To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch is rated for a 31,000 lbs gross towing weight and built from sturdy steel with a corrosion-resistant powder coat finish. The fixed, rail-free design drops directly into the underbed mounts for a solid connection. That kind of heavy-duty build gives you the strength and stability needed when you’re towing big fifth wheels on long hauls or rough roads.
The double-pivot head pivots both front to back and side to side, helping the trailer follow naturally through turns and dips. Three polyurethane dampeners cushion that movement and absorb road shock, cutting down on noise and jarring. The result is a quieter, more comfortable ride with less chucking between truck and trailer.


The single-piece wraparound jaw completely surrounds the king pin for 360-degree contact, giving a tight, rattle-free connection compared to slide-bar designs. A 3/4" thick solid steel locking bar spans the front of the jaw for extra security once coupled. The bar automatically locks when the jaw closes, so you get peace of mind knowing the trailer is locked in before you roll out.

Installation is straightforward—bolt on the side plates, attach the head, then drop the base into the four receiver pucks and lock it down with the spring-loaded handles and safety pins. When you want full bed space, unlock the handles, pull the pins, and lift it out. At about 140 lbs total weight and adjustable from 16" to 19" tall, it’s designed to make setup and removal manageable without giving up strength or towing capacity.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this Demco Hijacker UMS double-pivot fifth-wheel hitch. This fifth-wheel hitch is going to mount in the bed of your 2011 and newer Ford trucks with the factory prep package so you can tow your fifth-wheel trailer. This is gonna be very easy to get installed with that factory prep package. It is going to drop right into those four receiver pucks that are built into your factory underbed rail. So just remove the pin here.
You open these up and then set it down in those puck systems. And then by turning this, it is going to lock those in place so you have a nice firm connection to the rails underneath your bed. And you'll put that pin back in. Make sure that they're not able to wiggle their way out. So very easy to get this put in place.
And then that way you're taking full advantage of your underbed rails. You don't have to worry about rails up in your bed that can prevent you from having full bed access if you do want to remove the hitch to haul other things. So this is gonna be a really nice way of taking advantage of that system that you already have in your truck. This does have a sturdy steel construction, so it is going to give us a gross towing weight capacity of 31,000 pounds. Steel does have a powder coat finish on it to help resist rust and corrosion.
So it's gonna do a good job for us and last us a nice long time. Our jaw system here, it is going to be a wraparound single-piece jaw that provides a nice secure connection for our king pin. So if we open this up here, you can see how that jaw is going to wrap completely around our king pin. Very secure there with that 360-degree contact. So it is going to help to prevent rattling and give us more security than a slide bar jaw.
We also have this 3/4-inch-thick solid steel locking bar that's gonna reinforce that connection for our coupler trailer to automatically lock. It will automatically lock in place when the jaw closes. Very simple to operate that. We do have this spring-loaded handle here on the side that will allow us to open up those jaws, get them locked in place like so, so that we can then back up to our trailer, lining up our king pin into the opening there. And then as it makes contact, it's going to automatically close on its own. We'll then use the included pin and clip here that are tethered in place so we don't lose them. Just slide those in, and that's gonna make sure everything's locked in place when we're ready to disconnect. We'll kinda reverse that process, lock it out, and we'll put the pin back in place here, just so we don't have to worry about tripping that as we're backing up. It's going to ensure it stays open. And then we can very easily close it all back up when we're done towing or leave it open if we so choose. Make it one last step that we have to perform to get hooked up the next time. So very easy to use this handle here on the side. It doesn't come out very far, but it will be fairly easy to reach over your truck bed rails. This is going to have the double-pivot head, so it will pivot front and back and side to side. That's going to help ease your hook-up and to help prevent or limit your chunking. There are cushions, polyurethane dampeners. Don't know if you'll be able to see those. You can kinda see the blue right here through the center. Those are going to help dampen and reduce the noise, absorb your shock as your head is moving. And so it's going to be a little bit quieter for you. On the sides here, we do have our saddle bracket that will allow us to adjust our height settings from 16 inches to 19 inches. That's going to allow us to accommodate different setups, so you wanna make sure that you're getting that set to where it's gonna work best for you. They're just very simple. As you're putting this together, just determine which bolt holes to use, and that will allow you to accommodate those different, or to use those different height settings. This is made here in the U.S.A., so you can trust it is gonna be made to the quality standards that we've come to know and trust for products that are made here in the U.S. And really if you have the Ford prep package already, this is gonna be a great system to take advantage of that, make it very easy for you to just pop this down in place, hook it up, and be ready to hook up to your trailer. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Ratings & Reviews

Gwendolyn Y.
3/26/2026
Looks great, Cody. Where are you headed to first?

Don D.
4/12/2018
The hitch functions great but the finish is peeling off in places.

Phillip Z.
7/17/2017
After a year, my only complaint is still paintcoating.

Leslie P.
2/26/2017
Still very satisfied with the fifth wheel. Weve towed our 42ft fifth wheel with it several times without any problems with the hitch. Hopkins up and unhooking with no problems at all. We would highly recommend this product.

Troy
9/14/2019
Fantastic after a full year of use. 5er weighs 16k and no lurching. Also very nice when parking on an un level surface... Just hook up and go! I have done 9 trips with about 5k total miles so far. It is very easy to remove-even after back surgery. Highly recommend.

Mike L.
11/5/2018
The Demco Hijacker is compatible with any standard pinbox, and should work well with your new fifth wheel.

Jesse
2/17/2020
One year down and I am going strong with several more in the future! I have no complaints with this hitch. I recommend it to everyone that asks about it. Thanks again.

Mike
4/26/2020
Product still works great. Been almost 2 years and many thousands of miles. Product still looks great as well. Great job Demco.
Do you have a question about this 5th Wheel Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Robin H.
10/7/2026
Thanks for the detailed review! Glad to hear the installation went smoothly and you're happy with the features of the Demco hitch. Being able to remove the head separately definitely makes getting it in and out of the truck more manageable.