Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
Item # RM-152-98146-7
Our Price: $193.11
Confirmed to Fit
2000 Subaru Forester
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (251)
- Q & A (0)
- Photos
2000 Subaru Forester - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.
Features:
- Complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along same wire
- Diodes prevent electrical feedback and the damage it can cause to your car's electrical components
- 7-Wire to 6-wire adapter cord allows you to run power from your RV to your towed vehicle
- Straight cord is ideal for all-terrain tow bars and other tow bars that have channel guides
- 6-Way socket wires to harness and mounts on towed car with included bracket
- Sturdy, durable construction
- Powder-coated aluminum casings protect diodes from corrosion
- Electrical cord resists water, oil and chemicals
- Silicone-injected plugs prevent corrosion
- Kit includes:
- 4 Hy-Power diodes
- Wiring harness
- 7-Way to 6-way adapter cord
- 6-Way socket with mounting bracket
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Limited Lifetime Warranty
Specs:
- Maximum amperage: 85 amps
- Maximum voltage: 24 volts
- Adapter cord length: 6-1/2'
- Wire gauge: 16
- Wiring harness length: 30'
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
RM-152 Roadmaster Universal Hy-Power Diode Wiring Kit
RM-98146-7 Roadmaster Wiring - Straight 6 to 7 - 78" Long
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord - RM-152-98146-7
Average Customer Rating: 4.7 out of 5 stars (251 Customer Reviews)
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.by: Bill11/06/2023
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service!
During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors.
A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
by: Edward 05/16/2024
I also purchased brackets and receivers for the tow bar. Both were as advertised and are functioning very well. The staff were also very knowledgeable and helpful. Hard to find service of this kind in today’s world.
by: Phil 04/04/2024
The installation ins ructions and video were very helpful. The wiring kit worked perfectly.
by: Jason05/08/2023
Great kit. Easy to install. Connectors seem solid and wires are good.
by: James02/24/2024
The installation took some time and the instructions need to be clarified.
by: Dean 10/18/2023
Roadmaster
The Roadmaster 4 diode wiring kit has worked great for a full towing season.
Easy installation, great instructions, and added safety while towing.
The wiring kit easily integrated into the other braking and towing system components.
Thanks e-trailer!
by: William 08/03/2023
This kit worked great. It was easy to install (etrailer offers installation videos if needed). I like this much better than a temporary set of lights on the towed vehicle. The cord and plug are also good quality.
by: Juan09/15/2021
2013 SubaruForester
Works as expected. Connection feels solid enough. Have not had the opportunity to take it on a long trip yet.
One thing bit us in the butt, forcing us to cancel a trip at the last minute (when testing that our towed vehicle's turn signals, brake lights and supplemental brake system was working before driving off!): the left-turn signal prong in the male part of the connector (that plugs into the towed vehicle) was not opened enough, so no steady connection was being made because there was no contact between the prong and the walls of the female part. This had worked in a previous test. Picture included. Make sure to use a flathead screwdriver to open each prong up so full contact is made!
by: Daniel05/02/2024
Easy install. Good directions. Works as described.
by: Janes01/10/2024
Easy instructions and works great!!!
by: Stephen B07/14/2023
I have not been disappointed with anything I have ordered from you.
This wiring kit should do the trick for my flat towing project.
I am sorry that I couldn’t get all of the pieces from you, the transmission pump and base plate was ordered from another company.
This is my fourth camper you are helping me keep maintained and improved.
2000 Cougar 5th wheel bunkhouse,2016 Sprinter 5th wheel front living room , 2021 Nexus 31t class C and a 2016 sprinter tow behind.
by: Steve05/27/2021
I chose the order by phone option. The website is well organized, but, I had gone too long without hearing another person. I have received several orders from etrailer after purchasing an RV last summer. I knew we would be Purchasing a Toad.
I don’t have any experience with towing another vehicle, so I had plenty of help in finding the right equipment for me.
The delivery times were all easily tracked and arrived in good condition. As md on time.
I had the simple tools required to install the base plate and hitch. The videos available on their site are clear and easy to understand.
