Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling gear or cargo, this wheel’s 2,150-lb load rating gives you the strength margin you want for safe towing. The durable aluminum build delivers dependable performance while keeping weight down, so you get strength without unnecessary bulk.
This Sendel Series T07 wheel is built to handle moisture and road grime without showing its age. The rustproof aluminum construction and clear-coated front and back surfaces keep the finish looking sharp season after season, whether you’re traveling through humid climates or storing outdoors.
The 5-spoke V pattern in black with a machined silver face gives this wheel a clean, modern look that stands out. It’s part of the Sendel T07 line, known for combining form and function—so your trailer doesn’t just tow right, it looks right too.
The 15" x 6" wheel uses the common 5 on 4-1/2" bolt pattern with a 3.19" pilot diameter, making it easy to match with standard hubs and tires. With a 0 offset and 1/2"-20 wheel bolts, it fits cleanly in typical configurations and meets DOT specifications for reliability on the road.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this 15 inch by 6 inch wide Sendel Aluminum Series T07 V-spoke Black Machine Trailer Wheel with the 5 on 4 1/2 inch bolt pattern. Now, this is an aluminum trailer wheel, which is very durable, lightweight, and rustproof. This one is a Sendel Series T07 V-spoke design, you can see it has the five V-spokes all the way around, and what they do, it comes in a black with the machine silver face, so basically if you look close, the five V-spokes design has the black accent in between the spokes, and an on the top of the spokes, you can see they do a machine silver finish. The front and the back of the wheel are all clear coated for protection. This is a high quality wheel, it does meet the DOT, Department of Transportation Specifications.
Now, if you noticed, it does not have a center cap in it, the center caps are not included, we do sell those separately on our website, they're usually listed on this product page as a related product. If you do purchase the center cap, you wanna make sure you get one that has the pilot hole diameter, which is this measurement here, you have 3.19 inches. The wheel dimension, which is gonna be measured right in here, inside to inside, so if we take our tape measure, and if we go inside to inside, you can see there's your 15 inch diameter. The width on is measured the same way, it's inside to inside or bead seat to bead seat, you can see there's your six inches wide. Now, the bolt pattern on this wheel is a 5 on 4 1/2 inch bolt pattern, and if you wanna measure that on a wheel like this, it's a five lug wheel.
The holes are not directly across from each other, so the easiest way to measure it is just pick any one of the holes, let's say this one, and you can measure to either one of these, right across from it, but what you wanna make sure is when you measure, it's from the center of the starting hole to the furthest edge of whichever hole you measure to. So on this one, if we measured, it'd be 4 1/2 inches, so this is a 5 on 4 1/2 inch bolt pattern. This does use a wheel lug size of 1/2 inch by 20, and it does have a weight capacity of 2,150 pounds. But that should do it for the review on this 15 inch by 6 inch Sendel Aluminum Series T07 V-spoke Black Machine Trailer Wheel with the 5 on 4 1/2 inch bolt pattern..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
5/9/2025
Yeah shipping can be a little rough sometimes. But glad to hear your are like the wheels. That's wheely great!