Do Slipper Spring Rear Hangers Require Bushings
Updated 02/02/2016 | Published 02/01/2016
Question:
Is it necessary to use some kind of bushing in these bolt-on brackets for the slipper springs?
asked by: Johnnie D
0
Expert Reply:
Nope, the slipper spring rear hangers like the part # CE14017G do not require the use of a bushing between them and the spring.
I attached a picture that shows how it will look when it is installed.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Trailer Suspension Parts
- Hangers
- Boat Trailer
- Snowmobile Trailer
- Slipper Springs - 1-3/4 Inch
- 1-3/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Q&A: Can Trailer Suspension Hangers be Bolted On
- Video: What to Know About the CE Smith Rear Hanger Bracket for Trailer Slipper Springs
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Video: All You Need to Know About the CE Smith Front Hanger Bracket for Trailer Slipper Springs
- Q&A: Bolt On Slipper Springs for 1-3/4" Wide Slipper Springs on a Small Single Axle Trailer
- Q&A: Are Taller Hangers Available For A 1-3/4" Wide Slipper Spring
- Shop: CE Smith Front Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Shop: CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Shop: Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
- Video: An In-Depth Look at the Rear Hanger for 1-3/4" Slipper Spring
- Q&A: How To Mount Redline Rear Hanger # 30-20 On A Trailer
- Q&A: Replacement Wet Bolts For A MORryde CRE3000 Suspension
- Q&A: Mounting a Rear Slipper Spring Hanger
- Q&A: Do Trailer Slipper Springs Normally Slip Out of their Rear Hangers
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Search Results: trailer wiring
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)