I have had a great overall experience with etrailer.
by: James04/10/2022
2019 GMC Acadia
Very straight forward install, easy to follow instructions. If you do this your self be prepared, the factory light wiring isn't very long or thick it was difficult to strip the wire back far enough to double it over to get a good connection. Upon completion of the wiring, I double checked all power at both plugs, it was all good, I installed the lights, brake and turnsignals worked great, I didn't have any running lights. About 3 min later they came on and stayed on. I don't believe this has any thing to do with the kit, this vehicle has all kinds of light sensors, darkness sensors, rain sensors.. etc. I believe it just too a min or 2 for the lights to actually come on.
by: Joe H08/31/2022
See my review on the Base Plate. The electric was a little wonky but my mechanic met with the manufacturer and was able to figure it out. That said, once it was resolved, it has worked flawlessly.
by: Bruce 10/04/2023
Easy to install. Would prefer a different method for securing the diodes. I used zip ties of good quality from Ty-Rap instead of the box store cheap imitations.
by: James04/20/2022
Toyota Tacoma
I had a Toyota Tacoma that has separate blinker lights. Took a mechanic that was knowledgeable in electrical wiring. Followed the instructions and it worked perfect. Used it several times since
James J.
4/21/2023
Great. Been on several trips. No problem
by: Wayne05/17/2023
All running and signal lights work great. But no license plate light illumination.
Jenny N.
5/23/2023
You are correct in that the tow bar wiring harness part # RM-152-98146-7 will not illuminate the license plate light as the diodes are meant to keep the signals from backfeeding into your vehicle wiring. We have checked into this and having the license plate light is not mandatory when flat towing.
by: Tom F09/10/2023
2020 Jeep Wrangler
Very straightforward. I followed along to one of the videos on etrailer's site and it went very easy for me thank you etrailer!
by: Richard 02/23/2024
Works great.
by: Beemerjohn12/27/2023
Wiring was about 8 feet short to complete the task.
by: Boyd10/03/2022
2003 Jeep TJ
1 star is simply for the fact that the straight cord is too short. Bought to use with a road master tow bar. Since I needed a drop hitch to line the tow bat up with the toad I needed about a foot more cable. Tried to make do with the one supplied. I ended up having to spend an hour in the parking lot of an rv store wiring up a new one on my first trip. You would think for [local stores] you have to pay for this they could spring for a little extra wite.
Katrina B.
10/17/2022
That is unfortunate that there was not enough wire for your application. We do carry 16 gauge bonded 4 wire, part # 16-4B-1, by the foot. You can always contact our customer service department for them to assist you in getting this wire ordered.
by: Don 04/13/2023
Honda
Kit worked well. On 2012 Honda CRV I was able to run the wire to the rear under interior panels then install diodes inside each quarter panels eliminating any wiring or component connections exposed to the weather.
by: Edwin01/27/2023
It was the installation that was a issue, it works great now that I finally got it installed correctly. Had to go through 3 companies before it worked. It cost me 3 times as much, I went to a recommended installer from your site, and they hook it up but didn’t used the diodes that were provided. I took it back, and asked them to install the diodes.(the company “Fatal LLC”) charged me [XX] I kept getting feedback when the emergency lights were used, they say it’s normal for that to do that. I didn’t believe it, so I-took it to camping world, they rewired it and used a different diode don’t asked me why, but it-still didn’t work they said it would eventually work itself out, It didn’t, so I had still have the problem with the feedback when using the emergency flashers. I guess I’ll live with it. It works I guess….
by: Neal 04/08/2023
2023 Jeep Wrangler
Have not installed yet (DUO Brake system and wiring) from what I have seen I am impressed with all parts delivered.
tow bar Plate is more than substantial and the Tow bar is amazing.
by: Matt09/03/2022
I ordered base plates and the wire harness, the wire harness would not allow for brake, running, and turn signal lights, I had to omit one, the turn signals. The base plates where difficult, requires removing the front of the car. the video did not state the distance front to rear, I was a half inch to far forward and the fog light would not fit.
Jenny N.
9/20/2022
You mentioned that the harness would not allow for the brake, running and turn signal lights. For vehicles that have separate turn and brake lights, this kit will cause your brake lights to function as both brake and turn signal lights. This is perfectly fine. If you want to have both separate turn and brake signals, then you will need part # 118158 and part # RM-792 to do so.
