This wheel stands out with its gloss black finish and machined spokes, then takes it up a notch with snap-in red inserts that sit flush in the spokes. The aluminum construction keeps the weight low and never rusts, so the look stays clean even after seasons of use. It’s a sharp, durable upgrade that catches the eye without overdoing it.
For smaller trailers or light-duty hauling, this wheel’s 1,740-lb load rating hits the sweet spot. You get solid strength without carrying unnecessary weight. It’s built to handle weekend trips, yard gear, or lighter loads with confidence and less strain on your setup.
Replacing an old wheel shouldn’t turn into a project. This one uses the standard 5 on 4-1/2 bolt pattern, so it bolts right up to most common 5-lug hubs without extra adapters or spacing issues. The pilot diameter is 3.19", and the wheel bolt size is 1/2"-20—straightforward specs that make fitment simple.
Unlike steel wheels that can flake and corrode over time, this aluminum design never rusts or peels. It’s built to handle outdoor storage or regular road use without losing its finish. Even in wet or humid conditions, you can count on it to stay solid and look good season after season.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a real quick look at this Aluminum AM06 series 13-inch Black Machined Trailer Wheel with Red Inserts. Now, this lightweight aluminum trailer wheel is gonna resist rust, and it features a gloss black finish with machine spokes, adding just enough contrast to stand out without being over the top. And as you no doubt have already noticed, this wheel does include easy-to-install red inserts, and I already have them installed in the wheel. When you receive this, you will receive the wheel with the inserts in a box, and then you'll just need to insert the, you'll just need to install the inserts. But I wanna go ahead and walk you through just how easy it is to install these inserts once you get this wheel.
And so I went ahead and secured all of them except this one here. There are bolts here that are going to come already installed in your wheel, and you're just going to remove those two bolts. And then you'll go ahead and pop this insert into place, just like that. And then this is going to come with a theft-deterrent tool to get those bolts back into place. So let me just show you how easy that's going to be and how quick it's going to be.
Now, what's nice about this wheel is, if you decide that you wanna remove these red inserts, that's not going to be a problem, because you can do that and you can just go with the standard black finish there without the inserts. Let me go ahead and insert this other bolt here. And you can also change up the color later on, too, if maybe you get a different trailer and it's not red, maybe it's blue, or you just wanna go with the blue color. We do have blue inserts available, as well. So as you can see, this is going to install very quickly, really, in just a a matter of seconds.
So I've gotten that tightened down there. So five inserts are going to be included to install this. So on your screen, I'm including some other options. If you wanna get the wheel, but instead of the red inserts, you want the blue inserts, I'm including the model number there for you on your screen. And then if you want the wheel without the inserts, that's fine, too, because we have this available without the inserts.
So I've got the model number there for you, as well. So you can get this wheel with the red inserts, is we're talking about here right now, the blue inserts, and by the way, here's what the blue inserts will look like, or with no inserts whatsoever. Now, this wheel is rated up to 1,740 pounds, and that's gonna be plenty for most small cargo, utility or boat trailers. It's gonna be a solid fit when you want to carry gear without stressing your wheel or wondering about the load limits. The dimensions of our wheel, diameter, measuring bead seat to bead seat, is 13 inches. And the width, again, bead seat to bead seat, is 4 1/2 inches. Our bolt pattern is 5 on 4 1/2 inches. The bolt wheel bolt size is 1/2 an inch by 20. And the pilot diameter is 3.19 inches. This does not include a center cap, so if you decide to pick one up, you just wanna make sure it fits that pilot diameter of 3.19 inches. Now, if you do decide to pick this up, we would love to hear back from you regarding how the installation went and how this looks on your trailer. You can actually send us photos when you leave a review on this product page, and I would really like to see what this looks like on your trailer if you pick this up. Now, if you have any other questions, don't hesitate to reach back out to us. We do wanna make sure that you're getting exactly what you want and need. Well, that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Excellent Priduct!! Fast Shipping!
great looking rims
Quality wheel that looks good.
Got them a day early, and WOW, they are absolutely beautiful. Love them, going on a food trailer, will send pictures when the trailer wrap is finished
Great looking wheel. Will look good on my Blue and Silver Skeeter trailer.
eTrailer has been outstanding to work with. Their customer service and delivery time line is excellent. I wanted a custom quality appearance to my equipment and received exactly what I wanted. I have purchased a few items from them and they have my recommendation.
The wheels look great! I do have one complaint about them. The red inserts come separate so you have to remove screws from the wheels. They are all very tight and the supplied wrench is of very poor quality. I literally broke 2 of them (both ends) trying to get one screw out of the wheel. I finally gave up and drilled the insert to go over the screw that would not come out. The tool is a hollow torx bit and not easy to find a good quality one somewhere else. There are 10 screws per wheel and I had to take out and put back 29 of them. It sucked. However, I got them mounted up on my trailer and they look great. If you buy these get ready for some tedious work installing the inserts.
They look great on my Scamp camper! I haven't put a mile on them yet but that will be the real test for a quality wheel.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.