View Cart
Battery Post and Terminal Cleaner - Wire Brush

Battery Post and Terminal Cleaner - Wire Brush

Item # DW00254

lowest price pledge

Retail:$9.78

Our Price: $2.95

You Save: 70%
Wiring

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.19 lbs

Quantity: 
In Stock, Ships Today
Deka Tools for Wiring - DW00254
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos

Videos


  • Tools for Wiring
  • Wire Brush
  • Deka
Lowest Prices for the best wiring from Deka. Battery Post and Terminal Cleaner - Wire Brush part number DW00254 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (10)
  • Q & A (62)
  • Videos (1)
  • Photos
  • Why etrailer?

Deka Wiring - DW00254


  • Cleans top posts of battery and matching cable connections
  • Wire brush works well for cleaning out rusty weld nuts in vehicle frame - great for installing trailer hitches

00254 East Penn / Deka Wiring Battery Terminal Post and Clamp Cleaner





Video of Battery Post and Terminal Cleaner - Wire Brush


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Deka Battery Post and Terminal Wire Brush Cleaner Review

Today we'll be looking at our battery post and terminal cleaner by Decca 00:00:03, part number DW00254. All right, here's our battery terminal cleaner. We've got our post cleaner in here. It has a lot of teeth in here to get a good grip on your battery post. We also have our brush side. See this little notch here Twist it and you can see there's a groove that lines up with that notch that locks the top in place. We have our battery clamp cleaner.

It's got a nice screw edge to it so it pulls that dirt out of our clamp. The reasons you would need this is if you're having problems with your vehicle starting, things aren't staying on, they're flickering back and forth, that probably means your battery posts are dirty. That's when you want to get a battery post cleaner. Clean those off and you'll get a better connection. Now that I've shown you this cleaner, we can show you how it works on a vehicle. If you're cleaning your positive post and nothing else, I would suggest taking off your negative post if you have a dual battery setup. That way you don't have any chance of grounding yourself out. We'll get started.

We'll loosen up our clamp. We'll remove it. Now we can take our clean. We've got the bristle brush side that fits over our posts. Just push it on and twist.

It gives you that nice, clean edge on it. You want to push it all the way down until it touches your battery and you can twist it back off. I suggest doing our negative post as well, so come over, do the same thing. Push it all the way down and give it a few twists. Now that I've cleaned the posts, we've got this unlock, you just have to twist it and it pops off. Set my cap down.

Come over here to our clamp. We'll do the same thing. The same twisting motion. Twist it as I push all the way through. If you can see there, it gives us that nice, clean copper look in there. You can also use the brush edge to kind of clean out any of the grooves but if it's really extensive, Decca 00:02:36 also has a battery terminal protection kit that comes with a cleaner spray and felt washers to protect your battery terminals. Now that I'm done cleaning our battery terminals, I can re-install everything and we're good to head down the road. That's our look at the Battery Post and Terminal Cleaner, part number DW00254.


Customer Reviews

Battery Post and Terminal Cleaner - Wire Brush - DW00254

Average Customer Rating:  4.7 out of 5 stars   (10 Customer Reviews)


- DW00254
by:

I built my recovery trailer built, than ks 519597



- DW00254
by:

Kathy in customer service took great care of me, made sure I got all the correct products for my vehicle. Was patient with me as I went back and forth getting measurements. I saved a 1000 doing the work my self. 446726



- DW00254
by:

I was able to clean up very very dirty weld nuts perfectly with this cleaner. Awesome! 258162



- DW00254
by:

Did it's job. Get some WD-40 and that helps too. 233173



- DW00254
by:

I had a local garage install the hitch and there were no problems. 214427



- DW00254
by:

Did a good job of cleaning out the threads before installing the mounting bolts for my hitch. 144707



- DW00254
by:

Just get your stuff here!!!! No BS with these guys! Excellent all around. Ventura 116199



- DW00254
by:

Looks very good. Haven't used prod. Yet 108520



- DW00254
by:

I used this to help clean weld nuts for a trailer hitch. The threads on the weld nuts have seen 9+ years of dirt, debris, snow, salt . . . and it showed. This terminal cleaner wire brush was one part of getting the job done. (WD40 and a tap were the other parts.) Once clean, the hitch went right on. 99704



- DW00254
by:

The battery terminal brush was on sale so I bought an extra one to keep in the car! 81775


10
10

Ask the Experts about this Deka Wiring
Do you have a question about this Wiring?