25
251
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Difference Between Roadmaster Base Plates For 2000 Jeep Grand Cherokee & Recommended Braking SystemThe only difference between the (now discontinued) Roadmaster Crossbar-Style Base Plate 1419-5 and (now discontinued) Direct-Connect Base Plate 1419-6 for your 2000 Jeep Grand Cherokee is that the crossbar style requires a separate piece to attach the tow bar, the Crossbar Assembly for Roadmaster Motorhome Mounted Tow Bars # 910021-00. Because they are discontinued I recommend going with a base plate from Demco that fits your Grand Cherokee, along with a compatible tow bar: - Demco Classic...
view full answer... - Parts Needed to Flat Tow 2015 Jeep Wrangler Unlimited Rubicon With Smittybilt Bumper & 10 Inch RiseWe can get your 2015 Jeep Wrangler Unlimited Rubicon with a Smittybilt bumper set up for flat towing, including the correct high-low adapter to make up that large 10" height difference between the D-rings and your hitch. To make it easy, I'll create a list of the parts you'll need for your Jeep. - Base Plates: 3/4" Shackle Mounts: Adapter for Jeep D-Ring Bumper Mounts - 3/4" Thick # RM-035 OR - 1" Shackle Mounts: Adapter for Jeep D-Ring Bumper Mounts - 1" Thick # RM-035-1 - Tow Bar: Roadmaster...
view full answer... - Recommended Flat Towing System for 2006 Honda Accord with Manual TransmissionIf your 2017 Sprinter 3500 has a trailer hitch receiver then you can start working on the flat towing components for your Honda, but if you don't already have that, then I recommend starting with the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704. For your flat towing setup, you will need many different components and I've linked an article to the basic flat towing components to assist. There is baseplates for the vehicle frame custom fit, the tow bar to connect...
view full answer... - Can Roadmaster RM-522 Falcon All Terrain Tow Bar Handle Weight of 2021 Jeep Grand CherokeeThe Roadmaster # RM-522 Falcon All Terrain tow bar has a capacity of 6000 lbs. From what I read online, the 2021 Grand Cherokee would weigh a maximum of about 5000 lbs. You'll want to leave about a 1000 lb cushion for safety, so unless you'll be towing your Grand Cherokee completely loaded down with gear, the # RM-522 Falcon All Terrain would be a great choice for you. If you did need a higher capacity, the Roadmaster # RM-576 Sterling Tow Bar you'd looked at would also be a great choice. You'll...
view full answer... - Recommended D-Ring Adapter To Flat-Tow 2019 Jeep Wrangle With Aftermarket Off-Road BumperAs long as the Iron Cross bumper on your 2019 Jeep Wrangler is flat-tow rated and has D-Rings that are 3/4" thick or 1" thick you can use the bumper instead of base plates for flat towing. You will need to contact Iron Cross directly to confirm that you can flat tow with your bumper. If you bumper is flat-tow rated you can use the Roadmaster Adapter for Jeep D-Ring Bumper # RM-035 if the D-Rings are 3/4" thick or the Roadmaster Adapter for Jeep D-Ring Bumper # RM-035-1 if the D-Rings are...
view full answer... - Do You Need To Disconnect The Battery On A 2019 Cadillac Escalade While It Is Flat TowedI have a solution for you. Even if you have a charge line to your battery in the 2019 Escalade, there is a risk that the motorhome will actually drain the battery when the Escalade gets to low on power. I recommend using the Roadmaster Automatic Battery Disconnect with Switch for Towed Vehicle w/ Supplemental Braking System # RM-766. It is going to give you the easiest disconnect, just a push of a button. When you are ready to restore power just put the button again. You will still need...
view full answer... - Recommended Flat Towing Components For A 2017 Jeep Wrangler Unlimited Willys WheelerTo flat tow a 2017 Jeep Wrangler Unlimited Willys Wheeler edition you would need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit # RM-521448-5. This baseplate is only designed to fit standard factory bumpers. If you have a different bumper we'll need to know what it is to see if any baseplates are confirmed to fit with it. Tow Bar: etrailer SD Non-Binding Tow Bar # e74ZR. This tow bar comes with safety cables bracketed to the arms so you won't have to worry...
