Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When weight and balance matter, this steel wheel takes it in stride. The 15" x 6" Dexstar Mini Mod trailer wheel is rated for 2,200 lbs and built from sturdy steel that stays true under full load. It meets DOT standards and pairs well with tires such as the ST205/75R15, giving you the strength and confidence to haul with peace of mind.
Rust is no match for the Dexstar’s two-step finish. The e-coat primer seals the steel, and the silver powder coat adds a smooth, durable layer that stands up to rain, road grime, and long-term use. It keeps the wheel looking clean while adding protection where it counts—on every trip and every launch.
Getting the right fit is easy with clear specs. This wheel uses a 5 on 5" bolt pattern, a 3.19" pilot diameter, and a zero offset for balanced mounting. Wheel bolt size is 1/2"-20, keeping your setup simple and reliable when matching hubs or replacing existing wheels.
Need space for higher tire pressure? The Dexstar AM20538DX easily handles up to 65 psi—well within the range of most heavy-duty trailer tires. With the correct valve stem such as part # AM20904, it can even support up to 80 psi, so you can dial in your setup without worrying about pushing limits.
The modular spoke pattern gives this wheel a classic, purposeful style that looks good while doing hard work. The symmetry of the round holes keeps the design strong but understated, adding a touch of polish without sacrificing any toughness. It’s a simple upgrade that makes any setup look put together and ready for the road.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Dexstar 15 inch by six inch silver modular steel trailer wheel, with the five on five inch bolt pattern. Now this wheel's a sturdy steel construction. We mentioned it's a modular design, and the modular design is the one that has the round holes that go all the way around the wheel. This wheel offers excellent corrosion resistance. It uses a two step finishing process, which first includes an e-coat primer on the wheel, and then a silver powder coat finish over it.
It is a high quality wheel. It does meet the DOT, Department of Transportation specifications. Now, if you notice the center cap is not included. If you do want a center cap, we do sell those separate on our website. You do wanna make sure to get a center cap that'll have the same diameter as your pilot hole right here.
The diameter on this hole is 3.19 inches. This wheel is made by Dexstar, which means it's made in USA. A few dimensions we're gonna measure is the diameter and the width of the wheel. And when you measure the diameter, what you're gonna measure is basically inside the inside. And the reason is 'cause when the tires not on here, the tire beads, you're gonna seat right here.
So that's basically what you're gonna measure. Bead seat to bead seat. So you can see if we go straight across, there's your 15 inch diameter, and if we do the width, it'll be the same way, bead seat to bead seat. Six inches wide. Now the bolt pattern on this wheel is a five on five inch bolt pattern.
And if you wanted to measure that on a wheel, it's an odd number of lugs, like in this case, five. What you'll need to do is just pick one of the holes, let's say this one, and then measure across to either one of these holes. But when you measure, it's from the center of the starting hole to the furthest edge of the hole that you measure to. So on this one, if we measure, it'd be five inches. So it's a five on five inch bolt pattern. Wheel lug size is a half inch by 20, and the weight capacity on this is 2,200 pounds. But that should do it for a look at the Dexstar 15 inch by six inch silver modular steel trailer wheel with the five on five inch bolt pattern.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Jack
6/19/2025
working out very good, no problems or issues
Jeffrey
6/22/2025
After using these tires for over a year now, I can honestly say they are the best trailer tires I have owned. My trailer handles better and tires wear better than any I have used before.
Ryan M.
12/13/2017
Thanks for checking. I live in Baton Rouge LA and one week after my review we experience record flooding. I actually used my new rims on my trailer to help transport Fire Dept rescue boats for flood victims. The rims spent their first week almost entirely submerged in water but have held up great. Timing on delivery could not have been better. I have recommended etrailer several times since.
Terry
2/27/2019
Everything going great. Got what I needed and it is working as expected.
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
11/24/2025
That is great to hear! I hope the install goes well for you. What kind of trailer are you installing it on?