  • Trailer Hitch Bolts Will Not Thread Into Factory Weld Nuts
  • The problem you are having is common. What happens is over the years the factory weld nuts in the vehicle frame can get packed with crud and corrosion making it difficult to thread in hitch hardware. Some people thing that the bolts are too large when the issue can actually be resolved by giving the weld nuts a good cleaning. Use a spray lubricant such as PB Blaster and soak the weld nut threads for about 15 minutes. Then scrub them out using a wire brush such as # 814113 or a battery...
    view full answer...

  • Solution for Trailer Hitch Install Bolts that Seem too Big to Thread In
  • Due to the age of your vehicle, there is an excellent chance that there is a significant amount of corrosion and road grime built up in the weld nuts in the frame of your Chevy Equinox. This build up is what is preventing the bolts from threading into the weld nuts. The best way to clean the threads is to use a spray lubricant and a wire brush like that on the battery post and terminal cleaner, part # DW00254. In some extreme cases, the corrosion is bad enough that a thread tap the same...
    view full answer...

  • Trailer Hitch Bolts Will Not Fit into factory Weld Nuts in Frame
  • The weld nuts on your vehicle will likely have to be cleaned out. Over time the threads can get packed with gunk and make it seem like the bolts are too large when really they are not. Use a spray lubricant such as PB Blaster and soak the weld nuts. Let them sit for about 15 minutes and then scrub them out with a brush such as # 814092 or a battery terminal cleaner such as # DW00254. You may have to do this a few times depending on how gunked up the threads are. I have included a couple...
    view full answer...

  • Methods to Clean Contacts in 7-Way Trailer Socket on 2010 Dodge Ram 2500 Pickup
  • Inside your Ram's factory 7-way trailer socket are multiple lighting circuits and a 12V power circuit that is there to power an electric trailer tongue jack or to deliver a trickle charge to a battery mounted on the trailer. If you refer to the linked photo you can see which function/circuit is assigned to each of the electrical contacts inside the connector. The 12V power circuit is carried on the pin at the 1:00 position as you look at the socket. If your wire brush were to contact...
    view full answer...

  • Hitch Bolts Seem Too Large for the Weld Nuts in the Frame on a 2000 Toyota Camry
  • The bolts provided with the Draw-Tite Trailer Hitch, # 36336, are the correct bolts for your 2000 Toyota Camry, see instructions link. You are most likely running into corrosion from road grime and salt since your vehicle has some age. We have help videos, see links, that detail how to go about cleaning the vehicles weld nuts for installing the hitch. You may find that a weld nut will break off when trying to install the hitch, despite your best efforts, if this happens we have a video...
    view full answer...

  • Cleaning Out Weld Nuts to Install a Trailer Hitch on a 2006 Toyota Sienna
  • In all likelihood you will not have to tap the holes on your 2006 Toyota Sienna to get the hitch bolts to fit. Usually the issue is that the weld nuts on the vehicle will get packed with grime and corrosion and all you will have to do is clean them out. You will need some spray lubricant such as WD40 and a wire brush or battery terminal brush such as # 814092 or # DW00254. Spray the weld nuts with the WD40 and let them soak for about 15 minutes. Then go at the holes with the wire brush...
    view full answer...

  • What Are Weldnuts And What Hitch Will Fit A 2001 Dodge Van Using The Existing Weldnuts
  • Weldnuts are the nuts that a mounting bolt will thread into and are welded to the holes on the inside of the vehicles frame. Usually it is just a nut inside the vehicle frame but it might be a plate with threads. Removing the weldnuts might be very difficult since they are located inside the vehicles frame and hard to access. I am sending a link to a video that will show how to remove corrosion inside a weldnut. This video will show you the weldnut in the frame. On your 2001 Dodge...
    view full answer...

