Build an RV sliding cargo tray with this rail kit, a tray trim kit (sold separately), and plywood bottom (not included) to easily retrieve gear from your compartment. Included rails slide tray out so you don't have to crawl into your compartment.
Features:
Specs:
Pair this rail kit with a tray trim kit (sold separately) and a carpet-covered plywood bottom (not included) to create a complete slide-out tray for the cargo compartment in your RV or camper. The complete tray lets you store and organize camping and hiking gear, tools, and power cords, so your compartment doesn't become too cluttered. It also glides out when you need it so that you don't have to crawl into the dirty or cramped compartment in order to retrieve your belongings.
Determining Which Rail Kit and Tray Trim Kit You Need
To determine which rail kit you need, simply measure the overall inside length of your cargo compartment. Whatever measurement you get is the maximum length of the rail kit that you will need. For example, for this 22" rail kit, your cargo compartment should measure at least 22" long. If your cargo compartment is a lot longer than 22", you will need a SuperSlide I or SuperSlide II rail kit.
The tray trim kit you can use to complete your storage slide-out tray assembly is sold separately (LC380319). This trim kit measures 32" long, and it fits cargo compartment openings no smaller than 36". This ensures that the tray would have the proper clearance as it slides in and out.
This rail kit includes pre-assembled rail assemblies. First you will need to install all of the pieces of the tray trim kit (sold separately) to the rails. Then install the carpeted wood bottom to the rails with wood screws (not included) for a full-length tray floor.
Once the tray has been completely assembled, place it onto the floor of the cargo compartment, and make sure there's adequate clearance for the compartment door. Depending on your setup, you may need to raise the outer rails with 2x4s (not included). Once the tray is fully aligned, use the integrated mounting tabs on the rails and hardware (not included) to bolt it down.
Average Customer Rating: 4.9 out of 5 stars (56 Customer Reviews)
Build an RV sliding cargo tray with this rail kit, a tray trim kit (sold separately), and plywood bottom (not included) to easily retrieve gear from your compartment. Included rails slide tray out so you don't have to crawl into your compartment.
Got a heck of a deal on these slide ends
Exactly what I ordered and arrived on t ime.
Do you guys make like a 18” or 20” had to shorten the 22” great product thanks let me know about the shorter ones please.
Delivered early. Just what I was looking for. Thank you for the service.
I used this to mount my Dometic 75 CFX refer. worked out perfectly. The slide is high quality and easy to mount. I use 1/2" plywood for the deck. I highly recommend this slide.
Great product. We use them for Fridge/Freezer combo in the basement of our motor coach.
Good product and relatively easy to install. It is in a compartment that is under one of our slides and hard to access so this makes a difference.
Ordering from etrailer online was easy and fast. e-mails keep me posted on the status and delivery was on time with no damage to the box or items.
I will order from them again.
I’ve been looking for a storage slide system for quite a while. The size, weight rating works great for my CamperVan that I call the WanderWagon. Fast delivery, price, and high quality makes your company a “go to” source for me.
Just what I expected. Well built, high quality construction.
This is second set of tracks I’ve bought from e trailer. Service and product is outstanding. We use the tracks in our real estate Auction mobile office. They slide in an Ouch effortlessly I highly recommend this product
Good solid product and relatively easy to install. A couple of things to watch out for include, the height of the lip of the storage compartment. After installing mine, I found that the sliders were catching on the rubber seal of the compartment door. I had to uninstall everything and build a base that raised the sliders by an inch. The other problem I encountered was the locking mechanism, (located on the right slider) was catching on the power cables coming out of the side of the fridge. The locking mechanism is 'fixed' so I had to cut it off with a grinder and move it to the left slider. It would be advantageous if the lock could be easily moved without using a grinder! The pictures on this site show the lock on the right slider, but the installation instructions show it on the left slider. If there was an option to order either left or right when purchasing, I did not see it.
Excellent, still working 12/7 under heave abrasive conditions.
Will DEFINITELY us on our next project.
It worked out great. Did a little modification so it would not go back inside when running the Jaws.
I purchased this rail kit because none of the prefab trays fit my RV. This kit was the closest thing to my 27" deep hold. The write up from the manufacturer did not have the detailed measurements to allow me to pre-design the tray, like minimum height for slides, dimensions including slide inside rail to outside. When I got the slides, the product info provided no additional information. After measuring those dimensions I was able to design a tray and install the completed cargo tray. The slides are heavy duty and work well. I have no concern about capacity. The 100% travel is nice since my tray overhangs front and rear. The Rails have to be installed 1 inch behind the closed door to allow for the latch handle. Now, if they only made one 48" deep.
After 1 year installed in my motorhome this slide is solid. I have a heavy toolbox on it and it still works great. This is a well made product.
I drive into the mountains, just a few miles from home, to photograph the night sky as often as I can. There are precious few clear nights and even fewer windless nights. So I have to set up a wind block pretty much every time I go out. To anchor it I carry about 170 pounds worth of tent pole weights and place them on studio light stands, from my portrait studio, around which I stretch a 10x20 foot muslin fabric.
The weights are contained in a box I built for them that sits in the back corner of the pickup bed. The problem was that the weights are difficult to lift in and out when I had to reach so far into the bed. I needed a way to slide the box out onto the tailgate but, of course it is too heavy to move.
In my search for a solution, I came across the “Rail Kit for Kwikee RV Storage Slide Out Tray Assembly 22” Long-200 lbs. from etrailer.com. George and Hally C. were quick to respond and easy to work with. I’m in the process of finishing it off with a slick plastic piece to support the box as it slides backwards. The slides themselves are heavy duty and very smooth in operation.
Always fast shipping and great prices. Stands behind there products
Do you have a question about this RV Cargo Slide?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.