view full answer... - Does InvisiBrake Supplemental Braking System for Towed Vehicle Cover Lighting FunctionsWe can help with a way to activate the taillights of your 2012 Honda CR-V when it's being flat towed but the supplemental braking kits like the InvisiBrake part # RM-8700 are not designed provide that function. What you would need for that is the # RM-152-98146-7 which comes with everything needed to control the taillights of the CR-V with you tow vehicle.
view full answer... - Complete Flat Tow Setup of 2006 Chevy HHRFor a complete flat towing setup of your 2006 Chevrolet HHR you will need the following equipment. For the base plate kit, the Roadmaster # 3141-1 kit would be a perfect fit. Next you will need a tow bar. I recommend the Roadmaster # RM-522 “Falcon” All Terrain and Non-Binding tow bar rated for 6000 pounds. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle. When your coach and towed vehicle...
view full answer... - Recommended Tow Bar Wiring Kit For A 2017 Lincoln MKZWhen it comes to installing the tow bar wiring on your 2017 Lincoln MKZ The Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7 is the correct kit you would need. This kit is for a RV with a 7 round adapter and will make the Lincoln MKZ mirror the turn, stop and tail lights of the motor home. If your motorhome has a 4 flat connector you would need The Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154. The # C56258 is used...
view full answer... - Items Needed To Flat Tow A 2015 Jeep WranglerTo flat tow your 2015 Jeep Wrangler you'll need the following confirmed fit items: Tow Bar: The Roadmaster Sterling All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 8K Item # RM-576. This Tow bar comes with built in safety cables that will work with the Roadmaster baseplate I recommended. Tow Bar Wiring: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item # RM-152-98146-7 Baseplates: The Roadmaster Direct-Connect Base Plate...
view full answer... - Will Standard Tow Bar Diode Kit fit 2021 Jeep Wrangler with Premium LED Lighting GroupFor your 2021 Jeep Wrangler the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles, # RM-152-98146-7 is what I suggest. There is nothing different needed for the lighting setup that you have.
view full answer... - Tow Bar Lighting Solution for 2021 Jeep Wrangler UnlimitedFor tow bar lighting/wiring for your 2021 Jeep Wrangler Unlimited the Roadmaster kit part # RM-152-98146-7 would be a really great option. There isn't a plug and play option for your vehicle at this time, but that's not a very common option for vehicles so using a diode kit like this is the most common way. The adapter cable that connects between the tow vehicle and towed vehicle uses a 7-way to a 6-way which you can pass through the charge circuit with. So on your vehicle you'd just need...
view full answer... - Parts Needed to Flat Tow 2019 Jeep Wrangler Unlimited With Demco Tow BarWe can help you out, and I'll go ahead and list all the parts you will need to flat tow your 2019 Jeep Wrangler Unlimited with a standard plastic bumper and the Demco Commander II Non-Binding Tow Bar # DM9511012. - Base Plate Kit: etrailer Invisible Base Plate Kit # e98948 - Wiring Kit: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7 - Supplemental Braking System: Demco SBS Stay-IN-Play DUO Supplemental Braking System # DM86VR...
view full answer... - Is Mopar Steering Wiring Harness Needed When Flat Towing 2021 Jeep Cherokee to Prevent Death WobbleLuckily enough, Jeep solved that death wobble problem, so you won't need the special wiring harness from Mopar. To flat tow your Cherokee Trailhawk, along with the # RM-522 Falcon All Terrain tow bar you'd looked at you'll need a base plate kit like # RM-521451-5 and # RM-643 safety cables. To wire the taillights, I'd recommend a diode system like Roadmaster # RM-152-98146-7. You'll also want to use a charge line kit # RM-156-25 to keep the battery topped off while towing. For a supplemental...
view full answer... - Base Plate Compatible with Jeep Cherokee Trailhawk Elite with Front Bumper SensorsRoadmaster base plate kit # RM-521451-5 is confirmed to fit both the Trailhawk and Trailhawk Elite versions of the 2019 Jeep Cherokee. I confirmed with Roadmaster that this base plate works fine with the Technology Group package with the front bumper sensors. For proper fit the vehicle must have factory tow hooks and must not have the Active Air Shutter feature. The other components you'll need to complete your flat towing setup include the tow bar, safety cables, a wiring/lighting solution,...