  • Trailer Hitch and Wiring Recommendation for 2012 GMC Acadia
  • The trailer hitch I recommend for your 2012 GMC Acadia is the Draw-Tite Class III Max Frame Round Tube Receiver # 75528 because it offers a greater towing capacity at an economical price for you. This hitch will also offer a more streamline look for your Acadia when it is exposed than the square and boxier framed Curt hitch. We have found that the original fascia cover on the 2012 models of the Acadia is not able to be reinstalled after an aftermarket hitch is installed. Other customers...
    view full answer...

  • Recommended Trailer Hitch with 1-1/4 Inch Receiver for 2007 Hyundai Tucson
  • Any of the Class II trailer hitches that are confirmed to fit your 2007 Hyundai Tucson will work with your Yakima BigHorn 4 bike rack for 1-1/4 inch hitches. The Class II trailer hitches we offer that are confirmed to fit your 2007 Tucson are the Draw-Tite # 36363 and the Curt # C12126. The hitch I recommend is the Draw-Tite Class II Frame Receiver Hitch # 36363. This hitch will work well with your bike rack, but will not require the use of an additional stabilization strap like the Curt...
    view full answer...

  • Trailer Hitch and Installation Help for 1990 Mitsubishi Montero
  • All of the trailer hitches we supply include the necessary hardware for installation. The particular hardware supplied is based on the requirements of each specific vehicle and will ensure that the hitch's full capacity can be realized when installed as per the manufacturer's instructions. This is true for the Curt Class II hitch for your Montero, part # C12181. The Curt hitch uses 12 mm x 30 mm bolts with a 1.25 thread pitch. The two linked articles will give you many useful tips for...
    view full answer...

  • How to clean Weld Nuts and Torque Specs to Install Draw-Tite # 76028 on a 2011 Chevy Equinox
  • If your weld nuts are rusted then the best way to clean them would be to spray them with a lubricant like PB Blaster lubricant or WD-40 and then scrubbing them with a wire brush like part # DW00254 after the lubricant has sat for a few minutes. You may need to do this a few times as in mentioned in the attached article and video on cleaning weld nuts. I was able to find that you are installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 76028 on your 2011 Chevy Equinox. The 1/2-13...
    view full answer...

  • The Included Bolts Will Not Fit in the Weldnuts on Trailer Hitch 75128 on a 2002 Jeep Liberty
  • We have had this question before on a 2002 Jeep Liberty. Basically, there could be some dirt and grime gumming up the works and getting stuck in the weld nuts. This would make them hard to insert the bolts into. You can try cleaning them out real well using a spray lubricant like WD-40 or PB Blaster. Let it soak for a while and then dive in with a wire brush, like the Battery Post and Terminal Cleaner - Wire Brush, # DW00254, and some elbow grease to clean out the weldnuts. Once clean,...
    view full answer...

  • Tips for Cleaning Weld Nuts and Removing Bolts for a 2010 Dodge Caravan Trailer Hitch Installation
  • The first thing I would recommend before installing Draw-Tite Trailer Hitch, # 75579, on your 2010 Dodge Grand Caravan is to clean out the weld nuts on the vehicle. You can use some WD-40 and a wire brush like # DW00254. I have included a link to a video showing how our installers clean out weld nuts. What this will do is clean out any dirt and corrosion from the threads so the bolts can install correctly. It also means that there will not be anything to bind the bolts which should make...
    view full answer...

  • Trailer Hitch Fits for 2002 Jeep Liberty Sport
  • There are two primary causes for a hitch fit to appear incorrect when you go to install it. If the shipping carrier subjected the hitch to rough handling - one good drop from a truck will do it - the alignment of the mounting flange holes can be off, making it all but impossible to install it without first re-bending it back to its original dimensions. This kind of shipping damage can be hard to detect until you go to mount the hitch. The hitch can look perfect but still be bent. The...
    view full answer...

