If you’re stepping up from old incandescent bulbs, this light makes a big difference. The TecNiq High Visibility Stop Turn Tail Light uses eight LEDs to deliver clear, bright signals while drawing just 0.11–0.15 amps at 9–14 VDC. That means you get crisp visibility for stop, turn, and tail functions without putting a strain on your electrical system. Rated for over 100,000 hours of service life, it’s built to last for years of dependable use.
Rain, dust, or road spray won’t slow this light down. The TecSeal urethane potting and IP68 hermetic seal keep moisture and grit completely out of the housing. Even in harsh conditions, the circuits stay protected so the light keeps working exactly as it should. With its impact-resistant, UV-stable polycarbonate lens, you don’t have to worry about cracking or fading over time.
Installation is straightforward thanks to its grommet-mount design that matches industry-standard 4-inch round openings. Just drop it into place—no drilling or modifications needed. The tri-pole connector makes wiring simple with color-coded leads: white for ground, red for stop/turn, and black for tail. Once mounted, it sits cleanly and securely without extra hardware getting in the way.
Keeping your trailer visible and compliant is key for safety on the road. This light meets FMVSS 108 requirements for both wide and narrow vehicles, so you can trust that its brightness and beam pattern meet federal standards. It’s not just bright—it’s certified to perform where it matters most, helping other drivers clearly see your signals day or night.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone, Steven here with etrailer.com. Let's take a look at our TecNiq High Visibility Stop Turn and Taillight. It's a four-inch round and it's a grommet mount. Now, folks, there's no grommet included and there's also no tripole connector included. I just have some wires kind of alligator clipped in the back today with my little test box to show you this lit up. So you would need to purchase if you don't already have, separately, a grommet and a tripole connector for this to work.
Now, as you can see, you've got your running lights, and then if you hit the brake lights, they're gonna be brighter than the running lights. And this is a great option for you, again, as either a replacement or an upgrade. You wanna be safe and you wanna be visible while you're on the road, and this will do just that. So again, you got two different intensities, running and brake lights. And again, folks, this is gonna be a great replacement or an addition, depending on what you need for your specific trailer.
And as you can see, again, you need that tripole connector in the back, and that would plug right into that connection. Overall, it's about 1 1/2 inches deep including that back connector port, and it's 4 1/4 inches technically overall on the diameter. (light thudding) Well, folks, that will wrap it up for our quick look together. I'm Steven, thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.