Replacement Rear Hanger for Shorelandr Boat Trailer with 1-3/4 Inch Wide Slipper Springs

Updated 02/11/2016 | Published 02/10/2016

Products Featured in This Question

2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long

(640)

$28.05

Rear Hanger for 1-3/4" Slipper Spring

(94)

$6.02

CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1

(64)

$18.00

Question:

Hi there, I have an old boat shorelander trailer. It has a 2,000-lb axle supported by a 2-leaf slipper spring on each side. On the right side the rear hanger of the spring got broken off. The 2-leaf slipper spring is 30-1/4inch long x 1-3/4inch wide. Any replacement hanger you recommend to buy? Appreciate your advice in advance.

asked by: Alex

Helpful Expert Reply:

If you are looking for a weld-on option we have 1 rear slipper spring hanger that fits 1-3/4 inch wide trailer suspension slipper springs. It is # 115706S. Please note that any welding should be performed by a professional welder.

For a bolt-on option we have # CE14017G. I have also included a link to our help article on slipper spring suspension for you.

expert reply by: Michael H