  • Cleaning or Tapping the Weld Nuts on a 2006 Honda Pilot to Install Curt Trailer Hitch, # 13328
  • The weld nuts on your 2006 Honda Pilot could just be so compacted with grime that they appear to be thread-less. I recommend giving them another good cleaning using the lubricant like you did before, and a stiff bristle wire brush like # DW00254. You may have to do this several times. I have linked a video of this process below. If you still cannot thread the bolts in, even after a thorough cleaning, you may have to tap the holes to re-thread them and clean them out. I would use this...
    view full answer...

  • Size and Thread Pitch of Attachment Bolt for Draw-Tite Class I # 24812 for 2004 Pontiac Vibe
  • The Draw-Tite Class I # 24812 hitch attaches to nuts welded into the frame of the vehicle using M12 X 40mm bolts which have a 1.25 thread pitch. If the weld nuts in your frame are corroded or clogged up with road grime, before resorting to chasing them with a tap, you can try cleaning them using some spray lubricant like WD-40 and a wire brush like the one on a battery terminal cleaner # DW00254.
    view full answer...

  • How to Remove Corrosion and Road Grime from Weld Nuts to Install Hitch on 2004 Toyota Solara
  • As far as the hitch installation goes, a vehicle as old as yours is bound to have quite a bit of road gunk built up into the weld nuts, which can make getting the bolt started to be a bit of a challenge. Keep soaking the weld nuts with spray lubricant (we use WD-40) and using a wire brush like # DW00254. If all else fails, you can use a M10 x 1.25 tread tap to chase the threads in the weld nut. For a wiring harness, I'd recommend the Tow Ready # 119147KIT. The kit includes a circuit...
    view full answer...

  • How to Clean Rusty Weld Nuts for Trailer Hitch Installation on a 2004 Toyota Highlander
  • Before using a tap to clean the threads, I recommend taking a different approach first to clean them out. Using some WD-40, a wire brush or battery terminal brush like # DW00254, and a little elbow grease, you should be able to clean out the threads without potentially damaging the threads on your 2004 Toyota Highlander. I have included links to an FAQ article and a video showing the process. There should be 6 bolt holes with weld nuts, 3 on each frame rail. The bolts that fit them are...
    view full answer...

  • Does Draw-Tite Class III Receiver # 75270 Include Installation Hardware
  • The Draw-Tite Class III Receiver, part # 75270 will include all necessary installation hardware. The hitch will install using existing nuts that are welded into the frame members at the rear of the vehicle. Any vehicle more than a year or two old can get some corrosion and road debris built up into the mounting holes. Before attempting to install the bolts that hold the hitch into place, we recommend cleaning these holes out. Our installers will typically give each mounting hole a good...
    view full answer...

  • Cleaning Out Corroded Weld Nuts to Install a Trailer Hitch on a 2007 Kia Sedona
  • Corrosion and road grime can get inside of vehicle weld nuts on any vehicle that has seen at least one winter. This is most likely the case you are facing. There is a solution. You will need to lean out the weld nuts using a spray lubricant and a wire brush like # DW00254. I have included links to a video and FAQ article that will show you how to clean out the weld nuts for hitch installation.
    view full answer...

  • Concern with Exhaust Contact with DrawTite Hitch Installation for 2000 Buick Century Sedan
  • We offer two different Draw-Tite hitch receivers than will fit the 2000 Buick Century sedan. Part # 24659 is a light-duty Class I Sportframe hitch with a 2000-lb towing capacity. Part # 36374 is a full-size higher-capacity Class II hitch with a 3500-lb tow rating. Both feature 1-1/4-inch receiver openings, both carry a limited lifetime warranty from Draw-Tite and both require trunk access and drilling for installation. I suspect your concern with exhaust contact is in relation to hitch...
    view full answer...

  • Installation Instructions and Tips for the Curt Class III Trailer Hitch # 13354 on a 2008 Acura MDX
  • It is a good idea to look over the instructions before purchasing a trailer hitch. That way you can be prepared with the correct install tools and will know what the process will require before getting under the vehicle. Installation details are available on the product page (see link) for the Curt Class III Trailer Hitch, item # 13354, which will fit your 2008 Acura MDX. Installation of this hitch does not require drilling, welding or cutting of any parts on your vehicle. We have a...
    view full answer...

