Slipper Leaf Spring Solution for Replacing 28 inch Long Spring on Trailer with 1,990 GVWR
Published 03/11/2022
Question:
Looking for a pair of leaf springs for my boat trailer. GVWR is 1990. 1 3/4 wide, 3 leaf. Measurements are as follows. A - 12 B - 28 C - 13 1/2 D - 16 1/4 E - 5 Not sure what would work best. Thanks for any help.
asked by: Cam S
0
Expert Reply:
The closest leaf spring solution we have for what you have now is the part # DX93QR which is for a 2,500 lb axles. The dimensions are close enough to what you have to fit as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter 4-Leaf Slipper Spring w/ Hook End for 2,500 lb Trailer Axles - 26-3/4" Long
- Trailer Leaf Springs
- Slipper Springs
- Nylon Bushings
- 2500 lbs
- 2 Inch Wide
- 4 Leaf
- 26-3/4 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Q&A: Looking For Replacement For Hub Seal Victor 47445
- Q&A: Trailer Slipper Spring to Replace Dexter 072-032-00 Spring
- Q&A: Recommended Bearing Protectors for a Boat Trailer w/a 1.98" Inner Hub Diameter
- Q&A: Can Radius End Leaf Spring Be Used to Replace Flat End Leaf Spring
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement 1-3/4 Wide 25-1/2 Long Slipper Leaf Spring
- Q&A: Where Should Rear Hanger Location be for Slipper Springs
- Q&A: Replacement Leaf Springs for Trailer With 25-1/4" Flat Leaf Spring
- Article: How to Raise Your Travel Trailer Height
- Article: Most Popular Wheel Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Brake Controller Installation on a Ford Full-Size Van
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams