it. From my research if it has a manual transmission there isn't a problem but the automatic transmission model cannot be flat towed with all 4 wheels on the ground. To tow the RAV4 you'll need a base plate kit, tow bar, wiring to power the lights, a braking system, and likely a high-low adapter. Plus, in your case you may need...
view full answer... - Parts Needed to Flat Tow 2024 Jeep Wrangler UnlimitedFlat towing your 2024 Jeep Wrangler Unlimited will require base plates, a tow bar, safety cables, wiring and a supplemental braking system. I recommend the following: -Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights # RM-676 (Includes safety cables) -Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 -Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 (If you do not have ParkSense) -Roadmaster Wiring Kit with Smart Diodes # RM47ZR and # RM-146-7 (If you do...
view full answer... - Parts Needed To Flat Tow A 2004 Dodge Dakota With A Falcon 5200 Tow BarYes we can definitely help set you up. For replacement pins you will need the # RM-910008-00.This is the 3/4" diameter pins and they will be compatible with your Roadmaster Falcon 5200 Tow Bar. You will also need a base plate to go on the front of the towed vehicle. I see you were searching for parts for a 2004 Dodge Dakota. If this is the vehicle you plan to flat tow, I recommend the # 266-1 for 4 wheel drive models, or the # 271-1 for 2 wheel drive models. You will also need the quick...
view full answer...
- Tow Bar Wiring Kit for 2022 Ram 1500While we don't have any plug and play flat tow wiring kits for your 2022 Ram 1500 we have had the chance to install the Roadmaster diode kit part # RM-15267 on a very similar 2021 Ram 1500 to yours and shot an install video that I linked to this page that will walk you through the install.
view full answer... - Parts Needed to Flat Tow a 2016 Honda Fit with Automatic TransmissionI wish we had a cut and dry yes or no answer to your question, but when it comes to deciding if any given vehicle can safely be flat towed with all wheels down that determination goes to the vehicle's manufacturer. I reviewed the online version of the owner's manual for the 2016 Honda Fit EX-L and in the section titled Emergency Towing there is a statement on page 428 that says "...towing behind a motorhome or other motor vehicle can damage the transmission." No mention is made if this...
view full answer... - Parts Needed to Flat Tow 2011 Hyundai Accent behind RVYou would first need to start with a base plate kit for your 2011 Hyundai Accent to flat tow it. For that you'd want the Blue Ox kit part # BX2323 which is a confirmed fit. Then for a tow bar you would want the Alpha # BX7380 which comes with safety cables as well. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of...
view full answer... - Recommended Base Plate for 2016 Ford FocusFor your 2016 Ford Focus, I recommend the Blue Ox Base Plate Kit # BX2663. These base plates are custom-fit for your vehicle and feature hidden reinforcements along with removable bracket arms. This will provide a nice, clean look when your Focus is not being towed. I have attached the installation details that you can look over. Any local auto shop or mechanic should be able to handle the installation without issue.. I recommend using the attached installation details for reference when...
view full answer... - Is The Mopar Recreational Flat Tow Wiring Kit Required for a 2021 Jeep Grand Cherokee CherokeeThe Mopar Recreational Flat Tow Wiring Kit Part 68321424AB is not required to flat-tow a 2021 Jeep Grand Cherokee Cherokee. That said, you will need a base plate kit, tow bar, safety cables, wiring harness, and braking system. I have attached a list of these parts below. Blue Ox Base Plate Kit part # BX1128 Blue Ox Ascent Tow Bar part # BX4370 Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 Blue Ox Patriot Portable Braking System part # BLU37TR I have attached...
view full answer... - Parts Needed to Flat Tow 2016 Jeep Rubicon Hard Rock EditionFor baseplates on your 2016 Jeep Wrangler Unlimited Rubicon Hard Rock Edition the Roadmaster XL Base Plate Kit # 1444-1 will work great with your Roadmaster Falcon 2 Tow Bar # RM-522. You can also use the safety cables # RM-643 and the installation of the base plates calls for Locktite # LT37420. For a wiring kit, the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil # RM-15267 is confirmed to work on your Jeep. It includes all the wiring, connectors, and diodes you'll need. It also comes with...
