See what our Experts say about this Yakima Roof Rack

• Yakima Flush Mount Roof Rack For 2022 Honda Pilot With Flush Side Rails
  There is indeed a Yakima flush mounted roof rack with crossbars that do not go past the roof for your 2022 Honda Pilot with flush-mounted rails. All you need for this roof rack is the following: - Yakima SkyLine FX Roof Rack # Y86UV - Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245 Additionally, I do recommend considering adding locks to the rack to lock it to your Pilot; you can add those with the Yakima Same Key System (SKS) Lock Cores # Y07204.
  view full answer...
• Will the Yakima SteelHead Roof Mounted Bike Carrier Fit Aero Crossbars on a 2017 Toyota Highlander
  In order to use the Yakima SteelHead Roof Mounted Bike Carrier on your 2017 Toyota Highlander you would need to install a round bar system like the Yakima Roof Rack System part # Y00408, part # Y53TR, part # Y03536, and part # Y00242 if you have flush side rails or the Yakima Roof Rack System part # Y00409, part # Y28TR, part # Y03536, and part # Y06130 if you have a bare roof. If you want to keep the roof rack you have now then I recommend selling the SteelHead and buying the Yakima...
  view full answer...
• Installing Roof Rack on 2019 Toyota Highlander w/ Flush Rails & Can it Use Longer Crossbars Bars
  Good questions so let's start with the installation of the roof rack feet on your 2019 Toyota Highlander and you do need to install the feet at the locations indicated in the directions, which is what we show in the linked installation video. A short crossbar spread really is a positive, as it allows you the use of more accessories, which will fit that spread compared to what looks to be a very long spread if you install the fit in different mounting locations. You can use longer crossbars...
  view full answer...
• Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof Tent
  The Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
  view full answer...
• Recommended Platform Rack System without Crossbars for 2019 Toyota Highlander XLE
  For a low profile platform style rack similar to a Rhino Rack Backbone System, the only available option is the Yakima Roof Rack and Platform System that uses parts # Y05045, # Y53TR, # Y05042-2, # Y00242. This kit combines the Yakima Lock N Load Platform # Y05045 and Yakima Skyline towers # Y53TR to give you the platform without a crossbar for the low profile setup you're looking for. The additional parts are for the footpack and adapters to allow you to mount the towers to your 2019...
  view full answer...
• Roof Rack Recommendation to Carry Thule Pulse Box on 2018 Toyota Highlander
  In order to carry the Thule Pulse Large Rooftop Cargo Box # TH615 on your 2018 Toyota Highlander you will need crossbars that are perpendicular to your vehicle body so that the box can be parallel with the vehicle body. I really like the Yakima JetStream roof rack system because the crossbars are higher quality with that aero-style design and the legs have adjustments so you get the best fit possible. I'm guessing you have a naked roof but in the event that you do have the flush mount rails...
  view full answer...
• Yakima Roof Rack Landing Pad 16 Wont Line Up On 2019 Toyota Highlander
  There are two roof configurations on a 2019 Toyota Highlander, bare roof and flush side rails. The Landing Pad 16 part # Y00242 is designed for models with flush side rails. If you have a bare roof you need to use the BaseClip Fit Kit part # Y06130. I think you might be looking at the pre-drilled holes in the roof used to attach the flush side rails from the factory and if so these can't be used and you would have to use the rack for bare roof models. I have attached a video below of the...
  view full answer...
• Recommended Roof Rack to Use the Yakima SideWinder on a 2018 Toyota Highlander LTD
  I recommend installing a Yakima JetStream roof rack on your 2018 Toyota Highlander because they provide a clean looking installation that allows you to utilize the full 165 lb weight capacity and can be keyed alike with your SideWinder # Y02071. If you have a naked roof (no rails running from front to back) then you need the 60" JetStream Bars # Y00426 the BaseLine Towers # Y28TR, and the BaseClip # Y06130. For flush mount rails you would instead need the 50" JetStream Bars # Y00425,...
  view full answer...
• Roof Rack For 2018 Toyota Highlander w/ Flush Mount Rails For Rooftop Tent
  We have a roof rack and rooftop tent for your 2018 Toyota Highlander with flush mount rails, though the crossbar spread on your Highlander is set at 27-1/2 inches. The reason for that is roof racks install at fixed mounting points on the rails, which means a tent requiring a larger spread won't work. That said, there is still a really nice option for a rack and tent for your '18 Highlander, and let's go ahead and start with the rack you'll need, which is from Yakima: - Yakima JetStream...
  view full answer...
• Can Two Sets of Yakima Y04073 JayLow Kayak Carriers Fit on 2018 Toyota Highlander Factory Roof Rack
  Each of the # Y04073 JayLow kayak carriers will take up approximately 10.3 inches of space on the crossbar. Factory crossbars won't extend past the roof side rails, so even though you should be able to fit two sets of the carriers on the roof, you might not be able to place them far enough apart on the crossbars to accommodate the two kayaks you'll want to place in the center. What I'd recommend you do is measure the length of your factory crossbars, and compare that to the combined width...
  view full answer...
• Recommended Roof Rack For A 2019 Toyota Highlander To Carry A Thule Hullavator 898
  In order to use the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading, part # TH898, on the roof rack of your 2019 Toyota Highlander, the crossbars need to extend between 4" and 8" past the the towers/feet. My recommendation would be to go with a 60" crossbar for your roof rack. I have two roof rack recommendations for you. The first rack is for a Highlander with flush rails. It will consist of the following items: Yakima CoreBar Crossbars - Steel - Black...
  view full answer...
  
