Dimensions Of Slipper Spring Width Of Dexter Leaf Spring # DX93QR
Updated 06/07/2022 | Published 06/04/2022
Products Featured in This Question
Question:
In the description it says both 1 34inch and 2 inch which is it?
asked by: Chris
Expert Reply:
The Dexter Axle 4-Leaf Slipper Spring w/ Hook End for 2,500 pound Trailer Axles - 26-3/4 inch Long # DX93QR has a slipper width of 2 inches. The site has both 2 inches and 1 3/4 inches but 2 is the correct measurement.
To mount the double eye spring over The U-Bolt Kit for Mounting 2,000-pound, Round Trailer Axles - 4-1/4 inch Long U-Bolts # APUBR-10 is needed, and finally The Spring Seat for Typical 2,000-pound, Round Trailer Axles with 1-3/4 inch Diameter - Qty 1 # TRSS175.
I attached a review video link that states measurements below.
Product Page this Question was Asked From
Dexter 4-Leaf Slipper Spring w/ Hook End for 2,500 lb Trailer Axles - 26-3/4" Long
- Trailer Leaf Springs
- Slipper Springs
- Nylon Bushings
- 2500 lbs
- 2 Inch Wide
- 4 Leaf
- 26-3/4 Inch Long
- Standard Grade
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Search Results: ez lube grease cap trailer bearings races seals caps
- Search Results: ez lube
- Search Results: ez lube trailer hubs and drums
- Search Results: wheel bearing kit
- Search Results: easy grease
- Article: Trailer Wiring Diagrams
- Q&A: What Gauge Wire Is Required On a 7-Way Connector
- Shop: Optronics Thinline LED Utility Light - Submersible - 386 Lumens - Clear Lens - 12-5/8" Long
- Article: Trailer Tire Sizing
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Video: Torflex Lift Kit Feature Review
- Q&A: How to Select Replacement Hub for Fleetwood Coleman Destiny Pop-Up Camper
- Article: How to Raise Your Travel Trailer Height
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Best Parts to Upgrade a Harbor Freight Trailer
- Shop: Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" Long - 3.5K
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Search Results: trailer wire gauge
- Video: All You Need to Know About the Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Shop: Brake Controller
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Q&A: Recommended Wire Gauge for Wiring Trailer Brakes
- Q&A: What is the Minimum Space Between Tires on a Tandem Axle Trailer
- Q&A: Comparing a 5.30x12 and 5.70x8 Trailer Tire
- Q&A: Recommended Tires For 1994 Coleman Destiny Cedar XL With 5.30x12 Tires