This 15" x 6" trailer wheel has 6 on 5-1/2 bolt pattern and a 3.75" pilot diameter. The rustproof aluminum wheel features a 6-spoke design in black with a machined silver face.
Features:
Specs:
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
Measuring the distance from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Sendel 15-inch-by-six-inch Series T09 black machined aluminum trailer wheel with the 6 on 5-1/2-inch bolt pattern. Now, this is an aluminum wheel. It's very durable, lightweight, and rustproof. This is the Sendel Series T09, which is a six-spoke design, you can see. Has a glassy black finish to it.
And then if you look at the face of the spokes, they have a machine finish and even on the lip. Gives a nice shine to the wheel. Now, the front and the back of the wheel are clear coated. It is a high-quality wheel. It does meet the DOT, Department of Transportation, specification and the SAE J1204 standards.
Now, if you notice, it does not come with a center cap. If you do want a center cap, we do sell those separately on our website. You do want to get a center cap that'll have the same diameter as this pilot hole right here 'cause when you do install your cap, it'll go through this center hole. The pilot hole diameter is 3.75 inches. A few measurements on the diameter, which will be measured inside to inside.
So, if we take our tape measure and we go straight across, you can see there's your 15-inch diameter. The width on the wheel, same way, it'll be inside to inside or bead seat to bead seat. So, there's six inches for the width. Now, the bolt pattern on this wheel is a 6 on 5/12-inch bolt pattern, and if you want to measure that on a wheel that's an even number of lugs, like in this case, six, it's pretty easy because if you notice, the lug holes are directly across from each other. So, when you go to measure it, just pick any hole.
Let's say this one. Measure from the center of this hole directly across to the center of the one right across from it. So, on this wheel, it'll measure 6 on 5 1/2 inches. This does use a wheel lug size of a half inch by 20, and the weight capacity on this wheel is 3,200 pounds. But that's gonna do it for our look at the Sendel 15-inch-by-six-inch Series T09 black machined aluminum trailer wheel with the 6 on 5 1/2-inch bolt pattern.
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
This 15" x 6" trailer wheel has 6 on 5-1/2 bolt pattern and a 3.75" pilot diameter. The rustproof aluminum wheel features a 6-spoke design in black with a machined silver face.Great product!! Quick shipment as well!! Thanks!!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.