  • Size of Bolts Used for Installing Draw-Tite Class III Trailer Hitch on 2004 Honda Odyssey
  • The Draw-Tite Class III Trailer Hitch, part # 75270 uses 12mm-1.25 bolt. If you have difficulty finding a thread tap, you can try using a spray lubricant and a round wire brush, like the one on a battery terminal cleaner such as part # DW00254. Soak the threads, and then wait a few minutes. Spray again and give the threads a good scrub with the brush, then flush out any residue with some more spray. You might need to repeat this a few times. It might go without saying, but please wear...
    view full answer...

  • How to Clean Rust/Corrosion from Frame Weld Nuts on 2008 Toyota RAV4 for Hitch Installation
  • I suggest you try a brass tube brush and a healthy dose of WD40 or PB Blaster on your rusted weld nuts. We also offer a wire brush # DW00254. You may need to use multiple applications of the lubricant, and allow time for it to soak in overnight, before using the brush. If you use a tap you could alter the fit of the hitch hardware which could affect the hitch's actual capacity, so I recommend using the lubricant/brush several times. Please refer to the linked video and article on hitch...
    view full answer...

  • Cleaning Weld Nuts to Install Trailer Hitch On 2012 Toyota Corolla
  • The Curt Class I Round tube Receiver Hitch # C11265 uses 4 M12-1.25 x 30mm hex bolts. These bolts come with the trailer hitch. I only recommend using the included hardware to install the # C11265 trailer hitch. Typically any vehicle that has seen a winter will need the weld nuts cleaned before installing a trailer hitch. We recommend using a lubricant and a wire or nylon brush to clean the weld nuts. Several of our installers like to use the Deka Battery Post and Terminal Cleaner -...
    view full answer...

  • How to Clean Out Weld Nuts on a 2006 Toyota Matrix to Install a Trailer Hitch
  • You would not use a tap to clean the threads. A tap would be used to cut new threads. To clean out the weld nuts on the vehicle in order to install a trailer hitch you will just need some WD40, a wire brush like # DW00254, and a little elbow grease. I have included a link to our FAQ article and a video on cleaning out weld nuts for hitch installation.
    view full answer...

  • Cleaning Corroded Weld Nuts on 1997 Toyota Camry
  • Due to the age of your vehicle, there is an excellent chance that there is a significant amount of corrosion and road grime built up in the weld nuts in the frame of your Camry. This build up is what is preventing the bolts from threading into the weld nuts. The best way to clean the threads is to use a spray lubricant and a wire brush like that on the battery post and terminal cleaner, part # DW00254. In some extreme cases, the corrosion is bad enough that a thread tap the same size as...
    view full answer...

  • Mounting Bolts Supplied with Draw-Tite Hitch 75714 Seem Too Large for 2012 Nissan Quest
  • The hardware supplied with the Draw-Tite Hitch # 75714 for the 2012 Nissan Quest is specific to your vehicle. It may be that the threads in the weld nuts on the frame are dirty. It is not uncommon for road dirt to find its way into the threads and accumulate, making it difficult to get the bolts started. You can try using a spray-on penetrating rust remover like # L10444 and a brush such as part # DW00254 to clean out any debris from the threads, as shown in the linked installation video....
    view full answer...

  • Bolt Holes are Too Small for Trailer Hitch Installation on a 2007 Hyundai Santa Fe
  • What you are most likely experiencing is weld nuts on the vehicle that are packed with corrosion and/or road grime. This happens on any vehicle that has seen at least 1 winter. What you will need to do is clean out the weld nuts so the bolts can be threaded in freely. We have some helpful links that I have included that will help you clean out the weld nuts. You will need some spray lubricant like WD-40, a wire brush like # DW00254, and some patience. I have included a link to a video...
    view full answer...


Do you have a question about this Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Video Edited:
Zack K
Video Edited:
Joshua S
Expert Research:
Adam R
Photos by:
Amber A
Installed by:
Matthew S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924