view full answer... - Parts Needed to Flat Tow a 2007 Lincoln Mark LT Behind an RV After Disconnect Drive ShaftsI checked the owner's manual for your 2007 Lincoln Mark LT and you can flat tow it but the front (on 4x4s) and rear drive shafts must be disconnected. And of course they recommend a Ford/Lincoln dealership disconnect and reconnect the drive shafts for you. If this will work for you then there are several parts you will need to flat tow the truck: base plates, tow bar, safety cables, lights, and supplemental braking. For base plates you can use # 495-1A. They will fit 4x4 models with...
view full answer... - Recommended Flat Towing Setup For A 2011 Toyota YarisFor your 2011 Toyota Yaris, we will start with the baseplates. If you have the sedan or the 5-door hatchback, I recommend the Roadmaster EZ Base Plate Kit - Removable Arms # 521181-5. However, if you have the 3-door hatchback, I recommend the Roadmaster EZ Base Plate Kit - Removable Arms # 521181-1. For these baseplates to be installed, I recommend using the Loctite Threadlocker # LT37420. For your towbar, I recommend the Roadmaster Falcon 2 Tow Bar - Motor Home Mount - 2" Hitch - 6,000...
view full answer... - How To Use etrailer Tow Bar on a 2020 Jeep WranglerIn order to use the etrailer XHD Non-Binding Tow Bar part # e94ZR on a 2020 Jeep Wrangler you'll need to use the etrailer Invisible Base Plate Kit part # e98948. In addition to this you'll also need some other items which I have listed for you below. Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267 Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524 If the tow bar is not within 3" of level then you'll also need a high-low adapter like the Blue...
view full answer... - Recommended Flat Towing Set Ups for a 2022 Ram 1500 and a 2018 Jeep Wrangler To flat tow a 2022 Ram 1500 behind a 2012 Tiffin Phaeton 40QKH you will need the following parts: Tow Bar and Safety Chains - Blue Ox Avail Non-Binding Tow Bar # BX7420 Base Plate Kit - Blue Ox Direct-Connect Base Plate Kit - Removable Arms item # BLU99FR Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - Demco Air Force One Supplemental Braking System for Motor Homes with Air Brakes item # SM99243 High Low Adapter...
view full answer... - Recommended Flat Towing Set Up for a 2022 Ram 1500 Rebel Pulled w/ a Blue Ox Tow BarTo flat tow your 2022 Ram 1500 Rebel with the set up you currently have on your RV you will need the following parts: Base Plate Kit - Blue Ox Direct-Connect Base Plate Kit - Removable Arms item # BLU99FR Supplemental Braking System - Demco SBS Second Vehicle Kit for Air Force One Braking System item # SM99209 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 or since you most likely already have the cable you will just need the following parts...
view full answer... - Recommended Flat Tow Wiring and Braking System for 2014 Ford F-150 Lariat with Class A TiffinI would be more than happy to help you outfit your 2014 Ford F-150 with a braking system and lights for flat towing. I really like the Stay-IN-Play DUO # SM99251, because it is easy to set up each time you tow. You just flip a switch to activate it. For the tail lights I recommend the # RM-15267 because it includes the wiring umbilical you will need to connect the lights from the Tiffin to the Lariat. I also have an installation video of this for you to check out as well. Another product...
view full answer... - Complete Flat Towing Setup for a 2007 Honda FitI can't say for certain without knowing what base plates they are, but I can say it's highly unlikely that the base plates from your Volkswagen is going to fit onto your Honda Fit. I can say, however, that the Blue Ox Base Plate Kit # BX2252 will fit your 07 Honda Fit. This is going to be custom to your Fit and will just bolt up to the chassis of the vehicle using the included hardware. I'm not sure what you have already, but you're also going to need a set of tow bars like # e47ZR, a...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Michael H
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Amber S
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Schuyler H
Video by:
Ethan H
Video by:
Rick G
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Rachael H
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Matthew E
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dale
4/17/2024
System has worked great on several trips in the last year. Including a 5,407 mile trip out west.