Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,500 lbs axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushing.
Features:
Specs:
Note: To ensure proper axle alignment and suspension performance, leaf springs should always be replaced in pairs.
Leaf springs are an integral part of your trailer suspension system. The leaf springs provide the attachment points for your trailer's axle, suspending it from the frame of your trailer. Each spring flexes to absorb road shock as you travel, allowing the axle to move somewhat independently of the rest of your trailer. This helps to reduce wear and tear on the trailer and also ensures a smooth ride.
Slipper leaf springs attach to hangers that are welded onto your trailer. The eye of this spring will attach to the front hanger with a suspension bolt. The slipper end of the spring will slide into the rear hanger. If you have a tandem- or triple-axle trailer, the slipper end will slide into the equalizer that connects multiple springs. The shape of the slipper end of a leaf spring may vary slightly due to differences among trailer manufacturers. Because of this, it's important to check your leaf spring's slipper end before purchasing a replacement spring.
To mount this spring, you will need hangers, a suspension bolt, and possibly a spring keeper bolt, depending on the design of the rear hanger. If you are simply replacing a spring, you may still have hangers welded onto your trailer, but it would be wise to replace the bolts as they can experience wear. It is also recommended that you replace the other leaf spring in your setup at the same time. Because springs can sag and elongate as they wear, this new spring may not exactly match the old one, and the alignment of your trailer could be affected.
If you are fabricating a trailer, you will need to purchase a hanger kit for installation. To determine the type of hanger kit that you need, you must know the specific type of leaf spring that you have, as well as your axle capacity. Depending on the hanger kits used with them, springs can be configured to work for single-, tandem- or triple-axle applications. Hangers and other suspension components can also be purchased separately if there isn't a complete kit that works for your setup.
California residents: click here
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
Ratings & Reviews
Good efficient job
Super fast shipping. Received ahead of time! Packaging of the item was my only deficiency. Will purchase again!
I wish I had realized the bushing were not in there I had to reorder the bushings as well as figure out which ones fit . a link would be helpful . This is all my doing as I didn't pay attention to the details The pic shows no bushing . The part arrive early and was correct.
Do you have a question about this Trailer Leaf Spring?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.