view full answer... - Complete Flat Towing System for 2020 Jeep Wrangler UnlimitedThe Blue Ox Avail Tow Bar - Motorhome Mount - 10,000 lbs # BX7420 is just one part of the system you need to flat tow your 2020 Jeep Wrangler Unlimited. You will also need the baseplates, the wiring harness, the supplemental braking system and a high-low adapter. I recommend the following items to go with that tow bar for your Jeep: -Blue Ox Base Plate Kit - Removable Arms # BX1139 -Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7 -Demco...
view full answer... - Can a 2011 Honda Civic Be Flat Towed 4 Wheels Down?According to your owners manual, your vehicle is not able to be flat towed. Doing so is against the manufacturer recommendation and warranty. Many people have towed a 2011 Honda Civic 4 wheels down and obviously there are manufacturers that make all the parts to do so. If you choose to do this, you will need baseplates, tow bar, safety cables, electrical wiring, supplemental braking system, and high low adapter. Here are my recommendations if you go that route: -Blue Ox Base Plate...
view full answer... - Can A 4-Pole Wiring Harness Be Spliced Into A 6-Pole Socket To Flat Tow A 2013 Honda Fit While it is possible to cut the 4-pole connector off of the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56302 and wire it into a 6-pole socket, you would be doing yourself an IMMENSE disservice using any kind of plug-in tow bar wiring as they consistently fail. We get A LOT of troubleshooting questions here for plug-in kits and it always ends up requiring a complete replacement of the wiring harness because with these kits the parts are not replaceable. Save yourself the...
view full answer...
- Complete Flat Towing Setup For A 2022 Ford Ranger With Roadmaster Base Plates & A Blue Ox Tow BarIt's up to you entirely however, it's much easier to just use the adapter # RO64FR so you can use your Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380 with your Roadmaster Direct-Connect Base Plate Kit # RM-524459-5. If you don't want to use an adapter, you can use the Blue Ox Base Plate Kit # BLU77XR which will connect directly to your Blue Ox # BX7380 tow bars. Finally, if you need a complete setup as well, you'll also need: - A braking system # RM-9060, with a brake light relay # RM-88400,...
view full answer... - 2000 GMC Safari Van Brake Light DiodesIt sounds like you want to flat tow a 2000 GMC safari behind an RV, and you need a flat tow wiring kit to operate your tail lights on the Safari. I would recommend the Roadmaster # RM-152-98146-7 Universal wiring kit which includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord. If you only want the tail light diodes,...
view full answer... - Parts Needed To Flat Tow 2018 Jeep JK Wrangler 2-Door With Plastic Skid PlatesYes, I can give you the parts list you will need to flat tow your 2018 Jeep JK Wrangler with 2 doors and a plastic skid plate. I assume you have the standard 2” square hitch receiver on your coach with the standard RV-Style 7-pin electrical connection. First you will need the Roadmaster # RM-521448-5 Direct-Connect Base Plate Kit designed to work with a factory standard bumper with no winches or guards. Next you will want a Roadmaster # RM-522 Falcon All Terrain and Non-Binding tow...
view full answer... - Parts Needed To Flat Tow a 2013 Honda CR-VYou will need a base plate kit made specifically for your CR-V. The Roadmaster # RM-521567-5 Direct-Connect kit is a perfect fit and features quick disconnect arms. Next you will need a tow bar. I recommend the Roadmaster # RM-522 “Falcon” All Terrain and Non-Binding tow bar rated for 6000 pounds. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle. When your coach and towed vehicle are...
view full answer... - Complete Flat Towing Setup For a 2019 Ford RangerNo, the Curt Adjustable Tow Bar # C19745 does not have the weight capacity to be able to tow your 2019 Ford Ranger. Instead, you'd need to use a tow bar that has the weight capacity to handle your Ranger, like the Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380. This tow bar has plenty of capacity to be able to handle your Ford Ranger, however with this being a Blue Ox tow bar you'd need to use Blue Ox base plates or get the correct adapter for your base plates. If you don't have anything,...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Zack K
Video by:
Kathleen M
Video by:
Shane H
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Rick G
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
3/3/2023
no issues after 10K miles super happy with this product