• 2014 Toyota Highlander Yakima Rack Fit W/ Round Crossbars
  It really depends on the accessory in question. Most rack manufacturers are going with elliptical shaped bars. These bars help with wind noise and fuel efficiency. Oftentimes, these racks will utilize crossbars with t-channels. Now if your accessory does not have the ability to attach to a t-channel it will have to clamp to the crossbars. If your accessory is designed to only clamp round or square crossbars you will need an adapter, but not all accessories are compatible with an adapter....
  view full answer...
• What Parts are Needed to Install a Yakima RoundBar Crossbars for a 2018 Highlander?
  If you are trying to use the same round crossbars for the flush rails on your 2018 Toyota Highlander, you will need three parts: 1. SkyLine Towers for Yakima Crossbars # Y53TR 2. Landing Pad 16 for Yakima SkyLine and Control Towers # Y00242 3. RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536 These are all you need to adapt your existing setup on your 2008 Toyota Highlander.
  view full answer...
  
• What Do I Need To Install The Yakima RocketBox 14 On My 2015 Toyota Highlander
  First let's get you a roof rack system! I also like the Yakima Jetstream Bars # Y00425. If you have flush rails on your 2015 Toyota Highlander then you'll need the SkyLine Towers # Y53TR and the Landing Pad 16 # Y00242. If you have a naked roof, still grab the Jetstream bars along with the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06130. You won't have any issues with opening the rear hatch. If you take a look at the video attached, the RocketBox has plenty of room on a 2012...
  view full answer...
• Recommended Roof Rack To Carry Kayak And SUP On A 2016 Toyota Highlander LE Plus
  I do have a roof rack to fit your 2016 Toyota Highlander LE Plus. Your options will be based upon what type of roof you have on your vehicle. If you have flush rails on your vehicle, your roof rack will consist of the following items. Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2, part # Y00421 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4, part # Y53TR Landing Pad 16 for Yakima SkyLine and Control Towers - Qty 4, part...
  view full answer...
• Will Yakima CoreBar Roof Rack for 2015 Toyota Highlander Allow fit Yakima Showdown Kayak Carrier
  I checked with Yakima just now and they have their Showdown Assisted Kayak carrier part # Y04081 as a fit with the CoreBar roof rack you also mentioned part numbers # Y00421, # Y53TR, and # Y00242. The bars are long enough for the carrier to fit and work well but wouldn't be obnoxiously long. You wouldn't have to worry about hitting your head or anything.
  view full answer...
• How To Carry a Cargo Box and Two Kayaks On a 2015 Toyota Highlander with Flush Rails
  In order to carry a cargo box and two j-style kayak carriers on a 2015 Toyota Highlander with flush rails you'll need to use at least a 70" crossbar. The problem with this is that most crossbars only have a certain amount of channel underneath to attach to the mounting feet so you can't just use order a larger bar. The Yakima Corebar however does not have this channel underneath so you can use part # Y00423 with part # Y53TR and part # Y00242 to fit all your accessories.
  view full answer...

Do you have a question about this Roof Rack?